Air Filters

TYPE 

(1) Air Filters 

BRAND NAME / MODELS / DESCRIPTION MANUFACTURER ACCEPTANCE 

DATE 

DATE TO REVIEW Remarks 

Carbon Filter CHEMOX and Activated Carbon filter media Sparks Technology, Inc., USA 20/9/2003 September 2013 

Air Filter(206) " Purolator" Air Filter Unit 

Throw away, dry type : 

a) SERVA-cell; b) hi-E 40; c) Mark 7 

Replaceable media type: a) SERVA-pak 

Air Filter(208) "FLECO" Air Filter Units Model: 

a) Pleated Filter 

b) Pocket Filter 

c) Septara 

Air Filter(260) "Camfil Farr" Air Filter - Throw away, dry type Model: 

a) Aeropleat IV; 

b) Aeropleat IV+; 

c) Aeropleat III; 

Air Filter(262) "Purafil" Chemical Air Filter - Dry type filter media: a) 

Chemisorbant media; b) Select CP Blend media; c) Select 

media; d) CP Blend media; e) SP media; f) SP Blend 

media; g) Triple Blend media; h) Puracarb media & i) 

Purakol II media. Item (a) to (i) above are to be factoryfilled 

into the following models: a) PK-18; b) CK-12/24 & c) 

PM-18 Dry air filter unit- Purafilter 

Air Filter(276) "CLEANCEL" Air Filters 

Model : "MCC-7524", "MCC-7536" and "MCC-7548" 

a) "CLEANCEL" mini pleat HEPA filter, max. 3-1/8 in. 

depth. 

Air Filter (290) "Dust Free" Throw Away Type Air Filter 

a) Bag Filter: DFSB-65, DFSB-85 & DFSB-95 

b) Cartridge Filter: DFC-65, DFC-85 & DFC-95 

Air Filter (289) "Glasfloss" Throw Away Type Air Filter 

a) "Z-line" Series "SB", "ZL","HV","MR8","MR11" and 

Carbotron", max. thickness 8 in. 

b) "Excel", "Purapack", max. dep 

Air Filter (315) AAF "AmAir C" Air Filters, Model: "AmAir C" throw-away 

dry type panel filter 

Air Filter (320) "Visko-Aire" Polyester Filter Media, 

Model : 

a) Dry Type Media, Roll Media, Untreated 

b) Adhesive Coated Media, Roll Media, Tackified 

c) Dry Type Media, R-70 Media 

d) Dry Type Media, R-80 Media 

VENTILATION DIVISION OF FIRE SERVICES DEPARTMENT 

LIST OF ACCEPTED MATERIALS FOR USE IN VENTILATION / FIRE SERVICE RELATED SYSTEMS 

Purolator Products Air Filtration Co. 

USA 

Kunshan Fleco Filtration Co. Ltd., 

P.R.C. 

Camfil Farr Group, Malaysia and 

PRC 

11/5/2007 May 2012 UL File No. AJZV.R4138 

Test Standard: UL 900 

30/5/2007 May 2012 

14/3/2008 March 2012 

Purafil Inc., USA 17/3/2008 March 2012 The filter media and filter modules 

shall both be UL listed and bear the 

suitable UL Marking as appropriate. 

Clean Tech Korea Co. Ltd., S. 

Korea 

Shen Zhen Dust Free Mfg. Limited, 

PRC 

19/5/2008 May 2013 

3/7/2008 July 2013 Class 1 or 2, as listed in UL 900 

Certificates. 

Glassfloss industries Inc., USA 3/7/2008 July 2013 Class 1 or 2, as listed in UL 900 

Certificates. 

AAF International, Louisville, USA 19/9/2008 Sept 2013 The filte shall remain UL listed and 

bear the appropriate UL mark 

Viskon-Aire Corporatio, USA 14/10/2008 Oct 2013 The filter shall be UL listed and bear 

the appropriate UL marking. 

page1/40



Air Filter (328) "Wendell" Filter Fabric 

Model: Washable dry type media, 0.125" thick 

a) AM5491-21 

b) NZ4981-21 

Wendell Fabrics Corp., USA 31/10/2008 Oct 2013 

Air Filter (331) "AAF"5700 Disposable Panel Type Air Filter 

Model: 5700 Disposable Panel Type, 1" and 2" thick 

AAF International, Louisville, USA 17/11/2008 November 2013 

Air Filter (332) "AAF" Frontline Air Filter 

Throw-away dry-type or adhesive coated pads or rolls, max. 

2.0" thick 

a) Frontline Gold 

b) Frontline Blue, Type S and Type FG 

c) Frontline Green, Type S and FG 

AAF International, Louisville, USA 15/12/2008 December 2013 

Air Filter Media (339) "Viskon" 

Model: AJZV.R4937 

"Drico BGD" throw-away, adhesive coated fiber glass air 

filter pads and roll media, max 

Air Filter (340) Camfil Farr / Megalam Panel Filter - Throw-away, dry type 

air filter units/ Maximum 10 in depth, AJZV.R14563 

Frontline Air Filter (341) Goldmine / Dry-type, throw-away air filter unit 

a) "Pleated Panel Series", maximum depth 4 in. 

b) "Multi-Pocket Series", maximum depth 24 in. / 

AJZV.R26138 

Air Filter Units (342) AAF / Throw-away, dry type air filter units: 

a) "Biocel", max. 12 in. thick 

b) "Astrocel I HCX", max. depth 111/2 in. 

c) "AmAir 200E", 2 & 4 in. thick 

Air Filter Pads (363) Clarcor "Streamline - P, D1 and AM" Series Air Filter Pads / 

Throw away, dry type: 

a) Streamline - P, b) Streamline - DL, c) Streamline - AM 

/ Thickness : Max. 2 inches 

Air Filter Units (365) Purolator / Throw away, dry type : Defiant Mark 80-D / 

Thickness ; As listed in UL Certifications Directory 

AJZV.R4138 

Air Filter Units (370) Flanders-Precisionaire / Throw away, dry type 

a) Pre Pleat 40, b) Pre Pleat 62R, c) Alpha Cell, d) 

Precision Cell, e) Alpha Panel and Throw away, bag type 

f) Precision Pak 

Air Filter (389) Camfil Farr / Throw-away, dry type filter units AP-Eleven 

and AP-Thirteen / 1, 2 and 4 in, AJZV.R2872 

Air Filter Unit (390) JCL / CF-250 / Dry type cylindrical shaped filter unit (150 

mm dia., 250 mm long) comprising a Grade 304 stainless 

steel frame and mesh filled with zeolite (2 kg) as the 

filtering medium 

Viskon-Aire Corporatio, USA 2/1/2009 January 2014 the filter shall be UL listed and bear 


Camfil Farr Group, Malaysia, PRC 

and USA 

Goldmine Company Ltd., Hong 

Kong 

23/1/2009 January 2014 the units shall be UL listed and bear 

the appropriate UL Marking 

23/1/2009 January 2014 the filters shall remain UL listed and 

bear the appropriate identification 

markings 

AAF International, USA 29/1/2009 January 2014 the filters shall remain UL listed and 


markings 

Clarcor Air Filtration Products, USA 29/4/2009 April 2014 the units shall be UL listed and bear 


Purolator Products Air Filtration Co. 

USA 

4/5/2009 May 2014 the units shall be UL listed and bear 


Flanders-Precisionaire Inc., USA 9/6/2009 June 2014 the units shall be UL listed and bear 

the appropriate identification Marking 

Camfill Farr Group, Malaysia and 

PRC 

4/8/2009 August 2014 The unit shall be UL listed and bear 

the appropriate UL Marking. 

JCL Engineering Ltd., Hong Kong 12/8/2009 August 2012 The filter unit shall bear an appropriate 

product label. 

page2/40

Air Filter (391) Goldmine / Dry-type, throw-away air filter unit 

a) "Separator Gold Series", maximum depth 12 in. 

