Fiber Solutions.pdf - Anixter

Fiber Solutions
Corning Cable Systems
Indoor Cables
(continued) MIC Plenum Cables (2-24 Fiber)
3.30
LASER-OPTIMIZED 50/125 MULTIMODE (PRETIUM 550/OM4)
Maximum attenuation: 2.8/1.0 dB/km (850/1300 nm); minimum LED bandwidth: 1,500/500 MHz•km (850/1300 nm); effective modal bandwidth: 4,700 MHz•km (850 nm);
serial Gigabit Ethernet distance guarantee: 1,000/600 m (850/1300 nm); serial 10 Gigabit Ethernet distance guarantee: 550 m (850 nm)
Max. Tensile Load Min. Bend Radius
No. of
Cable O.D. Installation Long Term. Installation Long Term
Anixter No. Vendor No.
8.3/125 SINGLE-MODE (OS2)
Maximum attenuation: 0.65/0.65/0.5 dB/km (1310/1383/1550 nm); serial Gigabit Ethernet distance: 5,000 m (1310 nm)
Max. Tensile Load Min. Bend Radius
No. of
Cable O.D. Installation Long Term. Installation Long Term
Anixter No. Vendor No.
Fibers (in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)
370-948-SMODE-02 002E88-31131-29 2 0.20 5.0 100 440 30 132 3.0 7.5 1.0 2.5
370-948-SMODE-04 004E88-31131-29 4 0.21 5.3 100 440 30 132 3.2 8.0 1.1 2.7
370-948-SMODE-06 006E88-31131-29 6 0.21 5.3 100 440 30 132 3.2 8.0 1.1 2.7
370-948-SMODE-12 012E88-33131-29 12 0.24 6.1 100 440 30 132 3.6 9.2 1.2 3.1
370-948-SMODE-24 024E88-33131-29 24 0.31 7.8 150 660 45 200 4.6 11.7 3.1 7.8
Cables;Fiber Optic, Indoor, Plenum/2024
Index1.Cabling Systems//Fiber Cable-Indoor//CSA FT-6 Plenum-Rated Fiber Cable
Fibers
CORNING CABLE SYSTEMS PR12854V2-24286.eps
Corning Cable Systems Plenum MIC Unitized Cables are multi-fiber cables with stranded subunits of 6 or
12 900 µm TBII Buffered Fibers surrounded by a dielectric strength member and a flame-retardant outer
jacket. These cables meet the application requirements of the National Electrical Code (NEC Article 770) and
are OFNP- and FT6-listed. They are ideal for routing inside buildings within plenum areas and riser shafts to the
telecommunications rooms and workstations.
FEATURES
• Stranded subunits of 6 or 12 900 µm fibers
• TBII Buffered Fibers enable easy, consistent stripping
• Available in 62.5 µm, 50 µm, single-mode and hybrid versions
• All-dielectric cable construction requires no grounding or bonding
• Available with metallic interlocking armor up to 72 fibers
• Meets application requirements of the National Electrical Code (NEC Article 770)
• Listed OFNP and FT6
• Available with Gigabit Ethernet and 10 Gigabit Ethernet performance
(in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)
370-COROM4-TBD-06 006T88-31190-29 6 0.21 5.3 100 440 30 132 3.2 8.0 1.1 2.7
370-COROM4-TBD-12 012T88-33190-29 12 0.24 6.1 100 440 30 132 3.6 9.2 1.2 3.1
370-COROM4-TBD-24 024T88-33190-29 24 0.31 7.8 150 660 45 200 4.6 11.7 3.1 7.8
HYBRID: 62.5/125 MULTIMODE (OM1) AND 8.3/125 SINGLE-MODE (OS2)
Max. Tensile Load Min. Bend Radius
No. of
Cable O.D. Installation Long Term. Installation Long Term
Anixter No. D
Vendor No.
Fibers (in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)
370-949-HYBRID-6/6 012X88-A9031-29 6 MM/6 SM 0.24 6.1 100 440 30 132 3.6 9.2 1.2 3.1
370-949-HYBRID-12/6 018X88-A9045-29 12 MM/6 SM 0.29 7.4 150 660 45 200 4.4 11.1 2.9 7.4
370-949-HYBRID-12/12 024X88-A9036-29 12 MM/12 SM 0.31 7.8 150 660 45 200 4.6 11.7 3.1 7.8
370-949-HYBRID-18/6 024X88-A9035-29 18 MM/6 SM 0.31 7.8 150 660 45 200 4.6 11.7 3.1 7.8
370-949-HYBRID-24/12 036X88-A9038-29 24 MM/12 SM 0.58 14.8 150 660 45 200 8.7 22.2 5.8 14.8
MIC Unitized Plenum Cables (36-144 Fiber)
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature