Tellabs 7305 Ethernet Demarcation Device

DATA SHEET
Tellabs ® 7305 Ethernet Demarcation Device
Compact 1 Gigabit Carrier-Class Ethernet Transport and Service Delivery.
Overview
The Tellabs ® 7305 Ethernet Demarcation Device (EDD) is a flexible
and cost-effective Network Interface Device (NID) that can operate as
a Transport NID or Service NID to provide service demarcation for infranchise
and out-of-franchise applications. It includes the standardsbased
performance and Operations, Administration and Maintenance
(OAM) features that network operators need to successfully transport
and deliver Carrier Ethernet services.
The Tellabs 7305 EDD is part of the Tellabs ® 7300 Metro Ethernet
Switching Series and an integral component of Tellabs ® Carrier
Ethernet Solutions. By combining the Tellabs 7305 EDD with the
Tellabs ® 7100 Optical Transport System (OTS) and the Tellabs ®
8600/8800 Smart Router Series, operators can design, scale and
deliver cost-effective and reliable networks that meet users’ varying
service needs. The 7305EDD can be managed by the Tellabs 8000
INM as part of a larger Tellabs solution. This provides end-to-end
provisioning and support.
Features
n Functions as a Service NID or Transport NID
n Supports 802.3ah Link OAM and 802.1ag Service OAM for
end-to-end fault detection and performance monitoring
n VLAN service tagging (802.1Q)
n E-Line and E-LAN and E-Access service multiplexing via 802.1ad
VLAN stacking (Q-in-Q)
n Granular rate limiting using Committed Information Rate (CIR)
and Committed Burst Size (CBS)
n Class of Service based on 802.1p Quality of Service (QoS)
prioritization
n Small Form Factor Pluggable (SFP) Gigabit and Fast Ethernet
fiber transceivers for standard and Coarse Wavelength Division
Multiplexing (CWDM) applications
n Customer-facing service port available in copper RJ-45 or
SFP fiber interfaces
n Temperature-hardened
n Certified MEF 9, MEF 14 and MEF 21 Compliant
n MEF 30 and MEF 31 Compliant
n G.8031 Ethernet Linear Protection Switching
n G.8032 Ethernet Ring Protection Switching*
n Zero touch provisioning
n Service activation testing with RFC 2544
n Carrier Ethernet 2.0 Certified by the MEF 1/29/2013 (E-LAN,
E-Line, E-Access and E-Tree)*
n Flexible management options with command-line interface,
Tellabs 7191 Craft Station, and Tellabs 8000 Integrated Network
Manager (INM)
See tellabs.com for more information about Tellabs Solutions
Tellabs ® 7305 Ethernet Demarcation Device
When functioning as a Transport NID, the Tellabs 7305 EDD acts
as a remotely managed media converter with carrier-grade OAM
capabilities. The Tellabs 7305 EDD is service-transparent and
passes data without performing traffic management. Traffic
management functions are performed by carrier equipment at the
edge of the service provider network.
As a Service NID, the Tellabs 7305 EDD provides service mapping
and traffic policing and shaping functions. The Tellabs 7305 EDD
supports MEF-certified User-to-Network Interface (UNI) functions,
including Class of Service (CoS) prioritization, granular rate-limiting
and 802.1ad Provider Bridge VLAN stacking (Q-in-Q) for service
multiplexing of multiple E-LINE and E-LAN services.
In both operational modes, the Tellabs 7305 EDD conforms to
the latest carrier-class Ethernet OAM standards — 802.3ah Link
OAM proactively monitors the network provider’s fiber access and
customer-facing links for physical failures and deterioration of data
quality, and 802.1ag Service OAM provides end-to-end Connectivity
Fault Management (CFM) and performance monitoring. These OAM
features provide efficient detection and rapid isolation of potential
service problems to provide Service Level Agreement (SLA)
assurance while reducing Operational Expenditures (OpEx).
* Supported by upcoming software release already under development.

