1" Square Drive - Swan Plant Air Ltd

JET Electric Hoists & Hand Winches
Light-Duty Electric Hoist SS-1B Series
Model
No.
151060
151061
151062
151110
151111
151112
1100 lbs.
2200 lbs.
4400 lbs.
1100 lbs.
2200 lbs.
4400 lbs.
Model
151340
Model
No.
151340
151341
151342
Capacity
500 lbs.
500 lbs.
1000 lbs.
Industrial Hand Winches
• Lightweight and compact aluminum
housing provides strength and portability.
• Electric motor features red light overload
sensor to warn of overload.
• For intermittent use only, motor not to
exceed 2 minutes “on” time at full load.
• Ergonomic, single-speed, pushbutton
control with 6 ft. cable.
• Upper and lower limit switches regulate
load travel.
Standard
Lift
10 ft.
20 ft.
10 ft.
Rugged, lightweight and efficient. Designed for years of safe, smooth
operation. Useful for most types of lifting, lowering, moving or securing.
Featuring double brake pawl for maximum safety and quiet operation.
Brake mechanism is made of hardened steel. Brake, gear sections and
bearings are sealed for dust and weather protection. Handle length is
easily adjustable. *Capacity rating is based on one layer of line around
the drum. As the line builds on the drum, the capacity decreases.
No. of
Falls
1
1
2
Lifting
Speed
12 ft./min.
12 ft./min.
6 ft./min.
• Permanently lubricated, hardened steel
self-locking gears work as a brake to hold
the load even if power is interrupted.
• 18" Power cord.
• Safety hooks and chain container
standard.
• Meets OSHA and ANSI B30.16 standards.
Headroom
15"
15"
15"
Motor
1/3HP, 1Ph, 115/230V
1/3HP, 1Ph, 115/230V
1/3HP, 1Ph, 115/230V
Motor
Rating
12 min./hr.
12 min./hr.
12 min./hr.
Model IWF-1000N Model IWF-3000N
Weight
Extra lifts are not available for the SS-1B series. Not for use in explosive or corrosive environments.
Heavy-Duty Electric Hoist SS Series
• Single phase or three phase models.
• Reverse phase protection on all three
phase models.
• Single phase units equipped with thermal
overload relay.
• Operates on 50Hz power with only a 16%
reduction in lifting speed.
• Quick-connect power and single-speed
pushbutton controls.
Capacity
Standard
Lift
10 ft.
10 ft.
10 ft.
10 ft.
10 ft.
10 ft.
No. of
Falls
1
1
2
1
1
2
Lifting
Speed
14 ft./min.
10 ft./min.
5 ft./min.
28 ft./min.
24.2 ft./min.
12.1 ft./min.
• 8 ft. pushbutton control cord, 16 ft. power
cable, safety hooks and chain container.
• Reliable electro-magnetic DC brake.
• Upper and lower limit switches.
• 24V two-station pushbutton control unit.
• Modular construction on motor, gear and
brake assemblies.
• Hook or lug-mount for electric trolley.
• Tested and certified to 125% of rated
capacity.
Headroom
19"
22-7/16"
28"
19"
22-7/16"
28"
Motor
0.6HP, 1Ph, 115/230V
1.2HP, 1Ph, 115/230V
1.2HP, 1Ph, 115/230V
1.2HP, 3Ph, 230/460V
2.1HP, 3Ph, 230/460V
2.1HP, 3Ph, 230/460V
Motor
Rating
15 min./hr.
15 min./hr.
15 min./hr.
18 min./hr.
18 min./hr.
18 min./hr.
Weight
95 lbs.
135 lbs.
150 lbs.
90 lbs.
130 lbs.
145 lbs.
Single phase models prewired 115V. Three phase models prewired 230V. Please specify required voltage
when ordering. Larger capacity hoists and extra lifts are available.
Model
No.
IWF-100N
IWF-300N
IWF-500N
IWF-1000N
IWF-2000N
IWF-3000N
Lifting
Capacity
1st Layer*
220 lbs.
551 lbs.
882 lbs.
1653 lbs.
2425 lbs.
3748 lbs.
Lifting
Capacity
Last Layer*
115 lbs.
311 lbs.
540 lbs.
996 lbs.
1616 lbs.
2846 lbs.
Pulling
Capacity
1200 lbs.
3300 lbs.
5000 lbs.
10000 lbs.
14000 lbs.
20000 lbs.
Drum
Capacity
5/32" x 131 ft.
3/16" x 131 ft.
1/4" x 98 ft.
5/16" x 98 ft.
3/8" x 98 ft.
1/2" x 66 ft.
Pull to
Lift Load
26 lbs.
20 lbs.
25 lbs.
22 lbs.
22 lbs.
33 lbs.
Model
151061
Handle Gear
Length Ratio Weight
9-13/16"
1:1 16 lbs.
13-3/4" 2.88:1 27 lbs.
13-3/4" 4.33:1 30 lbs.
13-3/4" 12.2:1 43 lbs.
13-3/4" 22.2:1 57 lbs.
13-3/4" 28.85:1 101 lbs.
This equipment is not to be used for lifting, supporting or transporting people, or for lifting or supporting loads over people.
16 lbs.
18 lbs.
20 lbs.
125