APPENDIX 2 - DANETV

HF
Cutmax WL SH 10
Cutmax WL SH 10 is an amber metal working oil based on a combination of polar and
chemically active substances.
Cutmax WL SH 10 is free from chlorine and zinc-containing additives and does not
contain any PCBs or other known dangerous additives.
❑
❑
❑
❑
❑
❑
High performance oil
Good cooling properties
High flushing properties
Clean surface finish
High tool life
High separation between tool and workpiece
Application:
Cutmax WL SH 10 was especially developed for grinding. It can be used for grinding of
hardened as well as soft surfaces. Excellent results are achieved with both structure
conditions and the use of CBN as grinding medium.
Cutmax WL SH 10 gives extented service life. It is also excellent for honing, fine boring
and finishing.
A specially selected additive combination ensures excellent cooling and surface rinsing.
Abrasive wheel-life, between redressing es extented, ensuring dimentional stability and
high surface quality. These factors have obvious quality assurance benefits.
Appearance
amber
Density at 20°C 0,85 [g/cm³] ± 0,02 DIN 51757
Viscosity at 40 °C 10 [mm²/s] ± 1 DIN 51562
Viscosity at 20 °C 18 [mm²/s] ± 2 DIN 51562
Flashpoint > 155 [°C] DIN ISO 2592
Pourpoint - 20 [°C] ISO 3016
Copper Corrosion 1 a DIN 51759
WGK 1
All data given in this Product data Sheet are typical of this material. It does not however constitute a specification. We reserve the right to modify
products without prior notice. All products, services and information supplied are provided upon the terms of our standard Conditions of Sale from
time to time in force.
20.11.98/TI/70887e Cutmax WL SH 10