Pedal Boat Owner's Manual - Future Beach
Pedal Boat Owner's Manual - Future Beach
Pedal Boat Owner's Manual - Future Beach
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Assembly Instructions for Bimini Sun Shades<br />
WB Series and Equinox Series<br />
C1<br />
Hollow<br />
Chrome<br />
Sleeves<br />
Nylon Bag<br />
Your Bimini Sun Shade arrives preassembled in a nylon bag.<br />
Two separate fiberglass support rods are included in the bag.<br />
C2<br />
C3<br />
C4<br />
14<br />
Loose Aluminum Sleeves<br />
Hollow<br />
Chrome Sleeves<br />
Fiberglass Support Rods<br />
Loose Aluminum<br />
Sleeves. This<br />
end into front of<br />
pedal boat<br />
Remove the Bimini Sun Shade from<br />
the nylon bag. Unfold preassembled<br />
Bimini Sun Shade. Attach the rod on<br />
the back of the Bimini Sun Shade to<br />
the molded connector on the side of<br />
the rod. Repeat this procedure at the<br />
other back corner.<br />
Insert the fiberglass support rods<br />
into metal tubes in the front of your<br />
pedal boat with the hollow chrome<br />
sleeves directed upwards. Push<br />
these rods firmly down in the pedal<br />
boat into the metal tubes.<br />
Now insert the assembled Bimini<br />
Sun Shades into the hollow chrome<br />
sleeves of the fiberglass support<br />
rods.
Change language