StorageTek SL500 User's Guide - Downloads - Oracle

More documents

Recommendations

Info

Controls and Indicators FIGURE 1-3 Buttons and Indicators 1. Door Open button 5. Service Required LED 2. Door Open LED 6. Library Active LED 3. CAP Open button 7. Service Robot LED 4. CAP Open LED 7 TABLE 1-5 Keypad Buttons and Indicators 1 2 3 4 Buttons/Indicator Description Service Robot Indicator LED is lit when the robot is not functioning. The service representative might need to check the log_error file for the result code and perform the appropriate action. Library Active Indicator LED is active when the library is active. 12 SL500 User’s Guide • June 2010 Revision: KB • 96116 6 5 L204_014
TABLE 1-5 Keypad Buttons and Indicators (Continued) Buttons/Indicator Description Service Required See TABLE 1-6 for details. Indicator Open Door Indicator Open CAP Indicator TABLE 1-6 Keypad Service Required LED ■ LED is normally not lit. ■ LED is lit when the library experiences a failure or is in a non-ready state. Controls and Indicators ■ LED flashes amber when the Open Door button is pressed. ■ LED is solid amber when the robot is parked in the robotics unit. ■ LED flashes during initialization and audit. ■ LED is not lit when the library is ready for customer use. Button When pressed: 1. Software allows the current job to complete. This could take a while. 2. Software retracts the robot into the robotics unit so that it will not be damaged when you open the door with the key. ■ LED is amber when any CAP doors are open. ■ LED is not lit when all CAP doors are shut. Button Button is used to open all CAP doors in a rack. Activity Meaning Action Flashing The redundant component failed. The service representative might need to replace the failed redundant component, such as power supply, tape drive, or fan. Diagnostics are running. Nothing, this is normal. Diagnostics failed. The service representative might need to check the log_error file for the result code and perform the appropriate action. Door is open. Close and lock the door. On solid The non-redundant component failed. This includes the last working component of a redundant set of components, such as tape drives. The service representative might need to check the log_error and log_warning files to determine which component failed, and replace the failed component. The library has stopped operating. The service representative might need to check the log_error file for the result code and perform the appropriate action. 96116 • Revision: KB Chapter 1 SL500 Introduction 13
Page 1 and 2: Part Number: 96116 June 2010, Revis
Page 3 and 4: Contents Summary of Changes xix Pre
Page 5 and 6: Help Navigation 34 Tips for Using t
Page 7 and 8: Storage Cells and Drives 100 Orphan
Page 9 and 10: Display Library Status 200 Display
Page 11 and 12: Physical Audit 275 Verified Audit 2
Page 13 and 14: Replace a Cleaning Cartridge 357 A.
Page 15 and 16: Figures FIGURE 1-1 Front View of Li
Page 17 and 18: Tables TABLE 1-1 LTO Storage Cell a
Page 19 and 20: Summary of Changes EC Date Revision
Page 21 and 22: EC000591, July 2008, Revision KA (c
Page 23 and 24: Preface This User’s Guide is inte
Page 25 and 26: Documentation, Support, and Trainin
Page 27 and 28: CHAPTER 1 SL500 Introduction This c
Page 29 and 30: FIGURE 1-2 Back View of Library Com
Page 31 and 32: LTO Storage Cell and Drive Capaciti
Page 33 and 34: Library with Mixed-Media Storage Ce
Page 35 and 36: TABLE 1-2 Mixed-Media Storage Cell
