Service Manual - Burner Components - Danfoss

Accessories
EBI service packs
Accessory set 052F0061
2 ignition cables with ∅4 mm electrode plugs
2 x ∅4 mm electrode plugs
2 x ∅6.35 mm electrode plugs
2 x M4 screws
2 x M5 screws
2 x 4.2 mm self-tapping screws
1 x double-sided adhesive pad
Ignition transformers/units
The EBI accessory set
052F0061 is used, for
example, when replacing a
Danfoss type 52L ignition
transformer or another
make.
In addition to the highvoltage
cables and
electrode plugs, the
accessory set also
contains an assortment of
screws. When fitting EBI
only one screw and the
double-sided adhesive pad
are necessary. EBI can
thus be used in most
existing installations
without it being necessary
to drill new holes in the
burner.
EBI accessory set
052F0063 contains an EBI
(052F0030) with primary
cable (052F0102) and
accessory set 052F0061.
72