Untitled - ER Decor
Untitled - ER Decor
Untitled - ER Decor
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
<strong>ER</strong>-GEBÄUDE <strong>ER</strong>-BUILDINGS<br />
Farben, einen Pinsel oder Schwamm. Der Vorteil der<br />
<strong>ER</strong>-PIGMENT-Farben liegt darin, dass nach dem Trocken<br />
die Farbe sich matt darstellt. Plastikmodelle<br />
glänzen und müssen daher aufwendig nachbehandelt<br />
werden.<br />
Die notwendige Zeit entspricht etwa der eines Plastikmodells,<br />
wirkt aber realistischer. Im Allgemeinen wird<br />
zu 95% mit dem Schwamm gearbeitet. Diese Technik<br />
erfordert nur wenige Minuten für das Colorieren.<br />
Sie beenden den Zusammenbau mit dem Einsetzen<br />
der Fenster, Türen und den bemalten Rahmen. Erkennen<br />
Sie, wie einfach die <strong>ER</strong>-Technik arbeitet ?<br />
Und so erreicht man eine hohes Maß an realistischem<br />
Aussehen.<br />
Alle Holzteile sind aus Birkenmultiplex. Dies hat den<br />
Vorteil, dass das Holz sich nicht verzieht.<br />
Nun ein kleiner Tipp:<br />
Was ist der größte Feind des Modellbauers ?<br />
Antwort: Die Angst!<br />
Nur wer Angst hat etwas falsch zu machen, macht<br />
Fehler.<br />
Daher sollten Sie nicht zögern diese Kartonmodelle<br />
zusammen zubauen. Es ist leichter wie Sie denken.<br />
Diese Bausätze sind leichter zusammen zusetzen wie<br />
Plastikmodelle und Korrekturen sind einfacher.<br />
22<br />
get rid of it you have to paint the entire structure. The<br />
time needed to paint a plastic model is equivalent to<br />
the time taken to construct and paint a laser cut and<br />
engraved model and yet your results with the laser<br />
cut and engraved models will be much more realistic.<br />
95% of the time just use the sponge to apply the<br />
paint to the <strong>ER</strong>-BUILDING. With this technique it takes<br />
you only minutes to finish your model. Finish off the<br />
process by inserting the windows, doors and the<br />
painted framework.<br />
See how easy and quick these <strong>ER</strong>-BUILDINGS techniques<br />
work and how a very high degree of building<br />
realism is achieved.<br />
All the wooden parts are made of special birch plywood.<br />
This has the advantage that the wood will<br />
never warp.<br />
Here is a little tip for you:<br />
Question: What is the biggest enemy of the modeller?<br />
Answer: Fear !<br />
Only those who are afraid they will make mistakes will<br />
make mistakes.<br />
So ... don't be afraid of putting together a card model.<br />
It is easier than you think.<br />
In any event it is usually easier than putting a plastic<br />
model together and easier to make corrections.