Bedienungsanleitungen
Bedienungsanleitungen
Bedienungsanleitungen
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Instruction Manual K 35/4 page 11<br />
________________________________________________________________________________________________________________<br />
Instruction Manual<br />
for the hand-hydraulic crimping tool Type K 35/4, Serial-No. ............................<br />
1. Introduction<br />
Attention<br />
Before starting to use the tool please read the instruction manual carefully.<br />
Use this tool exclusively for its determined use.<br />
2. Warranty<br />
If correct operation is guaranteed our warranty is 12 months from the time of delivery.<br />
3. Remarks in respect of the determined use<br />
The K 35/4 is a mechanical crimping tool for interchangeable dies.<br />
3.1. Operation of the unit<br />
First you have to select the right dies (Pos.-No. 6) for the intended application.<br />
The crimping head has to be opened by unhooking the latch (Pos.-No. 5). Afterwards dies<br />
will be inserted consecutively into the crimping head.<br />
Instruction manual K 35/4 page 11<br />
________________________________________________________________________________________________________________<br />
Instruction Manual<br />
for the hand-hydraulic crimping tool Type K 35/4, Serial-No. ............................<br />
1. Introduction<br />
Attention<br />
Before starting to use the tool please read the instruction manual carefully.<br />
Use this tool exclusively for its determined use.<br />
2. Warranty<br />
If correct operation is guaranteed our warranty is 12 months from the time of delivery.<br />
3. Remarks in respect of the determined use<br />
The K 35/4 is a mechanical crimping tool for interchangeable dies.<br />
3.1. Operation of the unit<br />
First you have to select the right dies (Pos.-No. 6) for the intended application.<br />
The crimping head has to be opened by unhooking the latch (Pos.-No. 5). Afterwards dies<br />
will be inserted consecutively into the crimping head.