Dry-type, throw-away air filter unit, pad and roll media 

b) "HD Synthetic Media Series", maximum depth 2 in. 

/ AJZV.R26138 

Air filter units (407) FLECO / a) Separator HEPA Filter - maximum 12 in. depth 

b) Pleated Filter - maximum 5 in. depth c) Mini-Pleated 

Panel - maximum 2.75 in. depth / UL File No. : 

AJZV.R22353 and Test Standard : UL 900 - Determination 

of the combustibility and the amount of smoke generated 

for air filter units and Test Result : Class 2 as listed in the 

UL certificates 

Photocatalysis Autibacterial 

Metal Foam Filter (413) 




Kong 

Kunshan Fleco Filtration Co. Ltd., 

P.R.C. 

APOGEE / ZA002 / A 50 mm thick spongy looking Shunde Canafull Industry Co. Ltd., 

washable foam metal filter media having a void ratio of over 

95% 

China 

Air Filter Units (418) Flanders-Precisionaire / Dry type, pleated HEPA filter units 

up to 12 in. depth*: 

a) Alpha 95, b) Alpha Cell, c) Alpha 2000, d) Alpha HT, e) 

Dimple Pleat 

Air Filter (419) Hencolin (Taiwan) / Dry-type, throw-away air filter unit, 

a) "Extended Surface Filter" maximun depth 4 in. 

b) "Synthetic Bag Filter", maximun depth 36 in. / UL 900 - 

Determination of the combustibility and the amount of 

smoke generated for air filter units 

2/9/2009 September 2014 the filters shall remain UL listed and 


markings 

15/1/2010 January 2014 This units shall be UL listed and bear 


4/3/2010 March 2012 No assessment was made on the 

density and toxicity of smoke 

generated by the material under fire 

Flanders-Precisionaire Inc., USA 15/4/2010 April 2015 The units shall be UL listed and bear 

the appropriate identification markings 

Hencolin International Corporation, 

Taiwan 

Air Filter (420) Camfil Farr / a) C-Flo, b) Superpac / Camfil Farr Group, Malaysia and 

PRC 

Air Filter (421) Camfil Farr / a) Opakfil, b) Airopac, & c) Airopac Green / Camfil Farr Group, Malaysia and 

PRC 

Air Filter (422) Camfil Farr / a) Ecopleat Green, b) TCPA together with 

RFM housing / 


PRC 

Air Filter (423) Camfil Farr / a) C-Pleat - 1", 2" & 4", b) CFP-KW - 46 mm / Camfil Farr Group, Malaysia and 

PRC 

Air Filter (436) Hencolin (Taiwan) / Dry-type, throw-away air filter unit, 

a) "HEPA Separator Filter" maximun depth 12 in. 

b) "ASHRAE Separator Filter", maximun depth 12 in. / UL 

900 - Determination of the combustibility and the amount of 

smoke generated for air filter units 


Taiwan 

20/4/2010 April 2015 The filters shall remain UL listed and 


markings. 

This letter supersedes our previous 

one of the same series dated 

1.12.2009 on the same products. 

26/4/2010 April 2015 Nil 

26/4/2010 April 2015 Nil 

26/4/2010 April 2015 Nil 

26/4/2010 April 2015 Nil 

4/6/2010 June 2015 The filters shall remain UL listed and 


markings 

page3/40

Air Filter (451) AAF / Dry type air filter units for filling with SAAF Carb and 

SAAF Oxidant filter media: a) SAAF Medium Duty 

Cassette b) SAAF Heavy Duty Cassette c) SAAF 

Commercial Grade Cassette: Replaceable filter medium 

a) SAAF Carb b) SAAF Oxidant c) SAAF Carb MA d) 

SAAF Carb MB e) SAAF Carb MC f) SAAF Carb MA-HT 



Air Filter (453) Nitta / Throw-away dry-type air filter units designated as a) Taiwan Nitta Filter Co., Ltd., 

33XX-XX, 34XX-XX, 35XX-XX, 36XX-XX, 38XX-XX, 39XX- 

XX, maximum depth 4 3/4 in. B) 15XX-XX, maximum depth 

11 3/4 in. ("XX-XX" denotes efficiency and frame 

dimensions) 

Taiwan 

Air Filter (455) Goldmine / a) Dry-type, throw-away air filter unit, 

"Separator Gold Series", maximum depth 12 in. B) Drytype, 

throw-away air filter unit, pad and roll media, "HD 

Synthetic Media Series", maximum depth 2 in. 

Air Filter (462) Airguard / Throw-away, dry type filter units (from Malaysia) 

a) "Clean Pak" Series - CP5, CP6, CP8 and CP9; max. 

depth 36 in. b) "VSC" Series; max. depth 14 in. 

Replaceable media, adhesive coated air filter pads or rolls 

(from USA) c) "AGFG" 

Filter (468) "AAF" AmerTex R-Series Filter / AmerTex R15, R29 and 

R50 Series 

Air Filter (469) Dust Free "Dust Fighter 95" / Washable dry type air filter 

unit Dust Fighter 95, thickness 1" and 2" 

Air Filter (493) Purafil "Purafilter" Air Filter / Purafilter / Air filter with either 

paperboard or metal frame and factory-filled with SPB- 

500/30 filter medium Dimension 24" x 24" with thicknesses 

of 2", 4" or 12" 

Air Filter (498) Filtration Group "Auto Roll Filter" Air Filter / Auto Roll Filter - 

adhesive coated, throw away type / Maximum 2 in. depth 

Air Filter (510) "Hencolin" (Taiwan) Air Filter / Dry-type, throw-away air 

filter unit "HEPA Mini-Pleat Filter", maximum depth 3 in. / 

UL File Number AJZV.R26150 

AAF International, Louisville, USA 28/7/2010 July 2015 The filter units and medium shall be 

UL listed and bear the appropriate UL 

mark. 


Kong 

Clarcor Air Filtration Products Inc., 

USA and Malaysia 

AAF International, Louisville, USA 28/9/2010 September 2015 

28/7/2010 July 2015 The filters shall remain UL listed and 

bear the appropriate identifications 

markings 

2/9/2009 September 2014 The filters shall remain UL listed and 


markings. 

2/9/2010 September 2015 the units shall be UL listed and bear 


Dust Free Inc., Royse City, USA 28/9/2010 September 2015 The units shall be UL listed and bear 

the appropriate identification markings 

Purafil Inc., USA 1/2/2011 February 2016 The filter is to be marked with the 

manufacturer's name, country of 

origin, model name and the standard 

to which it has been tested. 

Filtration Group Inc., USA 24/2/2011 February 2016 a) The filter shall remain UL listed. b) 

Suitable documentation, e.g. delivery 

order, detailing the following should be 

kept by users of this filter for 

inspection upon request: i) 

Manufacturer's name; ii) Place of 

manufacture; iii) Model number; and 

iv) The standard to which the filter has 

been type-tested. 


Taiwan 

12/4/2011 April 2016 The filters shall remain UL listed and 


markings. 

page4/40

Air Filter Units (512) Purolator "Key Pleat" Air Filter Units / Throw away, dry type 

air filter unit "Key Pleat" / Thickness : As listed in UL 

Certifications Directory AJZV.R5891 

Air Filter (535) "Welaire" AC Series Air Filter / AC Series / TiO2 filter wwith 

aluminium frame utilizing photocatalyst material a) UP-102 

(A 2 mm thick nickel three dimensional structure alloy 

material) or b) UP-315 (A 13 mm thick aluminium 

honeycomb structure material) 

Air Filter (537) "AAF" Air Filter Units / Throw-away, dry type: a) AmAir 100, 

AmAir 200, AmAir 300 and AmAir 500 b) VariCel, Varicel II 

c) AstroCel I, AstroCel II, AstroCel TM Electrically operated 

roll-away type: d) Roll-O-matic Throw-away, dry type, 

automatic roll filter media: e) Roll-O-Mat Throw-away, 

extended area, dry type: f) DriPak 2000 



Clarcor Air Filtration Products Inc., 

USA 

Zhongshan Saiver Welaire Airconditioning 

Equipment Co., Ltd., 

PRC 

12/4/2011 April 2016 The units shall be UL listed and bear 


2/8/2011 August 2016 

AAF International, Louisville, USA 10/8/2011 August 2016 The filters shall remain UL listed and 

bear the appropriate idenification 

markings. 

