1" Square Drive - Swan Plant Air Ltd

Air Line Accessories
360º Swivels
Bi-directional 360º rotation universal joint keeps air hoses straight and
untwisted. Increases the maneuverability of air tools and decreases
operator fatigue.
Model 922A 1/4" NPT (Aluminum)
Model 933A 3/8" NPT (Aluminum)
Model 933ST 3/8" NPT (Steel)
Model 944A 1/2" NPT (Steel)
Safety Excess Flow Check Valve
• OSHA approved.
• Tamper proof construction.
• Allows full, unrestricted airflow.
• Protects personnel and property from
whipping air hoses.
• Automatically shuts off air flow in case
of sudden air line break.
• Automatic reset after line repair.
Part No. Inlet Thd. Outlet Thd.
SV802
SV803
SV804
SV806
SV808
1/4" FPT
3/8" FPT
1/2" FPT
3/4" MPT
1" MPT
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
1" FPT
Air Manifolds
Keep the work site uncluttered by using only
one hose to power up to eight tools at once.
Equipped with a gauge to monitor working
pressure and a 200 psi pop-off valve to
prevent excessive pressure build-up. Easily
bolts to skids or other surfaces and multiple
manifolds can be used in tandem.
Model No.
MP-2AMF-TNK
MP-3AMF-TNK
Weight
63 lbs.
23 lbs.
Height
18"
10"
Michigan Pneumatic Model MP-1AMF
Radial Air Manifold
Length
34.5"
23.0"
Tank
Diameter
12"
8"
Used in any industry with a need for multiple outlets of air to supply
various pneumatic tools simultaneously. The 1-1/2" inlet can be
dispersed through up to six separate outlets using 3/4" CP
couplings. Each outlet is regulated by a bronze safety lock ball valve.
Features a pressure relief valve for protection against excessive pressure
and filters for clean air.
Diameter .................................................................................. 36"
Height ...................................................................................... 15"
Weight ...............................................................................102 lbs.
Air Inlet ................................................................................ 1-1/2"
Air Inlet Hose Swivels
For use on all chipping hammers and rivet busters. Designed to eliminate
hose kinking or twisting for greater operator efficiency. Swivels available
with 1/2" x 10 ft. whip hoses.
Model L-1 7/8"-24 thread with 1/2" hose barb (swivel only)
Model L-1-Whip Swivel with 1/2" x 10 ft. whip hose and CP fitting
Model L-2 7/8"-24 thread with 3/8" male NPT (swivel only)
Model L-3 1/2" male NPT with 1/2" hose barb (swivel only)
Model L-3-Whip Swivel with 1/2" x 10 ft. whip hose and CP fitting
Model L-4 7/8"-24 thread with 3/8" female NPT (swivel only)
Model L-5 3/8" male NPT with 1/2" hose barb (swivel only)
Model L-5-Whip Swivel with 1/2" x 10 ft. whip hose and CP fitting
Screened Inlet Bushings
Keeps rust and other air line debris from
contaminating your tools. Manufactured from
solid steel with brass screens pressed into the
bushing. Made in the U.S.A.
Model No. Description
1989
1990
1991
1992
1993
1994
1995
Model MP-3AMF-TNK
Width
w/Fittings
22.0"
18.5"
1/4" MPT x 1/4" FPT
1/4" MPT x 3/8" FPT
3/8" MPT x 1/4" FPT
3/8" MPT x 3/8" FPT
3/8" MPT x 1/2" FPT
1/2" MPT x 3/8" FPT
1/2" MPT x 1/2" FPT
Inlet Size
2"
1"
Model MP-2AMF-TNK
Number of
Outlets
8
4
Working
Pressure
200 psi
200 psi
Capacity
15 gallons
2.5 gallons
133