XJOY 7 - Suex

10416UK18 TroubleshootingPROBLEMThe ADV does not work. The propellerdoes not turn when the trigger ispulled.Although the batteries are charged andconnectors are inserted, the ADV doesnot work.ADV autonomy has drasticallydiminished.When the main switch is turned off, theADV continues to run, there is no wayto turn it off.The engine is noisy.CAUSE - SOLUTIONOpen the ADV and make sure the batteries arecharged and that the connectors are insertedand not damaged and retry.The control system could be damaged. Itshould be checked.*The electric engine could be out of order andneeds replacement.*The batteries could be damaged and needreplacement.Replace the batteries.The battery charge is broken or does not workcorrectly and needs to be replaced.The control system is damaged. It should bereplaced.*The ADV requires overhaul.*The propeller was damaged and requiresThe ADV vibrates when the propeller replacement.turns.The transmission system is damaged. Itshould be overhauled.*Replace all seal gaskets and carefully checkThe ADV slowly floods.that internal tube housings are not scratched.See spare parts chapter 18*operation to be performed by the service centre.19 Maintenance19.1 Routine maintenanceOR seal maintenanceOpen the ADV and delicately remove the seal O-ring. Accurately clean the housing (onlyand exclusively with a clean brush or soft cloth) do not use any type of solvent or alcohol.Replace the gasket lubricated with VASELINE OIL in its housing (do not use any othertype of oil!). Sprays normally used for underwater equipment are recommended.Seal ORTO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM WWW.SUEX.ITPag. 20