FRENI A PINZA CALIPERS BRAKES Positivi & Manuale

2.0 MAINTENANCE AND CAREALL MAINTENANCE OPERATIONS MUST BE PERFORMED ONLYWHEN THE MACHINE IS STOPPED.2.2 LINING PADS REPLACEMENT2.2.1 Take off the snap-ring C62145 mounted on the pin C62140.2.2.2 Remove the pin C62140.2.2.3 Replace the worn lining with a new one and reassemble the pin C62140and the snap ring C62145.NOTE: The friction pads used in this product are asbestos free andnon-toxic/harmful materials, and they have to be displacedaccording to your local regulation.2.2 FRICTION SURFACE CLEANINGRemove lining pads as already explained at the point 2.1.2.2.1 Use a non-polluting cleansing product to remove oil and grease tracesfrom the disc surface.NOTE: To avoid skin allergies use of gloves or protective creams.Remember to carefully wash your hands before handle anyfood or beverage.2.2.2 In case of shallow contamination of linings by any lubricant agent, thesurface may be cleaned wrapping it with an medium abrasive emerysheet. In case of deep contamination the full replacement of linings issuggested.NOTE: According to the European health and environment regulationall COREMO OCMEA products are asbestos free, and onlynon-toxic materials are used. Anyway the inhalation ofproduced exhausted dust should be absolutely avoided.2.3 GASKET AND DIAPHRAGM REPLACEMENT2.3.1 Off the air supply and disconnect the tubing.MPA BRAKE2.3.2 Remove the brake to the machine.16