20 13 Drehfutter Lathe Chucks 2013

STD-H und STD-WZangenbacken und Nutensteine | Collet Jaws and T-NutsSTD-H and STD-Wfür ROTA NCD 315 for ROTA NCD 315NHhdLBTTØ DZangenbacken hart, STD-HHard collet jaws, STD-HZangenbacken-Rohlinge weich, STD-WSoft collet jaw blanks, STD-WNutensteine, NST-nuts, NSNutensteine, NKST-nuts, NKSTechnische DatenTechnical dataFuttertype Bezeichnung Spannbereich Nutenstein B H L N T Schrauben SatzChuck type Description Clamping range T-nut Screws SetID [mm] [mm] [mm] [mm] [mm] [mm] [kg]ROTA NCD 315 STD-H 31-1 0138230 14 - 22 NS 21/17 48.0 48.0 139.0 17.0 33.0 M12x30 3.33STD-H 31-2 0138231 22 - 30 NS 21/17 48.0 48.0 136.0 17.0 36.0 M12x30 3.25STD-H 31-3 0138232 30 - 38 NS 21/17 48.0 48.0 133.0 17.0 36.0 M12x30 3.1STD-H 31-4 0138233 38 - 46 NS 21/17 48.0 48.0 128.5 17.0 39.0 M12x30 2.92STD-H 31-5 0138234 46 - 54 NS 21/17 48.0 48.0 124.5 17.0 42.0 M12x30 2.73STD-H 31-6 0138235 54 - 62 NS 21/17 48.0 48.0 120.5 17.0 42.0 M12x30 2.5STD-H 31-7 0138236 62 - 70 NS 21/17 48.0 48.0 117.5 17.0 45.0 M12x30 2.36STD-H 31-8 0138237 70 - 78 NS 21/17 48.0 48.0 114.0 17.0 45.0 M12x30 2.2STD-H 31-9 0138238 78 - 86 NS 21/17 48.0 48.0 110.0 17.0 45.0 M12x30 2.05STD-H 31-10 0138239 86 - 94 NS 21/17 48.0 48.0 106.0 17.0 45.0 M12x30 1.9STD-W 315 0138253 21 - 94 NS 21/17 48.0 48.0 139.0 17.0 30.0 M12x30 4.35Technische Daten – NutensteineTechnical data – T-nutsFuttertype Bezeichnung S S 1 H h Gewinde Schrauben Max. zul. AnziehdrehmomentChuck type Description Thread Screws Max. adm. tightening torqueID [mm] [mm] [mm] [mm] [Nm]ROTA NCD 165 NS 80 0140100 12.0 17.2 7.0 M8 M8x22 30.0ROTA NCD 185 NKS 2 0143106 17.0 20.5 7.5 M12 M12x25 70.0ROTA NCD 215 NS 124 0142101 17.0 22.0 9.0 M12 M12x25 70.0ROTA NCD 255 NS 21/17 0140122 21.0 17.0 27.0 11.0 M12 M12x30 70.0ROTA NCD 315 NS 21/17 0140122 21.0 17.0 27.0 11.0 M12 M12x30 70.0i Pro Backensatz sind 3 Stück Nutensteine erforderlichSCHUNK Sonder- und Spezialbackensiehe Seite 588 – 613i Requires 3 pieces T-nuts per jaw setSCHUNK special and specialized jawssee page 588 – 613175