Air Filter (538) Camfil Farr "C-Flo" Air Filter Unit / "C-Flo" Camfil Farr Group, PRC 11/8/2011 August 2016 This letter supersedes our assessment 

made on the same filter model given 

under our letter of the same series 

dated 26.4.2010. 

Air Filter (540) "AAF" Air Filter Units / Throw-away, dry type: a) AmAir 

1100 (max. depth 4 3/8 in.) b) AmAir 1300 (max. depth 4 

in.) 

Air Filter Units (549) "AAF" Air Filter Units / Throw-away dry type, maximum 

depth 12 in. a)VariCel V-70. -80, -95in.) b) VariCel V 

MER15 

Air Filter (582) "Camfil Farr" Air Filters / Throw away, dry-type: a) 

Aeropleat IV b) Aeropleat IV+ c) Aeropleat III d) Type 30/30 

e) Riga-Flo 

Air Filter (583) "Purafil" Chemical Air Filters / Dry-type replaceable filter 

media: a) Chemisorbant media b) Select CP Blend media 

c) Select media d) Select Chemisorbant media e) SP media 

f) SP Blend media g) Triple Blend media h) Puracarb media 

i) Purakol II media j) Puracarb AM media 

Air Filter(585) "Permatron" Air Filter - Waqshable unit, dry type: 

a) DustEater Easy Flow; 

b) Lifestyle Plus MF and Lifestyle Plus LR 

Air Filter(586) "AIRCLEAN / CH1093" Medium Efficiency Filter Cotton / 

"AIRCLEAN / CH1093" polyester fibre of thickness 18mm 

and density of 350g/m 2 / Filter frame: Aluminium 

AAF International, Louisville, USA 15/8/2011 August 2016 The filters shall remain UL listed and 


markings. 

AAF International, Louisville, USA 21/9/2011 September 2016 The filters shall remain UL listed and 


markings. 


PRC 

6/6/2012 June 2017 The filter units shall remain UL listed 

and bear the appropriate UL marking. 

Purafil Inc., USA 7/6/2012 June 2017 The filter media and filter modules 

shall both remain UL listed and bear 


Permatron Corp., USA 21/6/2012 June 2017 The Units shall be UL listed and bear 


Chan's Industrial Company, PRC 19/6/2012 June 2015 a) Filter frames/retainers not testes 

and shall be of full metallic 

construction. b) All filter cells shall be 

marked with the information required 

in Clause 6.5.1, Part VI of FSD 

Circular Letter No. 4/96. 

page5/40



Air Filter(614) "Phototroph" Photocatalytic Extruded Ceramic Filter / 

PECF200 

Zeta Coating Hong Kong Ltd., PRC 12/11/2012 November 2017 

Air Filter(615) "Camfil Farr" Air Filters / Filter Model: --Throw away, dry 

type a) Absolute --Replacable media, adhesive coated a) 

Hi-Cap --Replacable media, dry type a) Hi-Flo / Thickness: 

As listed in UL Certification Directory 


PRC 

23/11/2012 November 2017 The units shall be UL listed and bear 


Air Filter(618) "Permatron" Air Filter / "Dust Eater" electrostatic filter Permatron Corp., USA 11/12/2012 December 2017 The filter unit shall be UL listed and 

bear the appropriate UL Marking. 

Air Filter(620) :NCCO" Nano Air Filter Unit / NF 1001 /Dry type panel filter 

unit (300 mm - 600mm(L) x 300 - 600 mm (W) x 20 - 36 

mm (Th.)) comprising a galvanized steel frame filled with 

"nano" material (zeolite) as the filtering medium 

Air Filter(622) "Camfil Farr" Fiberglass Air Filter Unit / "Camfil Farr" 

Fiberglass Filter 

Air Filter(627) "AAF" Air Filter Units / Throw-away dry type, maximum 

depth 12 in. a)VariCel V-70. -80, -95in.) b) VariCel III 

(2) Air Handling Equipment 

Air Handling Equipment ZEMAC - Sound Attenuator used in Combined Ventilation 

and Smoke Extraction System 

RHT Limited, Hong Kong 18/12/2012 December 2017 The filter unit shall bear an appropriate 

product label 

Camfil Farr Group, PRC or 

Malaysia 

21/12/2012 December 2017 

AAF International, Louisville, USA 3/1/2013 January 2018 The filters shall remain UL listed and 


markings. 

ZEMAC Engineering Co. Ltd., 

Hong Kong (Formly known as 

CEMAC Engineering Co. Ltd.,) 

26/3/2003 January 2012 

page6/40



Variable Air Volume Box (367) "RSVAV" / Series TU, Series FP, Series UF / 

Royal Service Air Conditioning 

13/5/2009 May 2014 

1) Series TU - The basic unit casing is of galvanized steel 

sheet construction internally lined with fibreglass / 

elastomeric insulation. All control devices and components 

are enclosed in a galvanized steel enclosure external to the 

air stream., 

2) Series FP - The basic unit casing is of galvanized steel 

sheet construction internally lined with fibreglass / 

elastomeric insulation. The unit incorporates a fan-motor 

assembly comprising a galvanized steel fan wheel and 

housing and a totally enclosed single phase motor. All 

control devices and components are enclosed in a 

galvanized steel enclosure external to the air stream, 

3) Series UF - The basic unit casing is of steel construction 

internally lined with elastomeric insulation. All control 

devices and components are enclosed in a galvanized steel 

enclosure shielded from the air stream. Air grille fitted to the 

unit is of extruded aluminium. For fan-powered units, it 

incorporates a fan-motor assembly comprising a galvanized 

steel fan wheel and housing and a totally enclosed aingle 

phase motor. 

(Guangdong) Corp., PRC 

Variable Volume Box (490) TROX "TVB" Variable Volume Box / Series TVB / All 

metallic construction with galvanized steel sheet casing 

which is lined internally with 25 mm thick glass wool 

insulation. All control devices and components are housed 

in a galvanized steel enclosure and shielded from the air 

stream. Insulation material is glass wool insulation board, 

("Polyglass polywool Ductliner", Malaysia) of density 32 

Kg/m 3 and is in compliance with BS 476 Part 6: 1989 

(Overall Performance I ≦ 12, Sub-index i 1 ≦ 6) and BS 

476 Part 7: 1997(Class 1) All non-metallic components are 

in compliance V0 or V2 flammability class when tested to 

UL 94 and UL listed. 

Variable Air Volume Box (545) "SUN" Variable Air Volume Box / Series VAV-5000 and 

Series VAV-50E1 

TROX Malaysia Sdn. Bhd., 

Malaysia 

SUNRISE Air-conditioning 

Equipment Ltd., PRC 

27/1/2011 January 2016 

7/9/2011 September 2016 

page7/40

Air Handling Equipment (613) "VibrAcoustics® RLC" Rectangular Sound Attenuator / 

Construction: The casing and splitter nose are constructed 

from 0.8mm to 1.2mm thick galvanized steel sheet. The 

splitter body is fabricated from 0.55mm to 0.8mm thick 

galvanized perforated steel sheet with "Thermawool KT/CT 

32 Glasswool" or "Thermawool KT/CT 48 Glasswool" Fibre 

Glasswool of density 32 or 48kg/m 3 packed as the infill 

material. 



