dryer LKTA - Weisshaar GmbH & Co. KG

PLANUNGSDATEN
Please return to: WEISSHAAR GmbH & Co. KG • industrial refrigeration
Fon: +49 (0) 5 / 9 73 - 0 • Fax: +49 (0) 5 / 9 73 - 33 • E-Mail: info@weisshaar.com
Location/customer/project _______________________________________________________________
Application plastic/cement food or foodstuffs _______________
Use pneumatic feeding heat removal from mill _______________
Product _______________________________________________________________
Process
(e.g.“feed on suction side”) _______________________________________________________________
4
_______________________________________________________________
Air quantity (standard-m³/min) _______ varies from min. _______ to max. ____________
Inlet pressure (bar abs.) _______ inlet temperature (°C) _______ humidity
(r.h.% / g/kg) ____________
Desired dew point (°C) _______ or desired outlet temperature/humidity (°C/ r.h.) ____________
Climatic location of plant ________________________ outside temperature (°C) ____________
Where is the unit to be installed (e.g. engine room)? __________________________________
If outside: Is it sheltered? __________________________________
At what minimum temperature (°C) must the unit be run ? __________________________________
Is cooling water available which must be used ? _______ At which temperature? ________(°C)
Desired type of preliminary filter __________________________________
Voltage (volt) __________________________________
Frequency (Hz) __________________________________
Control voltage (volt) __________________________________
Do you request special material types? __________________________________
Do you desire special works standards? __________________________________
Special local conditions __________________________________
ATEX zone __________________________________
Explanatory process drawing/schemes:
CHECKLIST