TravelPilot Lucca 3.5 firmware update - Blaupunkt

• Unpack the zip-file into a new directory and open the file. The following files will appear:
• Extract the files onto your work station. Please do not extract the files straight to the SD card.
• Copy all files onto the formatted SD-Card, until the complete file directory shown above
appears.
• Once the copy process is completed, please deactivate the SD-Card reader. Use the
Windows symbol in the task bar of your PC.
• The completed SD-Card containing the data can now be removed.
How to update the TravelPilot Lucca 3.5:
• Connect your TravelPilot to the 230 V power adapter or the 12 V cigarette lighter cable.
• Switch off your TravelPilot Lucca 3.5. For this please press and hold the On/Off-button for
more than 15 seconds.
• Insert the SD-Card in your TravelPilot Lucca 3.5.
• Now press and hold the right "VOL+" button and at the same time press “On/Off-button" until
the download progress appears. Both buttons can be released now.
• After a short time (about 2 minutes) "OK" is displayed.
• Please press "OK", then "Navigation" and "Settings" down right on the display.
• The message "Dataset not available" is displayed. Please press "OK" and choose a dataset.
• The desired map containing your position will appear (if a GPS signal is receivable).
• Remove the SD-Card.
• Press "OK"
• By pressing the blue button you get to the main menu. Enter "Settings" and choose your
language.
• Your device is now updated.
Registered Office: Hildesheim, Registration Court: Amtsgericht Hildesheim HRB 120
Chairman of the Supervisory Board: Volkmar Denner; Managing Directors: Uwe Thomas,
Dirk Hoheisel, Michael Klemm, Otto Mayer
Blaupunkt GmbH - A Bosch Group Company
Page 2 of 3