Zhongshan Sanbe Metal Acoustics 

Limited, PRC 

(3) Smoke Control Componects ( Ventilator / Fire Rated Duct/ Smoke Curtain ) 

Fire Rated Duct Prefabricated "Durasteel 3DF2" panel comprising a 

cementitious core with perforated galvanized steel facing 

on both side 

Fire Rated Duct Rectangular duct fabricated from a single layer of 9.5mm 

thick "Durasteel 3DF2" panel comprising a cementitious 

core with perforated galvanized steel, 0.5mm thick, facing 

on both side (Horizontal duct system only) 

Intumex Asia pacific Pte. Ltd. 18/1/2008 January 2013 

Intumex Asia pacific Pte. Ltd., U.K. 20/3/2008 October 2012 

Smoke Curtain (271) Gelec "GIKI" automatic smoke curtains BLE Smoke and Fire Curtains Ltd., 

UK 

15/4/2008 April 2012 

Actuator (284) "Simon RWA EA-KL800/600" Simon RWA GmbH, Germany 17/6/2008 June 2012 

Fire Rated Duct (334) "Promatect-S" 6mm Fire Resistant Board for the Cladding 

of Steel Ventilation and Smoke Extraction Ductwork 

Fire Rated Duct (336) "Flamebar B.W. II" Fire Duct and Fire Enclosure System 

A steel duct system of proprietary design and construction, 

with a spray of "Flammebar B.W.11" fire proofing for fire 

protection and "Rockwool" mineral wool for thermal 

insulation. 

Promat International (Asia Pacific) 

Ltd. 

Fire Spray International Ltd. 16/12/2008 April 2013 

31/10/2012 November 2017 a) Other glasswool infill materials of 

the attenuator other than those tested 

as specified above and all 

seals/gaskets (if any) shall conform to 

the requirements for internal insulation 

stipulated in Part XI of the FSD 

Circular Letter No. 4/96. b) No 

assessment was made on the density 

and toxicity of smoke generated by the 

glasswool infill material under fire. 

12/12/2008 February 2012 The system only meets the minimum 

requirement of 30 min insulation for 

smoke extraction system and is not 

suitable for use in situation where 

higher insulation criteria are specified. 

page8/40

Fire Rated Duct (392) Promatect-H 15 mm / A galvanized steel sheet ducting 

system, protected by "Promatect-H" boards of 15 mm thick 

and stone mineral wool of thickness 50 mm and density 

100 kg/m 3 , as detailed in the assessment report. The steel 

duct mustb be constructed in accordance with the 

requirements of DW/144 "Specification for sheet metal 

ductwork: low, medium and high pressure/velocity air 

systems" with Pittsburgh lock longitudinal seams and steel 

angle cross joints. Maxium Duct size: 6,000 mm (W) x 

2,500 mm (H) Internal 



Promat International (Asia Pacific) 

Ltd. 

Fire Rated Duct (429) Promatect-S 9.5 mm / 10 m (W) x 4.0m (H) / A ducting Promat International (Asia Pacific) 

system comprising "Promatect-S 9.5 mm thick steel faced 

fibre reinforced cement boards fixed on a framework of 50 x 

50 x 3 mm thick steel channels with a dedicated hanger 

support systems 

Ltd. 

Static Smoke Ventilators (405) "Ventibay" & "Ventilight" / EC Certificate of Conformity No.: 

336-CPD-10430 

Static Smoke Ventilators (406) "Certilam" & "Certilux" / sizes as indicated in the annex to 

EC Certificate of Conformity No.: 336-CPD-6742-1 dated 

17.7.2007 issued by TNO Certification B.V., the 

Netherlands 

Static Smoke Ventilators (410) Exubay / Size as indicated in the annexes to EC Certificate 

of Conformity No.: 336-CPD-6742-3 / i) The ventilator is 

keep closed by an electromagnetic lock / compressed air 

and forced to open by a mechanical spring when the 

electricity / air supply is cut off; ii) The ventilator is of fail 

safe design. It will be opened automatically when there is 

failure in electricity / compressed air supply, control cable 

or control panel; iii) A manual switch is provided which shall 

be overridden by fire alarm signal 

Fire Rated Duct (466) "Vermiduct" System / a) The ductwork of "Vermiduct" 

system is constructed of galvanized steel or sheet metal to 

DW/144 of wall thickness not less than 0.8mm. b) The 

thickness of "Vermiduct" spray may vary from 12mm to 

65mm depending on the orientation, duct size and fire 

rating. 

2/9/2009 August 2013 The system should be designed and 

installed in compliance with the details 

of construction, penetration seals, 

support hangers and duct joint 

sealants as started in the assessment 

report. Installation data should be 

made available on request for 

ventilation. 

30/4/2010 July 2014 No assessment was made on the fire 

rating of the ductwork system in 

accordance with the insulation crterion 

of BS 476: Part 24 : 1987., This letter 

supersedes our previous one of the 

same series dated 11.2.2009 on the 

same product. 

Souchier, France 7/1/2010 June 2014 A valid "EC - Certificate of Conformity" 

shall be maintained 

Souchier, France 14/1/2010 January 2014 A valid "EC - Certificate of Conformity" 


Souchier, France 25/1/2010 January 2014 A valid "EC - Certificate of Conformity" 


L & A Fazzini Manufacturing Pty 

Ltd., Australia 

17/9/2010 March 2014 a) all design, fabrication and 

installation of the "Vermiduct" duct 

system shall be carried out by 

manufacturer approved applicators. b) 

Applicators must hold a valid L & A 

Fazzini Manufacturing Pty Ltd. 

Applicator License. 

page9/40

Static Smoke Ventilators (477) Hexadome "Hexasteel" & "Hexacoif" Static Smoke 

Ventilators for Natural Venting of Staircase/a) Hexasteel b) 

Hexacoif (As indicated in the annex to EC Certificate of 

Conformity No.:0333-CPD-219003) 



Fire Rated Duct (491) "WinDuct" Fire Resistant Coated Ductwork System / a) Passive Fire Protection Sdn., Bhd., 

Ductwork is constructed of galvanized steel sheet in 1,200 

mm long section to DW/144 of thickness 1.0 mm. b) A 

layer of spray or brush/roller applied "Winduct" intumescent 

water based fire prevention coating, minimum 0.6 mm thick. 

Malaysia 

Fire Rated Duct (495) FireMaster FastWrap XL / no model / FireMaster FastWrap 

XL is a fully foil encapsulated Thermal Ceramics patented 

Superwool® fibre (an alkaline-earth silicate wool) with a 

nominal density of 96 kg/m 3 and thickness of either 38 mm 

. 

Smoke Ventilators (499) "Brakel" Smoke Ventilators for Static Smoke Extraction 

System / a) Eura and Eura-R; b) Duo Therma 

Automatic Smoke Curtain (533) "BLE" (UK) SD60 Automatic Smoke Curtain / SD 60 / A 

woven glass referenced "X32K" incorporating a 

polyurethane coating with aluminium pigments on both 

faces; the fabric has an overall weight of 455 g/m 2 and a 

thickness of 0.43 mm as described in report WFRC No. 

C131932 of 29.5.2003 by Warrington Fire Research Centre. 

Hexadome, France 6/12/2010 December 2015 A valid "EC-Certificate of Conformity" 

shall be maintained. 

Thermal Ceramics UK Ltd., United 

Kingdom 

1/2/2011 September 2015 a) Installation of the fire rated duct 

system shall be carried out by 

Dekkons Ltd. (who shall be holding a 

valid authorization issued by Passive 

Fire Protection Sdn., Bhd., Malaysia) 

or his authorized representatives. b) A 

letter shall be issued by Dekkons Ltd. 

to certify the quality of every 

completed "WinDuct" fire resistant 

coated ductwork system. c) Valid test 

reports and assessment reports as 

listed above shall be made available 

upon request. 

