trinties porų dilimo procesai - Kauno technologijos universitetas

CITUOJAMI MOKSLO DARBAI
A1. Витязь П.А. Твердосмазочные покрытия в машиностроении. Монография.
Минск: Белорусская наука, 2007. 170 с.
A2. Джост П., Шофилд Дж. Экономия энергии с помощью триботехники.
Технико-экономическое исследование / Трение и износ. 1982. Т.3. № 2.
С.356–366.
A3. Czichos H., Habig K.H. Tribologie – Handbuch. Reibung und Verschleiß.
Braunsdweig, Wiesbaden, 1992. S. 560.
A4. Werkstoffe in der Tribotechnik: Reibung, Schmierung und
Verschleißbeständigkeit von Werkstoffen und Bauteilen / Oltwig Pigors. Leipzig:
Dt. Verl. Für Grunstoffindustrie, 1993. 395 p.
A5. ASM Handbook. V. 5. Surface Engineering. C.M. Cotell, J.A. Spraque, F.A.
Smidt. ASM International, 1994. 784 p.
A6. Хрущов М.М., Бабичев М.А. Абразивное изнашивание. Москва: Наука.
1970. 251 c.
A7. Kavaliauskienė L., Ambroza P. Influence of Carbon and Boron on the Properties
of Deposited Layer. Mechanika. 2004. 4(48). P.59–63.
A8. Serapinas V. Tribologiniai procesai kinematinėse porose. Kaunas: Technologija,
1999. 362 p.
A9. Padgurskas J., Rukuiza R., Amulevicius A., et. al. Influence of fluor-oligomers
on the structural and tribological properties of steel surface at the rolling friction.
Industrial Lubrication and Tribology. 2008. 60 (5). P. 222–227.
A10. Vekteris V., Mokšin V., Bučinskas V. Influence of liquid crystals to friction
characteristics of mineral lubricants // Proceedings of the 11 th World Congress
in Mechanism and Machine Science. April 1–4. 2004. Tianjin, China.
Vol. 5. Tianjin: China Machine Press, 2004. P. 2320–2323.
A11. Chen H., Xu C., Zhou Q., Hutchings I.M., Shipway P.H., Liu J. Micro-scale
abrasive wear behaviour of HVOF sprayed and laser-remelted conventional
and nanostructured WC–Co coatings. Wear, 2005. V. 258. 1–4, P. 333–338.
A12. Tribology of mechanical systems: a guide to present and future technologies /
by Jože Vižintin ... [et al.]. New York: ASME Press, 2004. 336 p.
A13. Гаркунов Д. Н. Триботехника (износ и безызносность). Москва:
Издательство МСХА, 2001. 616 с.
A14. Hernández Battez A., González R., Viesca J.L. et. al. CuO, ZrO 2 and ZnO
nanoparticles as antiwear additive in oil lubricants.
Wear. 2008. V. 265. 3–4.
422–428.
A15. Tarasov S., Kolubaev A., Belyaev S., Lerner M., Tepper F. Study of friction reduction
by nanocopper additives to motor oil. Wear. 2002. V. 252. 1–2. 63–69.
A16. Lubricants and Lubrication / Edited by T. Mang and Wilfried Dresel. Second,
Completely Revised and Extended Edition. Weinheim: Wiley-VCH Verlag
GmbH&Co. KGaA. 2007. 850 p.
A17. Schmierstoffe im Betrieb / U.J. Möller; Jamil Nassar. 2. Aufl. Berlin: Springer,
2002. 873 S.
Vytenis Jankauskas
31