attuatore dimmer per ballast elettronici (1-10v) - 3 canali ... - Gewiss

More documents

Recommendations

Info

MESSA IN FUNZIONE DELL’UNITÀ DI COMANDO Rischio di lesione fatale: Gli interventi sull’unità possono essere eseguiti soltanto da elettricisti qualificati. Rispettare i regolamenti vigenti nel paese di utilizzo del dispositivo, unitamente alle direttive EIB vigenti. 1 Caricare l’indirizzo fisico nell’ingresso binario da ETS via EIB. 2 Eseguire le impostazioni di configurazione in ETS e trasferirle. DATI TECNICI Alimentazione dal bus: DC 24 V / circa 17,5 mA Tensioni di isolamento: AC 4 kV bus/tensione di rete e bus / 0-10 V AC 4 kV 0-10 V - tensione di rete Contatto di commutazione: contatto di chiusura, flottante Dati di connessione per ogni canale: Corrente nominale: 16 A; carico induttivo a cos ϕ = 0,6 Lampade a incandescenza: 3600 watt Lampade alogene: 230 V AC 2500 watt Lampade alogene (LV): max. 2000 W tramite trasformatori elettronici (per es. 14 MET S 105 W) Lampade fluorescenti: 3600 VA non compensate Carico capacitivo: 3600, 200 μF Protezione: Il contatto di commutazione deve essere protetto da un sezionatore 16 A collegato in serie. Durata di servizio: > 50.000 cicli di commutazione al carico nominale 0- 10V/1-10V Interfaccia: 0-10 V per ballast elettronici dimmerabili, trasformatori MET S (possono essere regolati tramite parametri) Capacità di carico: max. 100 mA (max. 50 ballast elettronici, a seconda dei ballast elettronici) Tensione di comando min.: 0 V Temperatura ambiente: - Esercizio: da -5 °C a +45 °C - Conservazione: da -25 °C a +55 °C - Trasporto: da -25 °C a +70°C - Umidità max.: 93 % - Ambiente: Il dispositivo è progettato per l’uso fino ad un’altitudine d’installazione di 2000 m s.l.m. Connettori: - Bus: tramite due pin da 1 mm per morsetto di collegamento al bus - Conduttore sotto tensione e uscita di commutazione: morsetti a vite a 3 vie per max. 2,5 mm 2 - Uscita 1-10 V: morsetti a innesto a 2 poli con collegamento a vite per max. 2,5 mm 2 Tipo di protezione: IP 20 Direttive CE: conforme alla Direttiva 73/23/CEE sulla bassa tensione, conforme alla Direttiva EMC 89/336/CEE Dimensioni: 90x72x65 mm (HxLxD) Larghezza del dispositivo: 4 TE = 72 mm GEWISS - MATERIALE ELETTRICO SAT +39 035 946 111 8.30 - 12.30 / 14.00 - 18.00 for monday to friday +39 035 946 260 24 hours/day SAT on line @ gewiss@gewiss.com
GB DIMMING ACTUATOR FOR ELECTRONIC BALLASTS (1-10V) - 3 CHANNELS WITH MANUAL OPERATION Article no. GW 90 747 A B C D E F G Bus coupler (built-in) Dimming actuator for electronic ballasts (1-10V) Electronic ballast with 0-10V/1-10 V interface Electronic transformer with 0-10V/1-10 V control input To other devices with 0-10V/1-10 V interface LV halogen lamps Fluorescent lamp OPERATING AND DISPLAY ELEMENTS 1 RUN 2 ® instabus EIB EIB KNX 3 EIB SYSTEM INFORMATION This device is an EIB system product and conforms to KNX directives. Detailed expertise gained through training in the BUS system is a prerequisite. The function of the device depends on the software used. Detailed information on which software can be loaded and the range of functions associated with each type of software, and the software itself, are available from the Gewiss product database. Planning, installation and commissioning of the device are carried out using KNX-certified software. The product database and the technical descriptions are updated regularly and can be found on the Internet at www.gewiss.com. WHAT YOU CAN DO WITH THE CONTROL UNIT The dimming actuator for electronic ballasts 1-10V (GW 90 747) dims and switches fluorescent lamps via electronic ballasts with a 0-10V/1-10 V interface and LV halogen lamps via transformers with a 0-10V/1-10 V interface. The control voltage range can be set with the ETS via a parameter. Connection example 1 Programming button/Programming LED, red 2 Operating LED, green 3 Manual switch HOW TO MOUNT THE CONTROL UNIT Risk of fatal injury from electrical current. During installation, the safety regulations specified in EN 50105 must be observed. The device may only be installed by skilled electricians. Otherwise, there is a risk of fire or electrocution. The dimming actuator for electronic ballasts is a DIN rail mounted device and is mounted onto a DIN rail. A data rail is not required. The bus connection is carried out via the bus connecting terminal supplied with the device. The cable cover is then placed over the bus connecting terminal to guarantee the safety clearance of the bus cable to the 230 V cables. A maximum of four core pairs can be connected to the bus connecting terminal. The cables are connected via terminals: 2 screw terminals for live conductors 1 screw terminal for switched live conductor 2 plug-in terminals for 0-10 V The cables of the 0-10V/1-10 V control voltage can be connected to the terminals prior to installing the device and then inserted at a later date. Bus + - F G A 12V AC B C D 0-10V 0-10V 0-10V L - + L N - + L N - + L1 N Caution! Disconnect the mains voltage before connecting the device to the load. Do not insert the terminal when it is under load. All the devices that are mounted next to the control unit must at least be fitted with basic insulation. The green operating LED only lights up if the application program has been loaded correctly into the device. Any switch output (switched live conductor) can also be operated manually without bus voltage using the manual switch. HOW TO PUT THE CONTROL UNIT INTO OPERATION Risk of fatal injury: All work carried out on the unit may only be performed by skilled electricians. Observe the regulations valid in the country of use, as well as the valid EIB directives. 1 Load the physical address into the device from the ETS via EIB. 2 Make the configuration settings in ETS and transfer them. E
Page 1: I ATTUATORE DIMMER PER BALLAST ELET

attuatore dimmer per ballast elettronici (1-10v) - 3 canali ... - Gewiss

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?