14/2/2011 March 2015 Nil 

Brakel Aluminium b.v., U.K. 24/2/2011 February 2016 A valid "EC-Certificate of Conformity" 

shall be maintained. 

BLE Smoke and Fire Curtains Ltd., 

UK 

11/7/2011 July 2014 All test reports mentioned above shall 

maintain their validity through relevant 

review reports. 

page10/40

Actuator (541) "SE Controls" Window Actuator for Static Smoke Vents / a) 

SELA N 24R b) SEPO 50 c) SELA N 24G d) SECO N24 

Fire Rated Duct (621) Caswell "Firesafe" Ductwork System / A rectangular or 

circular steel duct system of proprietary design and 

construction. For thermal insulation and hard body impact 

test, the duct system is to be wrapped with Roxul "Firesafe" 

Rockwool with a 130 microns aluminum foil facing and a 



nominal density of 160kg/m 3 . 

Static Smoke Ventilators (625) Souchier "Certiciel" & "Certilight" Smoke Ventilators for 

Static Smoke Extraction System / a) Certiciel b) Certilight 

(Sizes as indicated in the annex to EC Certificate of 

Conformity No.: 336-CPD-6742-2) 

(4) Fire Resistant Cables 

Fire Resistant Cable (180) Cavicel SPA "Firecel" SR112 AND SR114H Fire Resistant 

Cables 

SE Controls, UK 15/8/2011 August 2016 No assessment was made on the 

smoke vents designed for operation by 

the actuator models covered in this 

letter. 

New Glory Engineering Limited, 

PRC 

18/12/2012 January 2014 a) All design, fabrication and insulation 

of fire rated duct shaould be certified 

with a label stuck on every duct 

section by Centalink International Ltd., 

who should possess a valid licence in 

Hong Kong issued by Firesafe Fire 

Ratesd Ductwork Limited. b) The fixing 

of drop rods into supporting structure 

shall be in accordance with the 

reference letter of WFRC 

135052/2/RHE dated 19.2.2004 

Souchier, France 2/2/2010 February 2014 A valid "EC - Certificate of Conformity" 


Cavicel SpA 7/2/2007 February 2012 

page11/40



Fire Resistant Cable(182) "SEGURFOC" Fire Resistant Cables Grupo General Cables Sistemas 

S.A., Spain 

21/2/2007 June 2012 

Fire Resistant Cable (200) "AEI" Firetec Multi-core and Armoured Fire Resistant 

Cables 

AEI Cables Limited, Durham, UK 25/4/2007 April 2012 

Fire Resistant Cable(234) "AEI" Mineral Insulated Cables (light duty, single core and 

heavy duty) 

AEI Cables Limited, Durham, UK 11/10/2007 October 2012 

Fire Resistant Cable(247) "DUCAB BICC" DUCAB - FR Fire Resistant Cables: 

Conductor size 1.5 to 35mm 2 & 50 to 400mm 2 Dubai Cable Company(Private) 

28/11/2007 November 2012 

inclusive, 2.3 

& 4 core 

Ltd., U.A.E. 

Fire Resistant Cable(256) Cableplus "Firepro" Fire Safety Cables 1.0mm 2 

to 16mm 2 Cableplus (SuZhou) Technologies 15/2/2008 Feb 2013 

single core tested to BS6387: 1994 Cat. C, W, Z. Co.,Ltd., PRC 

Fire Resistant Cable(287) "Fire Force" fire resistant cables 

(conductor size: 1, 1.5, 2.5, 4mm 2; 2, 3& 4 core) 

Eland Cables Ltd., U.K. 20/6/2008 June 2013 

Fire Resistant Cable(304) "Fireflix" - 1.5 mm 2 , single core Caledonian Cables Ltd., U.K. 5/8/2008 August 2013 

Fire Resistant Cable(307) "DUCAB BICC" DUCAB - FR Fire Resistant Cables: Model: 

Ducab - FR SC Conductor size 

1.5 to 10mm 2, Dubai Cable Company(Private) 

12/8/2008 August 2013 

single core Board 

Ltd., U.A.E. 

Fire Resistant Cable (316) "Irish Driver-Harris" (IDH) Kilflam Fire Resistant Cables, Irish Driver-Harris Co. Ltd., Ireland 22/9/2008 September 2013 tests for C, W and Z categories for 

Model: Kilflam 1000, Kilflam 1200, Kilflam 2000 and Kilflam 

cables Kilflam 1000 and Kilflam 1200 

3000 

were done in steel conduit 

Fire Resistant Cable (318) Cableplus "Firepro" Fire Safety Cables, Models: Cableplus 

"Firepro" Fire Safety Cables, Sizes: 1.0mm 2 to 16mm 2 

Cableplus (SuZhou) Technologies 2/10/2008 February 2013 A valid " Certificate of Product 

Co.,Ltd., PRC 

Conformity" by LPCB shall be made 

inclusive, single core (exact sizes as detailed in LPCB 

Certificate No. 827a Issue No. 01) 

available. 

Fire Resistant Cable (332) MAS "Fireres" "FR2C" Fire Resistant Cables 

Hebei Huatong Wire & Cable 

24/11/2008 November 2013 

Model: FR2C 

Manufacture Co., Ltd., P.R.C. 

Fire Resistant Cable (337) Sigma Fire Resistant Cables 

Sigma Cable Company (Pte) Ltd., 19/12/2008 December 2013 Valid "Certificate of Conformity" on 

Model: a) "EL-600MA" 

Singapore 

compliance with SS 299: Part 1:1998 

b) "ESL-600MA" 

shall be made available on request. 

page12/40

Fire Resistant Cable (369) Nexans Fire Resistant Cables 

Model: a) Alsecure NX100 

b) Alsecure NX400 

Fire Resistant Cable (373) WILSON / FR-3S / Plain, annealed, stranded copper 

conductor with mica tape layer and crosslink L.S.O.H. 

insulation (red and black) 2C x 1.0 mm 2 to sC x 2.5 mm 2 

Fire Resistant Cable (381) MAS "Fireres" / a) FRIC single-core (conduit wiring) fire 

resistant cables b) FRICXL single-core (surface power 

cable) fire resistant cables c) 694nXFR n-core armoured 

fire resistant cables (where n runs from 2 to 5 and 7 to 48) 

Fire Resistant Cable (408) Datwyler / Pyrofil Fire Safety / Comprising copper 

conductors insulated by a double layer insulation with a 

high temperature resistant glass fiber tape, an A1laminated 

tape screening and a flame-retarded polyolefin 

outer sheath 



Nexans Ireland Ltd., Ireland 2/6/2009 June 2014 a) As testing of large size single core 

cables in accordance with BS 6387 for 

Cat. C, W, Z is not practicable, 

assessment of such cables would only 

be made on project basis. b) The 

cables shall carry markings as detailed 

in the letter from Nexans Ireland Ltd. 

ref.: DD230109 of 23.1.2009 c) This 

assessment is valid only for the 

batches of cables named above 

manufactured by Nexans Ireland Ltd. 

up to 25.7.2008 at their production 

facility in Ireland. 

Wilson Cables Private Ltd., 

Singapore 

Hebei Huatong Wire & Cable 

Manufacture Co., Ltd., P.R.C. 

16/6/2009 June 2014 A valid Certificate of Conformity by 

PSB Singapore covering the cables 

shall always be available. 

13/7/2009 July 2014 a) It is recognized the difficulties to 

carry out BS 6387 CWZ for large size 

single core cables. Therefore, these 

large size cables are acceptable for 

inter-connection within a cubicle or 

electrical panel only. Other 

applications should be submitted for 

consideration on project basis. b) A 

valid "Certificate of Conformity" on 

quality management system shall be 

made available on request. c) This 

letter supersedes our previous one of 

the same series dated 5.12.2006, 

28.1.2008 and 22.10.2008 for the 

same brand of cables. 