Page 37: ■ Open the door ■ Open all CAPs
Page 41 and 42: Tape Drives and Cartridges The libr
Page 43 and 44: ■ The specific vender Web site
Page 45 and 46: Robotics Unit The hand assembly con
Page 47 and 48: FIGURE 1-5 Hand Assembly 1. Gripper
Page 49 and 50: Safety Features Safety Features The
Page 51 and 52: Tape Management Software Tape Manag
Page 53 and 54: CHAPTER 2 StorageTek Library Consol
Page 55 and 56: 9 SL Console Screen Display SL Cons
Page 57 and 58: SL Console Screen Display host appl
Page 59 and 60: Report Procedures For report proced
Page 61 and 62: SL Console Help The top of the SL C
Page 63 and 64: Web-launched SL Console Starting th
Page 65 and 66: Standalone SL Console Updates Stand
Page 67 and 68: General SL Console Usage Tasks Gene
Page 69 and 70: Note - You can bookmark this URL fo
Page 71 and 72: c. Click Run. General SL Console Us
Page 73 and 74: General SL Console Usage Tasks ▼
Page 75 and 76: c. Click Run. General SL Console Us
Page 77 and 78: ▼ Log in to the Standalone SL Con
Page 79 and 80: ▼ Log Off the SL Console General
Page 81 and 82: General SL Console Report Tasks Gen
Page 83 and 84: 3. Click the report you want to dis
Page 85 and 86: Note - The search is case-sensitive
Page 87 and 88: 4. Click Save. The Save popup appea
Page 89 and 90:
Standalone SL Console Installation
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
CHAPTER 3 Hardware Activation Files
Page 97 and 98:
Hardware Activation File Task Summa
Page 99 and 100:
Hardware Activation File Tasks ▼
Page 101 and 102:
Hardware Activation File Tasks ▼
Page 103 and 104:
Hardware Activation File Tasks 2. S
Page 105 and 106:
Hardware Activation Screen Referenc
Page 107 and 108:
Sequence Number Display only. Hardw
Page 109 and 110:
Hardware Activation > Install Hardw
Page 111 and 112:
Browse Hardware Activation Screen R
Page 113 and 114:
CHAPTER 4 Capacity on Demand The SL
Page 115 and 116:
Module Base Module LTO Activated Ca
Page 117 and 118:
Implementing Changes to Activated C
Page 119 and 120:
CHAPTER 5 Library Partitioning Note
Page 121 and 122:
Installing the Partitioning Feature
Page 123 and 124:
■ Partition 6 FIGURE 5-1 Library
Page 125 and 126:
Library Internal Address Partitions
Page 127 and 128:
■ Perform an audit of the library
Page 129 and 130:
Partitions and CAPs Once you have a
Page 131 and 132:
Partitioning Process Information in
Page 133 and 134:
Partition Configuration Tasks Task
Page 135 and 136:
▼ Create a Partition Partition Co
Page 137 and 138:
▼ Configure a Host-Partition Conn
Page 139 and 140:
Partition Configuration Tasks Note
Page 141 and 142:
Partition Configuration Tasks 5. To
Page 143 and 144:
▼ Commit Partition Configuration
Page 145 and 146:
Partition Management Tasks Task Pag
Page 147 and 148:
▼ Delete a Partition Partition Ma
Page 149 and 150:
▼ Modify Host-Partition Connectio
Page 151 and 152:
5. Click OK to confirm the deletion
Page 153 and 154:
▼ Reallocate Library Resources Pa
Page 155 and 156:
Partition Report Tasks Task Page Di
Page 157 and 158:
2. In the pull-down menu, select th
Page 159 and 160:
▼ Save Partition Report Data Part
Page 161 and 162:
▼ Enter Cartridges Into a Partiti
Page 163 and 164:
CAP Operation Tasks partitions, ope
Page 165 and 166:
5. Click the Assign CAP Button tab.
Page 167 and 168:
Partition Screen Reference Partitio
Page 169 and 170:
Partitions—Instructions (Step 1)
Page 171 and 172:
Partitions—Summary (Step 2) Sampl
Page 173 and 174:
TOTAL LIBRARY RESOURCES Storage Cel
