photoelectric sensors - Koning & Hartman
photoelectric sensors - Koning & Hartman
photoelectric sensors - Koning & Hartman
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FR-KV1<br />
Features<br />
36<br />
SENSORS FOR SEMICONDUCTOR / FPD INDUSTRY<br />
Retrorefl ective type: new concept<br />
A 2.0mm fi ber head and an ultrathin 2.2mm refl ector allow<br />
these <strong>sensors</strong> to be mounted even in thin robot hands. Since<br />
they are retrorefl ective type fi bers, the amount of wiring needed<br />
can be reduced, and the robot hands require less processing<br />
and so can be kept strong. A heat-resistant type that can resist<br />
heat of �105°C is also available.<br />
2.2mm<br />
7.5mm<br />
21.5mm<br />
4mm<br />
2mm<br />
Technical Specifi cations<br />
Applicable amplifi ers: FX-100/301/305/311/411 series<br />
Sensing range:<br />
(at LONG mode of red<br />
LED type)<br />
Allowable bending<br />
radius:<br />
Retrorefl ective type 15 to 330mm<br />
(Note: thru-beam type 500mm)<br />
R10mm or more<br />
Fiber cable length: 2m (free-cut)<br />
FR-KV1<br />
Wafer Xxxxxxmapping<br />
fi ber<br />
07/2010<br />
Thru-beam type: ultra compact size<br />
The ultra compact size of 2�1.52�20mm (W�H�D) means<br />
that mounting is possible even in places such as robot hands<br />
where space is limited. Furthermore, a heat-resistant type that<br />
can resist heat of �105°C is also available.<br />
1.5mm<br />
20mm<br />
2mm<br />
2mm<br />
With the FT-KV1, the fiber can be embedded into a plate with a thickness of 2mm.
Change language