Extender - Danfoss.com
Extender - Danfoss.com
Extender - Danfoss.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9 3 1 Sub menu SERVICE -> INSTALLATION<br />
<strong>Extender</strong><br />
Used for settings that are set during installation<br />
Menu selection Meaning Factory setting<br />
SYSTEM<br />
Note! The menu selection<br />
in the SYSTEM menu<br />
varies depending on the<br />
selected values Tip: start<br />
in the top menu and<br />
work downwards<br />
Sub menu SERVICE -> INSTALLATION -> SYSTEM:<br />
Menu selection Menu selection Meaning<br />
HEATING SYSTEM<br />
POOL POOL is normally displayed<br />
Not displayed if BUFFER TANK = ON or SHUNT GROUP = On<br />
SHUNT GROUP Not displayed if BUFFER TANK = On<br />
BUFFER TANK<br />
BUFFER TANK Select ON or OFF<br />
SYSTEM SHUNT Displayed if BUFFER TANK = On<br />
ADDITION<br />
Select ON or OFF<br />
VK 2 SHUNT Displayed if BUFFERTTANK = On and expansion card<br />
and sensors for heating circuit 2 are connected<br />
Select ON or OFF<br />
For ATELLA/DHP-AX the sub-menu SERVICE -> INSTALLATION -> SYSTEM is displayed:<br />
Menu selection Menu selection Meaning<br />
HEATING SYSTEM D-SYSTEM / Normally displayed in a D-system<br />
Not displayed if BUFFER TANK = On<br />
VLD-SYSTEM / Normally displayed in a VLD-system<br />
Not displayed if BUFFER TANK = On<br />
POOL POOL is normally displayed<br />
SHUNT GROUP<br />
BUFFER TANK<br />
Not displayed if BUFFER TANK = ON or SHUNT GROUP = On<br />
Not displayed if BUFFER TANK = On<br />
BUFFER TANK Select ON or OFF<br />
NUMBER OF Displayed if T2, T3 are connected and Buffer tank = On<br />
CIRCUITS<br />
Select 1 or 2<br />
SYSTEM SHUNT Displayed if BUFFER TANK = On and NUMBER OF<br />
CIRCUITS = 2<br />
ADDITION<br />
Select ON or OFF<br />
VK 2 SHUNT Displayed if BUFFER TANK = On and NUMBER OF<br />
CIRCUITS = 2 and expansion card is connected<br />
Select ON or OFF<br />
Page 37
Change language