DATA SHEET
Tellabs ® 7305 Ethernet Demarcation Device
Compact 1 Gigabit Carrier-Class Ethernet Transport and Service Delivery.
Metro Ethernet
Network
100Mbps or 1000Mpbs
Fiber Access Links
7305
CPE
Figure 1: Tellabs 7305 EDD in geo-diverse and multi-tenant applications
7305
CPE
100 Mbps/1000 Mbps Fiber
UTP Copper
Tellabs 7305 EDD fiber ports can support Gigabit (1000 Base-X)
or Fast Ethernet (100 Base-FX) fiber access links by utilizing an
SFP transceiver with the desired data rate. The triple-speed copper
interface operates at 10/100/1000 Mbps rates. The Tellabs 7305
EDD may be used in two-port or three-port configurations. In the
three-port configuration, the Tellabs 7305 EDD can be used in
geographically diverse uplink redundancy applications and multitenant
applications (Figure 1).
Ethernet
n Three-port configuration supports redundant access link or multicustomer
applications
n Interfaces
– 2 x 100/1000 Mbps optical (SFP)
– 1 x 10/100/1000 Mbps electrical (RJ45)
– All 3 ports are configurable as NNI or UNI
n SFP transceivers for standard or CWDM wavelength
n SFP transceivers models support maximum fiber distances up to
140km
n G.8031 Ethernet Linear Protection Switching
n G.8032 Ethernet Ring Protection Switching*
n Media conversion for connectivity to customer equipment
n Supports 10,240 byte jumbo frames
n Supports Rapid Spanning Tree Protocol (RSTP)
Fault Management
n Supports a variety of link fault detection and fault propagation
features
– Link fault notifications
– Link/VLAN RDI (T-RDI and 802.1ag RDI)
– Link fault propagation over port level service via automatic laser
shut off
n 802.3ah Link OAM
– Link loopback
– Unidirectional link fault detection
– Threshold-based monitoring and notification
– Dying gasp
n 802.1ag end-to-end Service OAM and CFM
– Supports eight levels of Maintenance domains and Maintenace
End Points (MEP)
– 64 Maintenance Associations
– Connectivity Check Messages (CCM)
– Remote Defect Indication (RDI)
– Link Trace
– Diagnostic loopback (Layer 2 ping)
n Y.1731 Alarm Indication Signal (AIS)
n Sub 50ms Failover Protection Switching
Traffic Management
n Service mapping to enable multiple services per UNI
– 802.1Q VLAN tagging
– 802.1ad Provider Bridge VLAN stacking (Q-in-Q)
– Service Multiplexing up to 64 Ethernet Virtual Connections
(EVCs) for E-line, E-LAN, and E-Access Services
– Layer 2 control protocol policy (L2CP) management
n Traffic policing and shaping
– Granular rate limiting
– CIR & CBS
n CoS based on 802.1p QoS prioritization
Node Management & Security
n Flexible management tools:
– Command Line Interface (CLI)
– Craft station GIO (Tellabs ® 7191 Craft Interface)
– Tellabs ® 8000 Integrated Network Manager
n Secure Shell (SSH)
See tellabs.com for more information about Tellabs Solutions
n Remote management
– In-band VLAN
– SNMPv1/2c/3
– Telnet
– IP-less 802.3ah OAM extensions
n Local management via serial console port
n Public (non-proprietary) 802.1ag CFM SNMP MIBs
– Easy third-party SNMP management software integration
* Supported by upcoming software release already under development.

3 TELLABS 7305 ETHERNET DEMARCATION DEVICE
Specifications
Performance Testing & Monitoring
n Y.1731 Performance Monitoring
– Frame delay
– Frame delay variation (jitter)
– Frame loss
– Service availability
n RFC 2544 Network Performance tests
n Y.1564 Service activation tests*
Synchronization
n 1588v2 Precision Time Protocol*
n Synchronization Ethernet*
Physical and Environmental
Dimensions
n 25mm x 97mm x 122mm / 1.0" x 3.8" x 4.8" (H x W X D)
Weight
n 1.5 lbs. (0.68 kg), including AC power adapter
Temperature & Humidity
n Available for Normal and Extended operating temperature range
environments
– 0°C to 50°C (7305A/C)
– -40°C to 75°C (7305B/D)
Storage Temperature
n -40°C to 80°C
Humidity
n 5% to 95% (non-condensing)
Power Specifications
n 8-60V DC (7305C/D), 8-32V DC (7305A/B)
n 100-240V AC (50 - 60Hz) with adapter (included)
Regulatory/Compliance
n FCC Part 15, Class A
n UL 60950 1st Edition
n IEC 60950
n CSA C22.2 60950
n NEBS Level 3 Compliant
n RoHS
n WEEE
n MEF 9, 14, 21 Certified Compliant
n Carrier Ethernet 2.0 Certified by the MEF 1/29/2013 (E-LAN, E-Line,
E-Access and E-Tree)*
n MEF 30, 31 Compliant
North America
Tellabs
1415 West Diehl Road
Naperville, IL 60563
U.S.A.
+1 630 798 8800
Fax: +1 630 798 2000
Asia Pacific
Tellabs
3 Anson Road
#14–01 Springleaf Tower
Singapore 079909
Republic of Singapore
+65 6215 6411
Fax: +65 6215 6422
Feature 7305A 7305B 7305C 7305D
TELNET, SNMP v1, v2c, v3 x x x x
SSH -- -- x x
Zero-Touch Provisioning x x x x
ITU-T Y.1564 Service Testing -- -- * *
RFC 2544 Throughput Testing -- -- x x
IEEE 802.3ah x x x x
IEEE 802.1ag x x x x
ITU-T Y.1731 x x x x
EP-Line, EP-LAN, EP-Access x x x x
EVP-Line, EVP-LAN, EVP-Access x x x x
Rapid Spanning Tree Protocol x x x x
G.8031 Protection -- -- x x
G.8032 Ring Protection -- -- * *
Rate Limiting x x x x
MIB Statistics (RMON) x x x x
L2CP Policy Manager x x x x
Sync Ethernet -- -- * *
Dying Gasp x x x x
Temperature Hardened -- x -- x
L2PT (STP, VTP, CDP protocols) -- -- x x
1588v2 PTP -- -- * *
* Supported by upcoming software release already under development.
Europe, Middle East & Africa
Tellabs
Suites 1 & 2
St Johns Court
Easton Street
High Wycombe, Bucks
HP11 1JX
United Kingdom
+44 871 574 7000
Fax: +44 871 574 7151
Latin America & Caribbean
Tellabs
RUA James Joule NO. 92
EDIFÍCIO PLAZA I
São Paulo – SP
04576-080
Brasil
+55 11 3572 6200
Fax: +55 11 3572 6225
The following trademarks and service marks are owned by Tellabs Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS®, TELLABS and T symbol®, and T symbol®. Statements herein may contain projections or other
forward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are not to be construed as
instructions, product specifications, guarantees or warranties. Actual results may differ materially.
© 2013 Tellabs. All rights reserved. 74.2061E Rev G 1/13