Datwyler AG, Switzerland 20/1/2010 January 2014 A valid LPCB Certificate shall be made 

available and the cable shall be 

labelled with the appropriate LPCB 

mark 

page13/40

Fire Resistant Cable (409) WILSON / a) FR-3S - 1C x 1.5 mm 2 to 4.0 mm2, b) FR-100 

- 2C x 1.0 mm2 to 1.5 mm2 with or without earthconductor 

(CPC), c) FR-108 - 2C x 1.5 mm2 to 4C x 4.0 mm2 with or 

without earth conductor (CPC), d) FR-200A - 1C x 120 

mm2 to 1,000 mm2, d) FR-200A - 2C x 1.5 mm2 to 4C x 

300 mm2 and 5C x 1.5 mm2 to 37C x 4.0 mm2 / a) 

stranded copper conductor / mica tape barrier / PE 

insulation / LSF compound sheath, b) Armour cables with 

galvanised round steel / aluminium wires as indicated on 

the relevant Certificate of conformity 



Wilson Cables Private Ltd., 

Singapore 

21/1/2010 December 2012 Valid Certificate of Conformity shall be 

made available for all cable models. 

Fire Resistant Cable (424) Wilson Cables / FR-200 a) 1C x 1.5 mm 2 to 1,000 mm 2 , b) 

2C x 1.5 mm 2 to 4C x 300 mm 2 , & c) 5C x 1.5 mm 2 to 37C x 

4.0 mm 2 Wilson Cables Private Ltd., 

26/4/2010 March 2013 Valid Certificate of Conformity shall be 

Singapore 

/ Stranded copper conductor/mica tape 

barrier/XLPE insulation/LSOH/LSF compound sheath 

made available for all cable models. 

Fire Resistant Cable (427) Draka / a) "Sifer 950i" and "Saifer 950s" single-core fire Drake UK Ltd., U.K. 3/2/2009 February 2014 A valid "Certificate of Product 

resistant cables, b) "Firetuf Power OHLS" multi-core 


armoured fire resistant cable / a) "Sifer 950i" and "Saifer 

950s" are both single-core fire resistant cable with stranded 

copper conductor, mica glass or polyester tape barrier, 

cross linked OHLS type E15 insulation with OHLS type 

LTS1 sheath (for model Sifer 950s only). b) "Firetuf" power 

cable is of stranded copper conductor / mica & polyester 

tapes barrier / cross linked polyrthylene insulation / 

interlocked polyester tape wrapping / OHLS thermoplastic 

bedding sheath / galvanised steel wire armour / OHLS 

thermoplastic sheath. 

available. 

Fire Resistant Cable (428) Draka / a) FTPU 950 fire resistant Mifer OHLS, b) 

Easystrip, c) Firetuf Plus / a) "FTPU 950 fire resistant Mifer 

OHLS" are fire resistant OHLS insulated and sheathed 

multi-core cables, b) "Eaststrip" are fire resistant silicon 

rubber insulated and OHLS sheated multi-core cables, c) 

"Firetuf Plus" are fire resistant silicon rubber insulated and 

OHLS sheathed multi-core cables 

Drake UK Ltd., U.K. 26/2/2009 February 2014 Valid "Certificate of Product 


available for the cables. 

page14/40

Fire Resistant Cable (432) Nexans / NX400 Alsecure Plus / Armoured multi-core cable 

with stranded copper conduxtor / mica tape / XLPE 

insulation / polyolefin inner and outer sheath 

Fire Resistant Cable(441) "DUCAB BICC" DUCAB - FR SC Fire Resistant Cables / 

Ducab - FRSC / Cables comprising stranded copper 

conductors - mica glass tape - XL-LSF insulation 

Fire Resistant Cable(446) Irish Driver-Harris / Kilflam 1000, Kilflam 1200, Kilflam 2000 

and Kilflam 3000 / Single or multi-core cable with annealed 

copper conductor, mica glass tape, silicon rubber insulation 

and LSZH sheathing 

Fire Resistant Cable(452) KEYSTONE / FR 7211 / Single core cable comprising solid 

/ stranded plain copper conductor, mica glass tape, Mylar 

tape and a LSNH insulation 



Nexans Turkiye Endustri Ve Ticaret 

A.S., Turkey 

Dubai Cable Company(Private) 

Ltd., U.A.E. 

11/5/2010 May 2014 a) A valid product certificate issued by 

BASEC shall be made available at all 

times; the cable shall carry markings 

detailed in the above listed certificates, 

b) The cable shall carry markings 

detailed in the above listed certificates, 

c) This letter supersedes our previous 

one of the same series dated 

04.02.2010 on the same product. 

26/5/2010 May 2015 The cables are designed for laying in 

metal conduit or on metal cable tray. 

Valid ISO 9001 certificate shall be 

maintained. 

Irish Driver-Harris Co. Ltd., Ireland 5/7/2010 July 2015 Tests for C, W and Z categories for 

cables Kilflam 1000 and Kilflam 1200 

were done in steel conduit. Valid 

certificates issued by Loss Prevention 

Certification Board shall be made 

available on request. 

Dongguan Keystone Electric Wire 

& Cable Company Limited, PRC 

Fire Resistant Cable(454) Samson / SP3025HT/LS / Comprise of low smoke halogen Sun Shine Metal Electrical Mfg., 

free compound outer sheath, aluminium/polyester tape with 

tinned copper drain wire and annealed stranded circular 

tinned copper conductors insulated with low smoke halogen 

free compound and mica tape fire barrier 

Shenzhen, P.R. China 

Fire Resistant Cable (465) Nexans "NX100 Alsecure Plus" Fire Resistant Cables / 

Model: NX100 Alsecure Plus / Single-core cable with 

stranded copper conductor / mica tape barrier / polyolefin 

outer sheath Sigle core, 1.5mm 2 to 95mm 2 

Fire Resistant Cable (475) "Samson" Fire Resistant Cables, SP19021 HT/LS and 

SP3202 HT/LS a) 2 core, 0.65 mm 2 conductor b) 2 core, 

1.0 mm 2 conductor 

Fire Resistant Cable (517) "Pyrotenax" Pyro MI Mineral Insulated Cables / Heavy Duty, 

Light Duty & Twisted Light Duty 

Fire Resistant Cables (521) "DUCAB BICC" Ducab-FR Fire Resistant Cables / Ducab - 

FR 

Nexans Turkiye Endustri Ve Ticaret 

A.S., Turkey 

Sun Shine Metal Electrical Mfg., 

Shenzhen, PRC 

Tyco Thermal Controls UK Ltd., 

U.K. 

Dubai Cable Company(Private) 

Ltd., U.A.E. 

23/7/2010 July 2015 The cable shall carry markings. 

10/8/2010 August 2013 a) A valid certificate for quality 

assurance scheme shall be made 

available at all times, b) the cable 

shall carry markings detailed above 

4/2/2010 February 2014 A valid product certificate issued by 

BASEC shall be made available at all 

times; the cable shall carry markings 

detailed in the above listed certificates 

25/11/2010 November 2015 a) A valid certificate for qulity 

assurance scheme shall be made 

available at all times. b)The cables 

shall carry markings detailed. 

30/5/2011 May 2016 All cables shall bear the appropriate 

LPCB markings. 

