Fiber Solutions.pdf - Anixter
Fiber Solutions.pdf - Anixter
Fiber Solutions.pdf - Anixter
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Fiber</strong> <strong>Solutions</strong><br />
Corning Cable Systems<br />
Indoor Cables<br />
Cables;<strong>Fiber</strong> Optic, Cordage/2026<br />
Index1.Cabling Systems//<strong>Fiber</strong> Cable-Indoor//Nonplenum-Rated <strong>Fiber</strong> Cable<br />
2-fiber Zipcord Riser Cables<br />
CORNING CABLE SYSTEMS pr4536V2-9156.eps<br />
Corning Cable Systems Zipcord Cable utilizes two 900 µm TBII Buffered <strong>Fiber</strong>s surrounded by<br />
aramid yarn-strength members with a flame-retardant jacket. This cable meets the application<br />
requirements of the National Electrical Code (NEC Article 770) and is listed as Type OFNR and CSA<br />
FT4. Zipcord cable is ideal for interconnect applications and is available with approval for<br />
TEMPEST applications.<br />
FEATURES<br />
• Flame-retardant outer jacket<br />
• Dielectric strength members<br />
• TBII Buffered <strong>Fiber</strong> for easy coating removal<br />
• Buffering diameter: 900 µm<br />
• Approvals and listings: NEC OFNR, CSA FT4, ICEA S-83-596<br />
• Flame resistance: UL 1666 (for riser and general building applications)<br />
• Has strength members<br />
• Not compatible with MT-RJ connectors<br />
3.40<br />
62.5/125 MULTIMODE (OM1)<br />
Maximum attenuation: 3.4/1.0 dB/km (850/1300 nm); minimum LED: 200/500 MHz•km (850/1300 nm); effective modal bandwidth: 220 MHz•km (850 nm);<br />
serial Gigabit Ethernet distance: 300/550 m (850/1300 nm)<br />
Max. Tensile Load Min. Bend Radius<br />
No. of Cable O.D.<br />
Installation Long Term. Installation Long Term<br />
<strong>Anixter</strong> No. Vendor No. <strong>Fiber</strong>s (in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)<br />
370-147-62SJ-2 002K51-31141-24 2 0.11 x 0.22 2.8 x 5.6 50 220 15 66 2.0 5.0 0.55 1.4<br />
STANDARD 50/125 D MULTIMODE (OM2)<br />
Maximum attenuation: 2.8/1.0 dB/km (850/1300 nm); minimum LED: 700/500 MHz•km (850/1300 nm); effective modal bandwidth: 950 MHz•km (850 nm);<br />
serial Gigabit Ethernet distance: 750/600 m (850/1300 nm)<br />
Max. Tensile Load Min. Bend Radius<br />
No. of Cable O.D.<br />
Installation Long Term. Installation Long Term<br />
<strong>Anixter</strong> No. Vendor No. <strong>Fiber</strong>s (in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)<br />
371-COROM2-ZIP2.8-02 002T51-31131-24 2 0.11 x 0.22 2.8 x 5.6 50 220 15 66 2.0 5.0 0.55 1.4<br />
8.3/125 SINGLE-MODE (OS2)<br />
Maximum attenuation: 0.65/0.65/0.5 dB/km (1310/1383/1550 nm); serial Gigabit Ethernet distance: 5,000 m (1310 nm)<br />
Max. Tensile Load Min. Bend Radius<br />
No. of Cable O.D.<br />
Installation Long Term. Installation Long Term<br />
<strong>Anixter</strong> No. Vendor No. <strong>Fiber</strong>s (in.) (mm) (lb.) N (lb.) N (in.) (cm) (in.) (cm)<br />
370-147-SMODE-2 002E51-31131-24 2 0.11 x 0.22 2.8 x 5.6 50 220 15 66 2.0 5.0 1.0 2.5<br />
Application Notes;<strong>Fiber</strong> Jumper Cordage/803<br />
Index1.Support and Supplies//Tools//Installation<br />
Applicaton Notes<br />
<strong>Fiber</strong> Jumper Cordage<br />
Zipcord duplex, dual-subunit duplex and simplex jumper cordage require no breakout kit for connectorization. Jacket O.D. on the individual units is 1.6 to 3.0 mm.<br />
Round duplex jumper cordage typically used for duplex connector cable assemblies (i.e., FDDI, MT-RJ) requires a breakout kit only if the other end of the cable assembly<br />
is to be connectorized with simplex connectors (ST, FC, etc.). No breakout kit is used if round duplex cordage is to be connectorized at both ends with a duplex connector.<br />
Note: One side of zipcord is printed the entire length to identify fiber #1 from #2.<br />
Request the latest literature and guides from <strong>Anixter</strong>.<br />
1.800.ANIXTER • anixter.com/literature
Change language