Brother TD-2130N - Guida ai comandi Raster
Brother TD-2130N - Guida ai comandi Raster
Brother TD-2130N - Guida ai comandi Raster
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Raster</strong>Line 4<br />
Zero <strong>Raster</strong> 1<br />
Zero <strong>Raster</strong> 1<br />
<strong>Raster</strong>Line 3<br />
<strong>Raster</strong>Line 2<br />
<strong>Raster</strong>Line 1<br />
<strong>Raster</strong> Command Reference<br />
2.3.5 <strong>Raster</strong> line<br />
As shown below, the parts with data to be printed are converted with “raster graphics transfer”, and the<br />
parts with no data are converted with “zero raster graphics”. On the actual tape, margins (feed) are<br />
added specified with “various mode settings” at the beginning and the end.<br />
Feeding direction<br />
Expansion direction<br />
Print area<br />
<strong>Raster</strong>ized<br />
Feeding direction<br />
Print area<br />
Print head<br />
The following shows the relationship between the raster graphics parameters and the pixels.<br />
MSB LSB<br />
1 st B<br />
MSB LSB MSB LSB MSB LSB<br />
2 nd B 3 rd B 4 th B ...<br />
- 17 -<br />
2. Print Data
Change language