1" Square Drive - Swan Plant Air Ltd

Piston & Concrete Scalers
Standard
Steel Tip
Standard
Steel Tip
Standard
Steel Tip
Optional
Carbide Tip
Optional
Carbide Tip
Optional
Carbide Tip
Standard
Carbide Tip
Michigan Pneumatic Model MP-401M
Scaling Hammer
Strong and lightweight with a single reciprocating piston and grip ring throttle.
Delivers rapid vibrating action to remove old paint, rust and scale from structural
steel, boilers, tanks and castings. No chisels are required as the hammer
piston itself acts as a chisel.
H-30203 Steel Tip Piston (each)
F22B00C550 Carbide Tip Piston (each)
Piston Diameter ................ 1-3/16"
Stroke ................................ 29/32"
Length ............................... 19-1/4"
Blows Per Minute ................. 8000
Michigan Pneumatic Model MP-40030
Triplex Scaler
Piston Diameter ................. 55/64"
Stroke ................................ 13/32"
Length ..................................... 13"
Blows Per Minute ................. 7000
Michigan Pneumatic Model MP-40030L
Piston Diameter ................. 55/64"
Stroke ................................ 13/32"
Length .............................13-1/16"
Blows Per Minute ................. 7000
Michigan Pneumatic Model MP-NCS-9
Height ....................................... 4"
Weight ............................... 4.6 lbs.
Air Inlet Thread ...................... 3/8"
Avg. Air Consumption: 14.1 cfm
Designed for heavy-duty work such as cleaning, scaling bridges, ship decks
and hulls, railroad cars, structural steel pipe, and roughing concrete. Can be
mounted to a frame for multiple tool work. A dead handle is standard, and
may be replaced with a pipe plug for scaling in close quarters. Either boss can
be used as the air inlet.
H-31203 Steel Tip Piston (each)
F24B00C550 Carbide Tip Piston (each
Height ................................. 3-3/8"
Weight .................................. 7 lbs.
Air Inlet Thread ...................... 3/8"
Avg. Air Consumption: 19.4 cfm
Lever Type Triplex Scaler
Designed for heavy-duty work such as cleaning, scaling bridges, ship decks
and hulls, railroad cars, structural steel pipe, and roughing concrete. Can be
mounted to a frame for multiple tool work. A dead handle is standard, and
may be replaced with a pipe plug for scaling in close quarters. Either boss can
be used as the air inlet.
H-31203 Steel Tip Piston (each)
F24B00C550 Carbide Tip Piston (each)
Height ................................. 3-3/8"
Weight ............................... 8.4 lbs.
Air Inlet Thread ...................... 1/2"
Avg. Air Consumption: 19.4 cfm
Lorry Type Concrete Scaler
Features nine built-in reciprocating pistons. Carbide tipped pistons
effectively remove laitance covering the surface of primary concrete.
Simultaneously forms a desirable surface coarseness to facilitate spreading
and adhering of the final layers. New device rolls easily on two wheels to cut
time and cost. Scales concrete at a rate of 23 to 28 square yards per hour.
H-34203 Carbide Tip Piston (each)
Piston Diameter .................. 1-1/2"
Number of Pistons ...................... 9
Rec’d Hose Size .................... 3/4"
Blows Per Minute ................. 4000
Replacement pistons available.
Height ..................................... 17"
Weight .............................. 198 lbs.
Air Inlet Thread ...................... 3/4"
Avg. Air Consumption: 30 cfm
109