WNIP May June 19.3 Digital
Wnip may june 19 3 digital
Wnip may june 19 3 digital
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
24<br />
Extended specs on multi-function installation tester series<br />
Announcing<br />
extended<br />
specifications and new<br />
advanced features on the<br />
tried-and-tested 1650 Series<br />
multifunction installation<br />
testers that verify domestic,<br />
commercial and industrial<br />
electrical installations, and ensure<br />
fixed wiring is safe and correctly<br />
installed to meet local and<br />
international IEC 60364, HD 384<br />
standards.<br />
The 1650 Series allows users to<br />
measure loop impedance without<br />
tripping RCD’s, eliminating the<br />
need to bypass them. Slim reach<br />
probes keep eyes on the panel<br />
whilst the user probes hard to<br />
reach areas. With a large display<br />
and a wide viewing angle, padded<br />
neck strap, and a compact,<br />
ergonomic design, these testers<br />
are comfortable enough to use for<br />
all-day testing.<br />
1650 Series Extended<br />
Specifications are:<br />
• Fast high current loop test (high<br />
current mode)<br />
• Advanced loop testing prevents<br />
RCDs from tripping<br />
• Variable RCD current mode for<br />
customised settings<br />
• Zero adapter for easy test lead<br />
compensation The PASS/FAIL<br />
indicator takes the guesswork<br />
out of RCD testing<br />
• Insulation test voltages<br />
(1652C: 250 V, 500 V, 1000 V),<br />
(1653B/1654B: 50 V, 100 V, 250<br />
V, 500 V, 1000 V) for a variety of<br />
applications<br />
• Select voltage measurement<br />
between L-N, L-PE, and N-PE<br />
• Dual display gives simultaneous<br />
readout of mains voltage and<br />
frequency<br />
• Auto discharge allows fast<br />
and safe discharge of electrical<br />
energy in capacitive circuits<br />
• Added safety through live<br />
circuit detection, to check and<br />
inhibit test if circuit under test<br />
is live<br />
• Wiring connection check indication<br />
and live circuit detection for<br />
added safety<br />
• Time saving auto-null feature<br />
<strong>19.3</strong><br />
<strong>Digital</strong> valve controller software enhanced to include Profibus<br />
protocol<br />
The addition of DTM software<br />
extends the Fieldvue<br />
instrument’s monitoring and<br />
diagnostic capabilities and<br />
enables the manufacturer to<br />
support an installed base of 32<br />
million Profibus devices<br />
Fisher Fieldvue DVC6200<br />
series digital valve controllers are<br />
now available for use by process<br />
industries with PLCs and Profibus<br />
communications as the dominant<br />
protocol.<br />
The Fieldvue DVC6200p<br />
digital valve controller with Device<br />
Type Manager (DTM) software<br />
supports control valve startup,<br />
commissioning, and diagnostic<br />
activities. It has also been tested<br />
and integrated for use with<br />
multiple Field Device Tool (FDT)<br />
host systems.<br />
Industries including food and<br />
beverage, water and wastewater,<br />
pharmaceutical, pulp and paper,<br />
and metals and mining will find<br />
value in the Fieldvue DVC6200p<br />
DTM instrument’s intuitive<br />
interface.<br />
Available in a variety of<br />
materials including stainless steel,<br />
the device comes with mounting<br />
kits to accommodate different<br />
actuators.<br />
Mounting kits can be re-used<br />
in upgrades to existing Fieldvue<br />
instruments.<br />
For control valves located<br />
in critical or hazardous areas,<br />
the Fieldvue DVC6200p may be<br />
remotely mounted to enhance<br />
its performance in harsh process<br />
conditions such as high-heat or<br />
vibration.<br />
Utilizing Human-Centered<br />
Design concepts, the Fieldvue<br />
DVC6200p DTM has several<br />
features that simplify control valve<br />
set-up and monitoring. Its intuitive<br />
setup, auto-calibration, and<br />
simple tuning features save time<br />
during commissioning.<br />
With the failsafe option, users<br />
can set the instrument to hold its<br />
last value or position to actuator<br />
fail, based on control valve process<br />
needs.<br />
By incorporating control<br />
logic, module assignment,<br />
and linkage-less, non-contact<br />
sensor technology, the Fieldvue<br />
DVC6200p digital valve controllers<br />
and DTM are easy to install, provide<br />
“plug and play” capabilities, and<br />
perform reliably – even in harsh<br />
environments.<br />
michael.eksteen@<br />
emerson.com<br />
subtracts lead resistance from<br />
measurements, and stores it in<br />
memory even after powering<br />
down<br />
• High resolution measurements<br />
down to 0.01 ohm for a high level<br />
of accuracy<br />
• User selectable safety voltage<br />
level of 50 V or 25 V for varied<br />
environments<br />
• Perform ground tests with<br />
auxiliary earth spikes eliminating<br />
the need for multiple instruments<br />
(1653B/1654B only)<br />
• Download up to 444 (1653B) or<br />
1500 (1654B) stored results with<br />
IR port and adapter for professional<br />
reporting<br />
• Detachable leads for easy<br />
replacement EN-61557 and VDE<br />
0413 compliant.<br />
sales@comtest.co.za<br />
New photoelectric sensor: Bridging the gap<br />
Now products can be counted<br />
and detected on the conveyor<br />
in a way that was not possible<br />
before. Without gaps. Without<br />
delays. The DeltaPac accurately<br />
detects and differentiates<br />
between successive packaging<br />
items on the fly. This ensures faster,<br />
smarter and more economical<br />
production. In other words:<br />
The DeltaPac is a patented<br />
technological world first.<br />
What makes this possible is the<br />
patented Delta-S-Technology®.<br />
The functional principle<br />
of DeltaPac utilizes the edge<br />
contours of objects. In the gapless<br />
transition from one object to<br />
the next, the edges change the<br />
reflectance behaviour of the<br />
package surface. This change in<br />
direction of reflectance is used for<br />
outputting switching signals.<br />
Object contours with radii of<br />
up to 20mm are thus detected<br />
reliably. The high-precision<br />
evaluation characteristic of<br />
DeltaPac ensures detection of<br />
even the smallest changes in<br />
angle.<br />
duncan.venter@<br />
sickautomation.co.za