FRENI A PINZA CALIPERS BRAKES Positivi & Manuale

1.0 INSTALLATION1.1 Assemble the brake securely on to machine rigid frame or an adeguaterigid base designed to withstand the braking force:MPA brake F = 556 N; MPA/05 brake F = 1516 N; MPA/1 brake F = 3888 N;MPA/MAN brake F = 2880.1.2 The brake should be horizontally mounted to avoid the piston pressingthe brake arms. The following drawing shows the correct position.For further information regarding mounting positions please consult ourtechnical support departement.PICTURE 1:1.3. Connect the air hose to the piston by means of a 1/8"gas threadconnector for MPA brake, and 1/4"gas thread connector for MPA/05 andMPA/1 brakes, ensuring the hose is long enough to allow the brakepiston to move.1.4 The control air pressure should not exceed 6 bar. To ensure the brakefunctions correctly. The air supply should be free from oil or water.Therefore a 25 micron filter should be used, fitted with automaticcondensation discharger.1.5 Fasten brake on the machine by means of one M10, class 8.8 bolts, witha torque of 45 Nm.14