Datenblatt - AVS Phoenix Mecano

RK ROSE
+
KRIEGER
The Easywork-Online-Configurator provides you the
easiest and fastest tool for selecting your future workstation
according to your requirements.
www.rk-konfigurator.eu
You are guided step by step through all options and so
you will obtain your fully customized assembly workstation,
just like it is required for your target setting.
Step 1
You choose your favourite workstation between four
basic variants. (See also pages 10, 11)
Zubehörausstattung auswählen
Selection of accessories
Step 2
Apart from the dimensions, you are also asked about
profile options, braces and ESD-accessories.
Step 3
Optional table tops, as well as arrangement of visual
screens. It is possible to deselect an element.
Step 4
Depending on the chosen desk width you can select a
gantry for installations. Heights and depths are optional.
Step 5
If you decided to use a gantry, you will be asked about
lamps, power supply, grab containers and ingenious
accessories.
Step 6
Optional drawer cabinets
Step 7
In the structured range of accessories you will be able
to choose further items.
Erstellung eines Angebots und 3D CAD-Daten zur
weiteren Verwendung
Creation of an offer and 3D CAD data for further
usage
Step 8
The offer is created using 3D-images and CAD data.
In this way, several variants can be tested and, with
3D-data, optimally be implemented in your planning
process.
7