flexible conduit system s
flexible conduit system s
flexible conduit system s
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RIFERIMENTI NORMATIVI<br />
Normative References<br />
CEI EN 50102<br />
Gradi di protezione degli involucri per apparecchiature<br />
elettriche contro impatti meccanici esterni<br />
(Codice IK)<br />
La presente norma fornisce un sistema per la classificazione<br />
dei gradi di protezione degli involucri per apparecchiature<br />
elettriche contro impatti meccanici esterni. L’adozione,<br />
quando possibile, del sistema di classificazione considerato,<br />
favorisce l’uniformità dei metodi di descrizione della protezione<br />
fornita dagli involucri e nelle prove per la verifica dei<br />
vari gradi di protezione (IK).<br />
Codice IK<br />
IK code<br />
Energia di impatto in Joule<br />
Impact energy in Joule<br />
UNI CEI EN 11170-3:2005<br />
Veicoli ferrotranviari<br />
Linee guida per la protezione al fuoco dei veicoli ferrontranviari<br />
ed a guida guidata. Valutazione del comportamento<br />
al fuoco dei materiali. Limiti di accettabilità.<br />
ALTRI RIFERIMENTI<br />
Norme riferite al comportamento dei cavi che presentano<br />
una resistenza intrinseca al fuoco, sono utilizzate come<br />
riferimento per la conduzione delle prove di verifica<br />
dell’integrità funzionale nelle scatole di derivazione per<br />
applicazioni nelle gallerie, come previsto nel Documento<br />
A.N.A.S. “Linee Guida per la progettazione della sicurezza<br />
nelle gallerie stradali”.<br />
NF C 32-070<br />
Conduttori e cavi isolati per installazioni<br />
Prove per la classificazione rispetto il comportamento al<br />
fuoco.<br />
CEI EN 50362<br />
Metodo di prova per la resistenza al fuoco di cavi per energia<br />
e comando di grosse dimensioni (con diametro esterno<br />
superiore a 20 mm) non protetti per l’uso in circuiti di<br />
emergenza<br />
EN 50102<br />
Degrees of protection provided by enclosures for electrical<br />
equipment against external mechanical impacts (IK code)<br />
This standard describe a <strong>system</strong> for classifying the degrees<br />
of protection provided by enclosures for electrical equipment<br />
against external mechanical impacts. The adoption of this<br />
classification <strong>system</strong>, wherever possible, should promote uniformity<br />
in methods of describing the protection provided by<br />
the enclosure and in tests that prove different degrees of<br />
protection (IK code).<br />
IK 00 IK 01 IK 02 IK 03 IK 04 IK 05 IK 06 IK 07 IK 08 IK 09 IK 10<br />
/ 0,15 0,2 0,35 0,5 0,7 1 2 5 10 20<br />
CEI EN 11170-3:2005<br />
Railway and tramway vehicles.<br />
Guidelines for fire protection of railway, tramway and guided<br />
path vehicles. Evaluation of fire behaviour of materials. Limits<br />
of acceptance.<br />
OTHER REFERENCES<br />
Standards pertaining to the behaviour of cables with intrinsic<br />
flame resistance are utilized as a reference for performing<br />
tests verifying the functional integrity of junction boxes for<br />
use in tunnels, as provided for in the ANAS design guidelines<br />
for road tunnel safety, “Linee Guida per la progettazione della<br />
sicurezza nelle gallerie stradali”.<br />
NF C 32 – 070<br />
Insulated <strong>conduit</strong>s and cables for installations.<br />
Tests for the performance level results under risk of fire.<br />
CEI EN 50362<br />
Fire-resistance test method for power and control cables of<br />
large size (external diameter greater than 20 mm) and unprotected<br />
for use in emergency circuits.