Manual Port - ABUSAR

======= Debug Command Listing =======AT just answer OKATHE print helpATBAx change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2kATENx,(y) set BootExtension Debug Flag (y=password)ATENx,(y) set BootExtension Debug Flag (y=password)ATSE show the seed of password generatorATTI(h,m,s) change system time to hour:min:sec or show current timeATDA(w,y,m,d) change system date to week year/month/day or show current dateATDS dump RAS stackATDT dump Boot Module Common AreaATDUx,y dump memory contents from address x for length yATRBx display the 8-bit value of address xATRWx display the 16-bit value of address xATRLx display the 32-bit value of address xATGO(x) run program at addr x or boot ZyNOSATGR boot ZyNOSATGT run Hardware Test ProgramATRTw,x,y(,z) RAM test level w, from address x to y (z iterations)ATSH dump manufacturer related data in ROMATDOx,y download from address x for length y to PC via XMODEMATUR upload RAS code to flash ROMATLC upload RAS configuration fileFigura 10-23 Comandos do Módulo BootPAG 10 23