Bestellnummern – Part numbers

Water resistant D-Sub Steckverbinder How to create a / Part Connectors NumberOrder example: 4 S T D 0 9 S A M 9 9 B 3 0 XProduct Line4 = Shell tin plated with plastic frame7 = Shell tin plated with metal frameContact arrangementSTD = D-Subminiature- standardHDD = D-Subminiature- High DensityNo. of pos. for STD09 = 09-pos.15 = 15-pos.25 = 25-pos.37 = 37-pos.50 = 50-pos.No. of pos. for HDD15 = 15-pos.26 = 26-pos.44 = 44-pos.62 = 62-pos.78 = 78 pos.Contact typeP = Plug connectorS = Female connectorPlating code for contactsA = Quality class 3 = 50 Mating cyclesB = Quality class 2 = 200 Mating cyclesC = Quality class 1 = 500 Mating cyclesTermination applies for signal contacts onlyM = Solder cupR = PC tail straightT = PC tail angled, .188U = PC tail angled, .276Z = PC tail angled, .463Y = PC tail angled, .220 (only for High Density „HDD“)Capacitance99 = without filter for STD and HDDMounting styleA1 = riveted through hole for cable mountB2 = threaded insert M3B3 = threaded insert 4-40 UNCB4 = threaded lock for front mounting M 3B5 = threaded lock for front mounting 4-40 UNCE1 = threaded rear spacer-Clip M3, PCB .063, StandardE2 = threaded rear spacer-Clip 4-40 UNC, PCB .063, StandardS1 = metal bracket, threaded insert M3S2 = metal bracket, threaded insert 4-40 UNCS3 = metal bracket, threaded insert M3 and ClipS4 = metal bracket, threaded insert 4-40 UNC and ClipR1 = metal bracket, threaded insert M3R2 = metal bracket, threaded insert 4-40 UNCR3 = metal bracket, threaded insert M3 and ClipR4 = metal bracket, threaded insert 4-40 UNC and Clip0X = standard®3|5