Download PDF - MENTOR GmbH & Co, Präzisions-Bauteile
Download PDF - MENTOR GmbH & Co, Präzisions-Bauteile
Download PDF - MENTOR GmbH & Co, Präzisions-Bauteile
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Fassungen für Ø5mm LED<br />
Kunststoff<br />
Spezifische Technische Daten<br />
Gehäusewerkstoff: PC UL94<br />
Die Fassungen mit Innen- oder Außenreflektor sind für LEDs Ø5mm ausgelegt und<br />
werden in Frontplatten von 0,6mm bis 3mm eingesetzt. Die LED wird von hinten<br />
im Gehäuse eingeschnappt.<br />
Art.-Nr. 673<br />
RTF.5010<br />
Art.-Nr. 674<br />
RTF.5020<br />
Fassung für Ø8mm LED<br />
Kunststoff<br />
Die Fassung mit Außenreflektor ist für LEDs Ø8mm ausgelegt und wird in Frontplatten<br />
von 0,6mm bis 3mm eingesetzt. Die LED wird von hinten im Gehäuse eingeschnappt.<br />
Art.-Nr. 675<br />
RTF.8080<br />
Fassung für Ø10mm LED<br />
Kunststoff<br />
Die Fassung mit Außenreflektor ist für LEDs Ø10mm ausgelegt und wird in Frontplatten<br />
von 0,6mm bis 3mm eingesetzt. Die LED wird von hinten im Gehäuse eingeschnappt.<br />
Art.-Nr. 676<br />
RTF.1090<br />
Holders for Ø5mm LED<br />
Plastic<br />
Specific Technical Data<br />
Housing Material: PC UL94<br />
The sockets with internal or external reflector are designed for LEDs of Ø5mm and<br />
are used in front panels with a thickness of 0.6 to 3mm. The LED snaps into the<br />
case from the rear side.<br />
Magerdruck keine Lagerware · Bestellmenge und Preise auf Anfrage · Articles in roman typefaces not in stock · Order quantities and prices on request<br />
Ø 9.5<br />
Ø 5<br />
Ø 9.5<br />
Ø 5<br />
Holder for Ø8mm LED<br />
Plastic<br />
2.5<br />
3<br />
12.5<br />
10<br />
15<br />
The socket with external reflector is designed for LEDs of Ø8mm and is used in<br />
front panels with a thickness of 0.6 to 3mm. The LED snaps into the case from<br />
the rear side.<br />
Ø 14<br />
Ø8<br />
13.5<br />
16.5<br />
Ø 8<br />
Ø 8<br />
Ø 12<br />
Holder for Ø10mm LED<br />
Plastic<br />
The socket with external reflector is designed for LEDs of Ø10mm and is used in<br />
front panels with a thickness of 0.6 to 3mm. The LED snaps into the case from<br />
the rear side.<br />
Ø16<br />
Ø10<br />
15<br />
18<br />
Ø 13.9<br />
45