Zapper Manual - Beck Zapper

Instruction Manual V1.36. Controls1. Current_thumb_wheelAt this thumb wheel you can setthe current seamlessly. Highercurrent by turning in direction of„+“, lower current by turning towards„–“.1. Strom-Einstellrad 2. Piezo-Signalgeber(integriert)3. LED4. Out plug2. Piezo_signal_generatorOn turning on and off, as wellduring operation failures, theminiZAP ® produces an audiblesignal. Please find the overviewon the various sound signalsunder „9. Flashing and soundsignals“.des Batteriefachs3. Light emmitting diode (LED)TEXT FÜR ABSTANDS-EINHALTUNG FORMATWEISSEDuring normal operation the LED blinks every 2 seconds, except that the blinking wasswitched off (compare „7. Pushbutton functions“). In case of a failure the LED flashessynchroneously to the audible warning signal. Compare „9. Flashing and sound signals“.4. Output_plugThe electrodes cable is connected to this plug.5. ON / OFF pushbuttonWith this pushbutton the miniZAP ® is switched on and off. More information under „7.Pushbutton function“.6. Velcro_attachementOn ist lower side the miniZAP ® has a velcro field with which it can be easily attachedto the wrist band.7. Battery_case_coverCompare „13. Battery change“.8. Notch_for_opening_the_battery_caseCompare „13. Battery change“.8. Kerbe zum öffnen5. ON / OFF button6. Velcro attachement(back side)7. Battery case11. 2005 5