Notice - Lanaform
Notice - Lanaform
Notice - Lanaform
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EN<br />
CHARACTERISTICS<br />
• The body of the hot water bottle is flexible and very comfortable.<br />
• The walls protecting the inner bag are made of 4 thin layers of thermo-compressed foil, improving its solidity and<br />
safety.<br />
• The technology used means that the hot water bottle heats up quickly and retains its heat for longer.<br />
HOW TO USE<br />
Charging your “Bouill’hot” hot water bottle<br />
1. Lay your hot water bottle flat on a table.<br />
2. Insert your hot water bottle into the charger as shown in the diagram (figure 1).<br />
Connect the charger plug to the mains. The indicator will come on and the hot water<br />
bottle will heat up.<br />
3. When the water in the hot water bottle reaches a temperature of 70°C, the indicator<br />
will go out and you can disconnect the charger. You can now use the hot water bottle.<br />
(figure 2).<br />
Hint: if you want your hot water bottle to stay warm for longer: After heating for the first<br />
time, knead the hot water bottle so that the water is mixed and then charge it a second<br />
time.<br />
Comment: The charging time for the bottle is about 10 minutes (depending on the<br />
ambient temperature) and the surface of the hot water bottle will reach a temperature<br />
of about 60°C.<br />
MAINTENANCE AND CLEANING<br />
Storage<br />
• Place the hot water bottle in its box or in a dry place.<br />
• Avoid letting it come into contact with sharp edges or other pointed objects that might cut or pierce the fabric surface.<br />
• To avoid breaks in the power lead, do not coil it up.<br />
• Make sure that the hot water is properly dry before storage.<br />
Cleaning<br />
• Disconnect the hot water bottle from the charger plug and wait for a few minutes before cleaning.<br />
• Clean it with a soft, slightly damp sponge.<br />
• Do not immerse it in liquid to clean it.<br />
• Never use abrasive detergents, brushes or a thinner to clean it.<br />
ADVICE REGARDING THE DISPOSAL OF WASTE<br />
• All the packaging is composed of materials that pose no hazard for the environment and which can be disposed of at<br />
your local sorting centre to be used as secondary raw materials. The cardboard may be disposed of in a paper recycling<br />
bin. The packaging film must be taken to your local sorting and recycling centre.<br />
• When you have finished using the device, please dispose of it in an environmentally friendly way and in accordance with<br />
the law.<br />
4
Change language