Handleiding Floormaster - Parket- en Laminaatsnijder
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7051642_<strong>Floormaster</strong>:7051642 31.08.2009 8:20 Uhr Seite 7<br />
Safety Notes<br />
GB<br />
The <strong>Floormaster</strong> cuts laminate and vinyl/linoleum flooring up to 12 mm thickness. It is designed for unlimited<br />
rip cuts, unlimited diagonal cuts and notch-cuts. Please familiarize yourself with the proper usage<br />
of the device by reading and following each chapter of this manual, in the order pres<strong>en</strong>ted. Keep these<br />
operating instructions for further refer<strong>en</strong>ce. This operating instruction contains important details for<br />
handling the device. Please pass it on along with the unit if it is handed over to a third party!<br />
Please read the safety instructions! These instructions will make it easier for you to handle the device<br />
and help prev<strong>en</strong>t misunderstandings and possible damage or injury.<br />
!<br />
Please<br />
note the included G<strong>en</strong>eral Safety Notes and the following safety notes to avoid malfunc -<br />
tions, damage or physical injury:<br />
• Use the unit with extreme caution.<br />
• Use the <strong>Floormaster</strong> only according to this manual.<br />
• Do not leave the <strong>Floormaster</strong> unatt<strong>en</strong>ded and keep it out of reach of childr<strong>en</strong>. This is not a toy.<br />
• The unit has exposed sharp blades. Do not remove finger guard (H). Removing finger guard could<br />
cause serious injury.<br />
• Although the <strong>Floormaster</strong> does not produce airborne dust, it is recomm<strong>en</strong>ded to wear<br />
a dust mask wh<strong>en</strong> operating this tool.<br />
• Remove handle completely from base, wh<strong>en</strong> not in use.<br />
• Always keep fingers and hands away from blade cutting area.<br />
• Periodically check all assembly to <strong>en</strong>sure that hardware remains tight.<br />
Using<br />
BEFORE FIRST USE<br />
Remove the <strong>Floormaster</strong> and the accessory out of the packaging and check for any damage in transit.<br />
Keep packaging materials out of reach of childr<strong>en</strong>. There is risk of suffocation!<br />
ASSEMBLY INSTRUCTION<br />
1. Place the base (|A) on a flat surface.<br />
2. Attach the ratchet handle (|C) to the blade shaft (|B), making sure the directional switch (|F) is facing<br />
away from the blade.<br />
3. Th<strong>en</strong> place the washer (|D) followed by the screw knob (|E) on the shaft to secure the handle.<br />
INSERTING/REPLACING THE SAW BLADES<br />
1. Remove the three screws (|G) from each blade. Use extreme caution. The sharp blades could cause<br />
serious injury!<br />
2. Remove the cover plates and insert / replace the saw blades.<br />
| 7