Page 175 and 176:
Partition Summary Screens Partition
Page 177 and 178:
Page 179 and 180:
Partition Summary Screens Note - Ea
Page 181 and 182:
Barcode Presentation Required. Tape
Page 183 and 184:
Page 185 and 186:
Partition Design and Commit Screens
Page 187 and 188:
Page 189 and 190:
- Storage cells have been configure
Page 191 and 192:
Page 193 and 194:
Save OK Partition Design and Commit
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Partition Report Screens Partitions
Page 201 and 202:
Screen Fields Please select a repor
Page 203 and 204:
Screen Fields Module Row Display on
Page 205 and 206:
Partition Report Screens Partitions
Page 207 and 208:
Partition ID Display only. Partitio
Page 209 and 210:
Screen Fields Module Row Display on
Page 211 and 212:
Screen Fields Partition Name Displa
Page 213 and 214:
Partitions—Reports—Partition Su
Page 215 and 216:
See Also ■ Partitions—Reports
Page 217 and 218:
Diagnostics > CAP—Assign CAP Butt
Page 219 and 220:
See Also None Partition CAP Operati
Page 221 and 222:
CHAPTER 6 Library Management Automa
Page 223 and 224:
Library and Device Status Library a
Page 225 and 226:
Library Management Tasks Task Page
Page 227 and 228:
▼ Display Library Configuration I
Page 229 and 230:
3. Reboot the library for the chang
Page 231 and 232:
▼ Display Library Physical Config
Page 233 and 234:
▼ Display Library Statistics Libr
Page 235 and 236:
Screen Fields Start Date Display on
Page 237 and 238:
CHAPTER 7 CAP Management CAP Operat
Page 239 and 240:
▼ Display CAP Summary Information
Page 241 and 242:
▼ Display CAP Properties CAP Mana
Page 243 and 244:
CHAPTER 8 Drive Management You can
Page 245 and 246:
▼ Display Drive Summary Informati
Page 247 and 248:
▼ Display Drive Properties Drive
Page 249 and 250:
▼ Display Current Drive Mappings
Page 251 and 252:
▼ Display Drive Mapping History D
Page 253 and 254:
▼ Display the Media Drive Events
Page 255 and 256:
▼ Display the Drive Distribution
Page 257 and 258:
Drive Management Tasks Total number
Page 259 and 260:
Drive Management Tasks 3. In the Se
Page 261 and 262:
CHAPTER 9 Cartridge Management All
Page 263 and 264:
▼ Enter Cartridges Through the CA
Page 265 and 266:
▼ Eject Cartridges Through the CA
Page 267 and 268:
3. Click Cartridge Summary. The Car
Page 269 and 270:
3. In the Source Location Mode fiel
Page 271 and 272:
Cartridge Management Tasks 9. To ve
Page 273 and 274:
3. In the Source Location Mode fiel
Page 275 and 276:
Cartridge Management Tasks 10.To ve
Page 277 and 278:
CHAPTER 10 Drive Cleaning The libra
Page 279 and 280:
Drive Cleaning Tasks Task Page Conf
Page 281 and 282:
Drive Cleaning Tasks 4. In the Thre
Page 283 and 284:
Drive Cleaning Tasks Caution - Poss
Page 285 and 286:
Drive Cleaning Tasks Note - To help
Page 287 and 288:
▼ Display Drive Cleaning Status U
Page 289 and 290:
4. Click the Start Clean button in
Page 291 and 292:
CHAPTER 11 Robot Management Robotic
Page 293 and 294:
▼ Display Robot Summary Informati
Page 295 and 296:
▼ Display Robot Statistics Robot
Page 297 and 298:
CHAPTER 12 SL Console Diagnostics a
Page 299 and 300:
Library Firmware Upgrades Note - Th
Page 301 and 302:
Audits Audits An audit is the proce
Page 303 and 304:
Robot Diagnostic Moves Robot Diagno
Page 305 and 306:
Diagnostic Move Control Functions T
Page 307 and 308:
TABLE 12-1 Troubleshooting Table (C
Page 309 and 310:
Event Monitor Tasks Task Page Displ
Page 311 and 312:
Event Monitor Tasks 3. Click the ev
Page 313 and 314:
