(Additiv) KEMPER Dosing Unit for Pre-coating (Additive)
(Additiv) KEMPER Dosing Unit for Pre-coating (Additive)
(Additiv) KEMPER Dosing Unit for Pre-coating (Additive)
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
C. Charging of the <strong>Dosing</strong> <strong>Unit</strong><br />
• Loosen the lower toggle tip fastener at the funnel tube<br />
and take the complete funnel tube off the dosing unit.<br />
• Open the new container with pre<strong>coating</strong> powder by taking off the toggle tip fastener.<br />
• Lock the slide valve of the funnel tube and put the funnel tube upside down onto the<br />
container with pre-<strong>coating</strong> powder.<br />
• Fasten the funnel tube with the toggle tip to the open container to prevent any<br />
escaping of the powder.<br />
• Put the complete funnel tube together with the container back onto the dosing unit<br />
and fasten it with the toggle tip fastener.<br />
• Open the slide valve and let all the powder fall into the dosing unit by thumping<br />
onto the funnel tube.<br />
• After this you can take off the container by opening the toggle tip fastener<br />
and lock the slide valve.<br />
• The dosing unit is ready <strong>for</strong> operation again.<br />
D. Safety instructions<br />
8