Sony PCG-X18 - PCG-X18 Manuale software Inglese

Customizing Your Notebook Computer
n
N
36
Selecting the Display mode
About the Software on your Notebook Computer
Important
It is not possible to display screens
simultaneously on both an
external computer display
connected to the Monitor
connector and a TV connected to
the VIDEO or S VIDEO connector.
Depending on the type of
computer projector being used, it
may not be possible to display
screens simultaneously on the
internal LCD and an external
projector.
Screens cannot be displayed on a
TV connected to the VIDEO or S
VIDEO connector while using true
color (24 bit).
Setting
LCD panel
CRT/Projector
TV
Equipment displayed
The internal LCD panel.
An external computer display or an RGB projector
connected to the Monitor connector.
A video monitor or television connected to the
VIDEO or S VIDEO connector.
To set the width of the desktop and the vertical frequency of the display, check
IndependentDisplay/TiminginMonitorasshowninstep2.Youcanthenchangethe
settings by moving the refresh rate slider and the resolution slider.
When the external display type is set to TV:
The internal LCD display cannot be turned off. The content of both the LCD and
theTVdisplayswillbethesame.
The resolution can be set with the resolution slider to either 640×480 or 800×600.
7 Click OK
The Screen Properties reappear, and the selected display is enabled.
You can switch between displays by moving the Jog Dial while pressing the Fn key.
CRT Display
If you selected CRT/Projector in step 6 of "Selecting a Display", you can set the
resolution and so forth as appropriate for the type of external computer display or
projector.