Service Manual - Burner Components - Danfoss

OD series oil nozzles - conversion
By far the most application requirements are
met with only three basic types (S-H-B).
S = solid atomising pattern
H = hollow atomising pattern
B = semi-solid atomising pattern
The nozzles are available with four different
spray angles:
30°, 45°, 60° and 80°.
Danfoss oil nozzles cover capacities from
1.25 kg/h to 110 kg/h. (0.40 USgal/h to
35 USgal/h)
Note:
Danfoss oil nozzles are available with the
following filters:
Capacity range
0.40 to 0.45 USgal/h
45 µm sinterbronze filter
Capacity range
0.50 to 1.00 USgal/h
75 µm sinterbronze filter
Capacity range
1.10 to 1.35 USgal/h
120 µm sinterbronze filter
Capacity range
1.50 to 11.00 USgal/h
140 µm monel mesh filter
Capacity range
12.0 USgal/h and above,
without filter
Oil nozzles
Type
OD-S
Type
OD-H
Type
OD-B
83