8/6/2011 June 2016 

page15/40



Fire Resisrtant Cables (529) "Prysmian" Fire Resistant Cables / a) FP100 b) FP150 c) 

FP200 Gold d) FP200 Flex e) FP300 f) FP300MI g) FP400 / 

Single Core: a) "FP100" from 1.0 to 95 mm 2 b) "FP300" 

from 1.0 to 35 mm 2 c) "FP300MI" from 1.0 to 35 mm 2 2, 3 & 

4 Core: d) "FP150" from 1.0 to 2.5 mm 2 e) "FP200 Gold" 

from 1.0 to 4.0 mm 2 f) "FP200 Flex" from 1.0 to 2.5 mm 2 g) 

"FP300" from 1.0 to 16 mm 2 h) "FP400" from 1.0 to 400 

mm 2 Others: "FP200 Gold 1.0 mm 2 ; 1.5 mm 2 Prysmian Cables & Systems Ltd., 

UK 

, 7, 12 & 19 

coreand25mm 2 7&12core 

Fire Resistant Cable (554) Royal Horse "H07Z1-R (Type 1)" Fire Resistant Cable / 

H07Z1-R (Type 1) / Single core non-sheathed cable with 

stranded rigid conductor, mineral ceramic (mica/glass) tape 

and a LSZH insulation / Conductor Size: 1.5 to 16 mm 2 

Fire Resistant Cable(566) "SEGURFOC" Fire Resistant Cables / a) SEGURFOC FR 

950 07Z-R-M cable b) SEGURFOC FRA 950 armoured 

cable c) SEGURFOC FRA 950-1 armoured cable / a) 

SEGURFOC FR 950 07Z-R-M cable Single core, nominal 

csa 1.5 to 16 mm 2 b) SEGURFOC FRA 950 armoured 

cable 2, 3, 4 core, nominal csa 1.5 to 185 mm 2 c) 

SEGURFOC FRA 950-1 armoured cable 2, 3, 4 core, 

nominal csa 240 to 400 mm 2 

Fire Resistant Cable(569) "KME" Mineral Insulated Cables / Mineral Insulated Cable 

a) MICO - KME Light Duty b) MICO - KME Single Core 

Heavy Duty c) MICO - KME Multie Core Heavy Duty / Exact 

number of cores and sizes are as detailed in Loss 

Prevention Certification Board (LPCB) Certificate No. 427a 

(Issue No. 10) 

S.G.H. Electric Wire & Cable Co., 

Ltd., PRC 

Grupo General Cables Sistemas 

S.A., Spain 

Fire Resistant Cable(571) Oman Cables Industry (SAOG) "OCIFLAM-FSA" Fire 

Resistant Cables / "OCIFLAM-FSA" 2, 3 and 4-core 

armoured fire resistant cables / Stranded annealed plain 

copper conductor / mica glass tape covered with XLPE 

insulation / LSF bedding / galvanized steel wire armour / 

LSF outer sheath Conductor Size : 16 - 400 mm 2 Oman Cables Industry (SAOG), 

, 2, 3 and 

4-core cable, as detailed in the appendix to Loss Prevention 

Certification Board Certificate No. 995a of 14.12.2011 

Sultanate of Oman 

Fire Resistant Cable(573) "Firecel" SR112 (Twisted) Cable cable Size : 1 x 2 x 

1.5mm 2 

Fire Resistant Cable (578) "KEYSTONE" Fire Resistant Armoured Cable Dongguan Keystone Electric Wire 

& Cable Company Limited, 

Guangdong, PRC 

23/6/2011 June 2016 a) Large single core cables mentioned 

in the above certificates and which 

comply with BS 6387 Cat. C only will 

be considered on project basis. B) All 

cables shall bear the appropraite 

LPCB markings. 

6/10/2011 October 2016 The cable shall bear the KEMA-KEUR 

certification mark and other 

appropriate markings. 

20/1/2012 January 2017 a) Large fire resistant single core 

cables mentioned in Certificate No. 

722a (Issue No. 02) which comply with 

BS 6387 Cat. C or C, W only will be 

considered on project basis. B) The 

cables shall bear the appropraite 

"LPCB" mark. 

KME Italy S.P.A., Italt 10/2/2012 February 2017 a) A valid certificate issued by LPCB 

shall always be available. b) The 

cables shall bear the appropriate 

"LPCB" mark. 

16/2/2012 February 2017 The cables shall bear the appropriate 

"LPCB" mark 

Cavicel SpA, Italy 14/3/2012 March 2015 The SR112 (Twisted) cable is to be 

enclosed in steel conduit and/or metal 

trunking. 

3/5/2012 May 2017 The cable shall bear the LPCB mark 

for identification purpose. 

page16/40

Fire Resistant Cable(579) "Firecel" SR112 single core and SR114H & SR114E multicore 

copper cables 

Fire Resistant Cable(592) ATOM Fire Barrier S Single Core Fire Resistant Cables / 

ATOM Fire Barrier S / No. of Core and Size: Single core, 

1.5mm 2 to 70mm 2 (Sizes as indicated in LPCB Certificate 

No. 905b, Issue No. 01 of 23.4.2012) 

Fire Resistant Cable(603) ACT® 2/3/4-Core Fire Resistant Power Cables / "ACT^®" 

Two-Core LSZH Fire Resistant Armoured Power Cables, 

Type 6942B-FR, "ACT^®" Three-Core LSZH Fire Resistant 

Armoured Power Cables, Type 6943B-FR, "ACT^®" Fouro- 

Core LSZH Fire Resistant Armoured Power Cables, Type 

6944B-FR 

Fire Resistant Cable (604) ATOM KABLO / Atom Fire Barrier L / Construction : 

Armoured multi-core cable with standed copper conductor / 

mica tape / XLPE insulation / LSZH filler and outer sheath / 



No. of core and size : 2, 3, 4 and 5 cores, 1.5mm 2 to 

35mm 2 7, 12 and 19 cores, 1.5mm 2 to 4.0mm 2 (Sizes as 

indicated in LPCB Certificate No. 905a, Issue No. 02 of 

3.8.2012) 

Fire Resistant Cable(626) "Firestop" FS-90 Fire resistant Cables / Firestop FS-90 

Multicore Cable / Conductor Sizes : 1.5 to 400 mm 2 

inclusive, 4-core 

Fire Resistant Cable (617) AEI "Firetec" Single Core Fire Resistant Cables / Firetec 

Single Core LSZH cables / Sizes : 1.0 to 35 mm 2 inclusive, 

single core (exact sizes as detailed in LPCB Certificate No. 

221c, Issue No. 08) 

(5) Flexible Connectors 

Cavicel SpA, Italy 16/5/2012 May 2017 a) The single core SR112 cables must 

be enclosed in steel conduit and/or 

metal trunking b) The cable shall bear 

the LPCB mark for identification 

purpose. 

ATOM KABLO SANAYI ve Ticaret 

A.Ş., Turkey 

Tianjin Suli Cable Group Co. Ltd., 

PRC 

ATOM KABLO SANAYI ve Ticaret 

A.Ş., Turkey 

Prysmian Power Cables and 

Systems Australia Pty Ltd., 

Australia 

27/7/2012 July 2017 a) The cables shall be enclosed in 

steel conduits. b) The cables shall 

bear the appropriate LPCB markings. 

27/9/2012 October 2015 The cable shall bear the "ACT®" trade 

name and KEMA-KEUR certification 

mark for identification purpose. 

4/10/2012 October 2014 The cable shall carry markings 

detailed in the above listed certificates. 

27/10/2012 May 2016 Valis ISO 9001 certificate should be 

maintained. 

AEI Cables Limited, Durham, UK 27/11/2012 November 2017 a) The cables shall be enclosed in 

steel conduits as stipulated in the Test 

Certificate. b) The cables shall bear 

the "LPCB" mark. c) A valid 

"Certificate of Product Conformity" by 

LPCB shall be made available. 

page17/40

Flexible Connector(430) Class "0" Ductflex Flexible Duct Connector for Use in 

Ventilation Systems / a) Ductflex 70A & b) Ductflex 300 / a) 

Reinforced fibreglass coated on both sides with rubber with 

an overall thickness of 0.5 to 1.0 mm, area density of 0.52 



kg/m 2 and with a standard reference black colour 7 b) 

Reinforced woven fibreglass with stainless steel wire, 

coated on both sided with fire resistance silicon rubber with 

an overall thickness of 1.0 to 1.5 mm, area density of 1.92 

kg/m 2 with a standard reference orange brown colour 

Flexible Connector (526) "COLAN" AF406/FRN Textile Fabric / AF406/FRN (Flame 

Retardant Neoprene) textile fabric / A black glass fibre 

fabric with a nominal thickness of 0.54 mm and a nominal 

weight of 800 g/m 2 woven from satin weave Type E glass 

fibre and coated on both sides with flame retarded 

neoprene. 

