E30 / E90 - LEONI Infrastructure & Datacom
E30 / E90 - LEONI Infrastructure & Datacom
E30 / E90 - LEONI Infrastructure & Datacom
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
BETAfixss ®<br />
130<br />
Sammelhalterung und Kabelkanal 2-in-1<br />
BETAfixss ® Insta-Clic<br />
Cable holder and conduit 2-in-1<br />
BETAfixss ® Insta-Clic<br />
Vorteile<br />
Ästhetisch gefälliger Kanal mit Funktionserhalt<br />
Schraubenlose und schnelle Befestigung<br />
Geprüfte Sicherheit<br />
Montageabstand ≤ 800 mm<br />
Deutliche Kostenersparnis gegenüber der<br />
Standardverlegung nach DIN 4102-12<br />
Anwendung<br />
Verlegesysteme · Laying systems<br />
Verlegung an Decke und Wand, horizontal, vertikal oder<br />
schräg<br />
Gleiche Zulassung für Sammelhalterung und Kabelkanal<br />
Ohne Einschränkung der Kabelanzahl und der Kabelgewichte<br />
Das jeweils gültige Prüfzeugnis (AbP) des Materialprüfungsamtes<br />
NRW ist massgebend<br />
Anwendung auch ohne DIN-Klassifikation möglich<br />
Material<br />
Sammelhalterung und Winkel Stahl verzinkt<br />
Deckel Stahlblech pulverbeschichtet ähnlich RAL 9010<br />
Advantages<br />
Appealing way to lay fire safety cables with circuit integrity<br />
Screwless and fast laying<br />
Approved security<br />
Mounting distance ≤ 800 mm<br />
Clear cost saving compared to the standard laying<br />
acc. to DIN 4102-12<br />
Application<br />
Single and Multiple laying on ceiling and walls, horizontally,<br />
vertically or angled<br />
Identic certification for cable holder and conduit<br />
No restriction of cable number and load<br />
Details see the valid test certificate (AbP) of the Materialprüfungsamt<br />
NRW<br />
Application without classification DIN possible<br />
Material<br />
Cable holder and corner pieces steel galvanised<br />
Cover sheet steel coated, similar to RAL 9010<br />
BETAfixss® Insta-Clic<br />
Verlegeart Abmessungen Abstand Einfach-/Mehrfachverlegung Klassifikation Zulassung<br />
Laying mode Dimensions. Distance Single/Multiple laying Classification Approval<br />
mm mm DIN 4102-12<br />
Insta-Clic<br />
≤ 20 × 70 ≤ 800 JE-H(St)H FE180 / <strong>E30</strong> ≥ n × 2 × 0,8 mm � <strong>E30</strong> Prüfzeugnis<br />
Insta-Clic<br />
von MPA NRW<br />
Certified<br />
≤ 20 × 70<br />
≤ 800 JE-H(St)H FE180 / <strong>E30</strong>-<strong>E90</strong> ≥ n × 2 × 0,8 mm � <strong>E90</strong><br />
by MPA NRW,<br />
JE-H(St)HRH FE180 / <strong>E30</strong>-<strong>E90</strong><br />
Germany<br />
NHXH FE180 / <strong>E90</strong><br />
≤ n × 16 mm²<br />
≤ 20 × 70 ≤ 800 NHXH FE180 <strong>E30</strong>-E60<br />
NHXCH FE180 / <strong>E30</strong>-E60<br />
≤ n × 10 mm² <strong>E30</strong><br />
www.leoni-infrastructure-datacom.com 5. 2011