Air Filters

Thermal Insulation (459) T-Max / Polyester insulation layer faced on one side with
aluminium foil
Thermal Insulation (460) Phenotherm TM / Phenotherm TM phenolic foam / A
composite insulation panel comprising a phenolic foam
core having a density of 60 kg/m 3 bonded on both sides
with embossed aluminium foil of a thickness > or = 0.05
mm using PAL LA811 adhesive
Thermal Insulation (471) "OPS" Rigid Insulation Ring / Split composite insulation ring
comprising rigid fire retarded polyurethane, laminated with
0.3 mm thick double-sided aluminium foil as vapour barrier
and protected by 0.8 mm thick galvanized iron sheet jacket
Thermal Insulation (472) "UniFiber R " Fiberglass with Black Glass Tissue (BGT)
Facing / Fiberglass faced on one side with black glass
tissue / 25 mm / 32 Kg/m 3
Thermal Insulation (474) Pilon "Thermobreak" Thermal Insulation / A closed cell
polyethylene foam insulation material with a reference
colour of (black) charcoal grey, in roll or sheet form.
Reinforced with aluminium foil facing on one side and G60
acrylic PAS adhesive backing.
Acoustic insulation (476) "Pyrotek" Wavebar Quadzero Noise Barrier/A 4mm thick
black flexible aluminium foil faced polymer backed by a
white nonwoven polyester fabric/8.14kg/m 2 /for external
acoustic insulation of duckwork
Thermal Insulation (479) "Teembase" Pre-insulated Pipe System / Piping system
comprising a basic carrier pipe, a metal outer jacket of
minimum 0.6 mm thick stainless steel (Grade 304),
galvanized steel or aluminium sheet and an insulation of 15
VENTILATION DIVISION OF FIRE SERVICES DEPARTMENT
LIST OF ACCEPTED MATERIALS FOR USE IN VENTILATION / FIRE SERVICE RELATED SYSTEMS
- 75 mm thick polyurethane foam (48 kg/m 3 ) machineinjected
between the carrier pipe and outer jacket.
Thermal Insulation (482) "GOODEVER PF" Phenolic Foam Insulation / Phenolic
foam insulation with a density of 40 kg/m 3 bonded on one
side with 0.22 mm "S-series" thick doubled sided aluminum
facing material using PS 8109S adhesive / thickness: 15
mm - 75 mm
Hueintek Inc., S. Korea 27/8/2010 August 2013 No assessment was made on the
density and toxicity of smoke
generated by the material under fire
condition..
Dongguan Juwun Rubber & Plastic
Products Co., Ltd., PRC
27/8/2010 August 2015 No assessment was made on the
density and toxicity of smoke
generated by the material under fire
condition..
Oxprime (International) Ltd., PRC 11/10/2010 October 2013 no assessment was made on the
density and toxicity of smoke
generated by the material under fire
UniFiber Manufacturing Ltd., PRC 18/10/2010 October 2013 no assessment was made on the
density and toxicity of smoke
generated by the material under fire
condition.
Sekisui Pilon Pty. Ltd., Australia 10/11/2010 September 2013 Test of the material for smoke
generation according to ISO 5659-2
(1994) under fire condition was carried
out by SP Swedish National Testing
and Research Institute with test report
referance P200245 dated 13.2.2002
as a reference.
Pyrotek Pty. Ltd., Australia 6/12/2010 December 2013 no assessment was made on the
density and toxicity of smoke
generated by the material under fire
condition.
Teembase Development Limited,
PRC
Shenzhen Goodever Xinxing
Building Material Co., Ltd., PRC
14/12/2010 December 2013 a) No assessment was made on the
density and toxicity of smoke
generated by the assembly under fire.
b) A valid assessment report on the
wall penetration seal shall be
maintained.
23/12/2010 September 2015 no assessment was made on the
density and toxicity of smoke
generated by the material under fire.
page30/40