The Save popup appears. Event Monit
Page 315 and 316:
Library Utility Tasks Task Page Per
Page 317 and 318:
Library Utility Tasks The test begi
Page 319 and 320:
▼ Perform a Disruptive Library Se
Page 321 and 322:
Library Utility Tasks 6. When the t
Page 323 and 324:
7. Click OK to terminate this SL Co
Page 325 and 326:
Library Utility Tasks 6. In the Fil
Page 327 and 328:
Library Utility Tasks 4. The Availa
Page 329 and 330:
▼ Audit the Entire Library During
Page 331 and 332:
▼ Audit a Range of Cells Audit Ta
Page 333 and 334:
▼ Perform a Verified Audit Audit
Page 335 and 336:
Drive Utility Tasks Task Page Perfo
Page 337 and 338:
▼ Reboot a Drive Use this procedu
Page 339 and 340:
Robot Utility Tasks Task Page Defin
Page 341 and 342:
4. In the Defined Sequence section,
Page 343 and 344:
10.Click Finish to complete the set
Page 345 and 346:
4. From the Defined Sequences secti
Page 347 and 348:
Robot Utility Tasks 4. Click the di
Page 349 and 350:
Robot Utility Tasks 4. From the Def
Page 351 and 352:
3. Use the File menu in each Monito
Page 353 and 354:
CHAPTER 13 SNMP Support Simple Netw
Page 355 and 356:
SNMP Configuration and Usage Tasks
Page 357 and 358:
▼ Delete SNMP Users Use this proc
Page 359 and 360:
▼ Delete Trap Recipients Use this
Page 361 and 362:
▼ Transfer the Library MIB File S
Page 363 and 364:
CHAPTER 14 Manual Operations When i
Page 365 and 366:
General Library Operation Tasks Gen
Page 367 and 368:
▼ Power On the Library To power o
Page 369 and 370:
▼ Open the Front Door (With Power
Page 371 and 372:
General Library Operation Tasks War
Page 373 and 374:
▼ Secure the Front Door (Without
Page 375 and 376:
▼ Locate and Remove a Cartridge T
Page 377 and 378:
Cartridge Handling Tasks 2. Insert
Page 379 and 380:
▼ Remove a Cartridge from a Tape
Page 381 and 382:
Cartridge Handling Tasks ▼ Remove
Page 383 and 384:
▼ Replace a Cleaning Cartridge Ca
Page 385 and 386:
APPENDIX A TABLE A-1 Cell Figure Le
Page 387 and 388:
FIGURE A-1 Base Module LTO Cells M
Page 389 and 390:
FIGURE A-3 LTO Cell Locations for S
Page 391 and 392:
Mixed-Media Configurations Mixed-Me
Page 393 and 394:
FIGURE A-6 Mixed-Media Firmware Cel
Page 395 and 396:
FIGURE A-8 Mixed-Media Cells for Ba
Page 397 and 398:
FIGURE A-9 Library and Rack Dimensi
Page 399 and 400:
Library Component Weights The follo
Page 401 and 402:
APPENDIX B Cartridge Information Th
Page 403 and 404:
Ordering Cartridges and Labels Colo
Page 405 and 406:
LTO (Ultrium) Cartridges Discuss wh
Page 407 and 408:
Labels must be attached as shown in
Page 409 and 410:
SDLT/DLT-S4 Cartridges SDLT/DLT-S4
Page 411 and 412:
SDLT/DLT-S4 Cartridges Note - Discu
Page 413 and 414:
Cartridge Handling Tasks Task Page
Page 415 and 416:
APPENDIX C Web-launched SL Console
Page 417 and 418:
Server Installation and Management
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
5. On the Web Applications screen,
Page 431 and 432:
8. On the Results screen, click Clo
Page 433 and 434:
▼ Start the Web-launched SL Conso
Page 435 and 436:
▼ Update the Web-launched SL Cons
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Common Problems and Solutions The W
Page 443 and 444:
Common Problems and Solutions 4. In
Page 445 and 446:
Index A activated capacity 87-92 ce
Page 447 and 448:
dWWN 217 dynamic World Wide Naming.
Page 449 and 450:
Service Required indicator 13 Servi
show all

StorageTek SL500 User's Guide - Downloads - Oracle

Create successful ePaper yourself

Delete template?

Save as template?