Service Manual - Burner Components - Danfoss
Service Manual - Burner Components - Danfoss
Service Manual - Burner Components - Danfoss
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nozzle markings<br />
Marking on CEN nozzles<br />
The new CEN marking applies to the CEN<br />
definition point and nozzles are marked EN<br />
(European standard):<br />
The nozzle capacity in kg/h is measured at an<br />
atomising pressure of 1000 kPa (x10 -2 bar)<br />
using a test oil with a viscosity of 3.4 mm 2 /s<br />
and a density of 840 kg/m 3 .<br />
Data as per the Internal Previous<br />
CEN standard production nozzle<br />
code designation<br />
Oil nozzles<br />
Marking on standard nozzles<br />
The marking on standard nozzles gives the<br />
capacity in USgal/h, the spray pattern and<br />
spray angle at 700 kPa (x10 -2 bar) using a<br />
test oil with a viscosity of 3.4 mm 2 /s and a<br />
density of 820 kg/m 3 .<br />
86