Hantarex TV Manuale LCD 32-40 WMC - tecno elettrica ferrari

EN
INSTALLATION
This display was designed to be fixed to the wall by means of special brackets or placed on a table
(optional).
Various types of supports are therefore available according to the specific requirements:
♦
♦
♦
Wall mount (fixed)
Placed on a table with a base
Placed on a table with a feet
The assembly specifications and instructions for the various types of assemblies are provided with the
supports themselves. Two persons are required to transport and install the device.
POWER ON
1. Connect terrestrial antenna cable.
2. Connect phone line to modem port.
3. Connect AC cable.
4. Switch on TV, a menu for Country choice will appear.
5. Select the correct Country with the / keys and press OK to confirm.
6. Analog channel-search will appear.
7. Select Start and press OK. The TV will run a search and memorize all available stations
automatically. This operation will take a couple of minutes.
8. Once the analog channel search is finished, you should set the OSD language.
9. The source will switch to digital TV, to automatically search for digital channels. Press OK.
10. Once the digital channel search is finished, memorize the data by pressing OK.
11. To modify the channels’ positions refer to sections 6.7 and 7.4.
WARNING:
We recommend you install the device using only its own accessories and scrupulously following the
instructions given in the specific chapters.
A precarious installation, carried out without using the standard accessories, may result in the device
being dropped, with consequent serious damage to it, and the risk of fire and injury to persons.
INSTALLATION
__________________________________________________________________________________________
LCD 32 – 40 TV
3