Flexible Connector (551) Colan "AF805 SIL" Glass Fibre Fabric as Flexible 

Connector in Ventilation/Smoke Extraction System / 

"COLAN AF805 SIL" glass-fibre fabric / A woven fibreglass 

fabric (high bulk borosilicate type) with silicon rubber 

coating on both sides, having an overall thickness of 2.2 

mm and weight of 1570 g/m 2 , and with a standard 

reference colour red. 

(6) Fire/ Fire & Smoke Dampers 

Fire Damper "RUSKIN TFD 80" Heavy Duty Fire and Smoke Damper (G 

I) (169) 

Guang Zhou Jitai Development Co. 

Ltd., P.R.C. 

3/5/2010 May 2013 a) No assessment was made on the 

smoke generation by the material 

under fire condition. & b) The products 

shall bear suitable model name 

makings. 

Colan Products Pty Ltd., Australia 13/6/2011 June 2016 a) No assessment was made on the 


generated by material under fire. b) 

The material shall bear the marking 

"AF406 FRN" as a means of 

identification. 

COLAN Products Pty Ltd., 

Australia 

Ruskin Company (Supplier: Applied 

Technology Intergration Ltd) 

26/9/2011 September 2016 a) No assessment was made on the 



The product shall have label tag(s) 

bearing the word "AF805 SIL" sewn on 

it as a means of identification. 

12/12/2006 December 2012 

Fire Damper (205) Advanced Air - series 0100 Curtain Type Fire Damper Advanced Air (UK) Ltd. 11/5/2007 April 2012 

Fire & Smoke Damper (243) Ruskin Model FED36 Fire and Smoke Damper - Horizontal 

Mounting 3458 mm(W)X2438mm(H); Vertical mounting 

3048mm(W)X2438mm(H) 

Ruskin Co., USA or Thailand 9/11/2007 October 2012 

Fire Damper 

(248) 

"Greenheck" DFD Curtain Type Fire Damper 

a)DFD-150 

b)DFD-M150 

c)DFD-210 

d)DFD-M210 

Fire & Smoke Damper (259) "Greenheck" Fire & Smoke Damopers 

Series : a) FSDF-211 ; b) FSD-M211 Glavanised steel 

construction with blades with operated by actuactor. 

Proprietary Made Fire Damper 

(270) 

Fire Damper 

(272) 

"Safe-Air Dowco" Curtain Type Fire Damper Model: 

150, 151, 300 & D150 

"BSB" FD Series curtain type fire damper 

(Horizontal and vertical mounting) 

a) For DFD-150 and DFD-210 

Greenheck Fan Corporation, USA 

b) For DFD-M150 and DFD-M210 

Greenheck Khunsan, PRC 

a) 'Greenheck Fan Corporation, 

USA : b) Greenheck Khunsan, 

PRC 

14/12/2007 June 2012 

7/3/2008 June 2012 

Safe-Air ofIllinois Inc., USA 17/4/2008 April 2012 

BSB Engineering Limited, Kent, 

U.K. 

18/4/2008 December 2012 

page18/40

Fire Damper 

(293) 



"SUSKIN" BIBD Series Curtain Type Fire Damper 

Model: DIBD 2, DIBD 2SS, DIBD 23 & BIDB 23SS 

Fire & Smoke Damper (300) "Safe-Air Dowco" Fire and Smoke Damper 

Model: 771, 772, 781 and 782 with frame collarof different 

forms 

Fire & Smoke Damper (380) Gilberts / "Ductgard" / A combined fire and smoke damper 

comprising a galvanized steel frame with stainless steel 

interlocking blades and frame side seals 

Fire Damper (382) Actionair / FBL, FBH, FBC, FBO / Un-insulated galvanised 

steel folded blade fire damper comprising 0.7 mm thick G.I. 

interlocking folding blades encased in a 1.2 mm thick G.I. 

steel channel section frame. A locking ramp which is made 

of 1.5 mm thick G.I. sheet is provided to ensure the blade 

remained in position when the damper is closed. Other 

details of the damper construction are as detailed in test 

report no. TE 214030. 

Fire and Smoke Damper (401) & 

(546) 

Lloyd / FSD-111-1 and FSD-111-2 / Channel frame 

constructed of 1.6 mm G.I. steel with an interlocking 

stacked hat section and 1.6 mm thick G.I. V-formed blades. 

Linkage device is zinc-plated steel concealed within the 

channel frame. The product can also be of an entirely 

stainless steel (Grade 304 or 316) or a combination of G.I. 

steel and stainless steel construction as described in the 

Assessment Report mentioned below 

Fire Damper (414) RUSKIN / IBD / A curtain damper formed by interlocking 

galvanized mild steel / stainless steel (Grade 304 or 316) 

blades mounted in a galvanized mild steel/stainless steel 

(Grade 304 or 316) frame held in open position by fusible 

link; closure of damper is effected by stainless steel 

springs. 

Fire Damper (443) Actionair / Fire, Shield Series 101, 201, 301 and 401 / Uninsulated 

stainless steel folded blade fire damper having 

unbroken joints and comprising of stainless steel constant 

tension closure springs and stainless steel peripheral 

gasket. The assembly should be fitted into the structure 

with a galvanized steel "HEVAC/HVAC" installation frame. 

Ruskin Co., USA, PRC or Thailand 8/7/2008 July 2013 

Safe-Air of Illinois Inc., USA 18/7/2008 July 2012 These dampers are not intended for 

smoke extraction system and 

staircase pressurization system. 

Gilberts (Blackpool) Ltd., UK 10/7/2009 July 2012 The dampers shall be permanently 

marked or stamped with label(s) which 

shall remain visible after it is fixed into 

position for the identification of its 

brand name and model 

Ruskin Air Management Ltd., UK 15/7/2009 March 2014 The dampers are to be fitted with 

fusible links designed to operate up to 

a temperature of 69 o C and approved 

by this department. 

Lloyd Industries Inc., USA 09/12/2009 9/9/2011 December 2013 a) The damper shall remain listed in 

the UL Certifications Directory, 

b) The dampers shall be permanently 


shall remain visible after fixed into 

position for the identification of brand 

name and model 

Delta Pyramax Co. Ltd. 7/4/2010 April 2015 The fusible link used with the damper 

shall be of a type approved by the 

Director of FS and with a rating not 

exceeding 69 o C 

Ruskin Air Management Ltd., UK 22/6/2010 June 2014 The fusible link shall be of FSD 

approved type with a rating not 

exceeding 69oC 

page19/40



Fire Damper (449) TANDA / TFD - 100 series is a curtain type completed with Shenzhen Longgang Pingshan 

integral sleeve; the frame is made of four pieces of steel Jiangling Luen ming Manufacturing 

sheet joined at the corners by riveted overlaps. This is fitted Factory, PRC 

centrally inside a duct and fastened together by rivets. The 

curtain comprises interlinked slats with the top one riveted 

to the frame. The damper can be of full galvanized steel, 

full stainless steel, galvanized steel frame with stainless 

steel curtain or stainless steel frame with galvanized steel 

curtain construction. The stainless steel can be of Grade 

304 or 316. & TFD - 200 series is a curtain type with frame 

formed from C-section steel. The curtain comprises 

interlinked slats with the top one riveted to the frame. The 

damper can be of full galvanized steel, full stainless steel, 

galvanized steel frame with stainless steel curtain or 

stainless steel frame with galvanized steel curtain 

construction. The stainless steel can be of Grade 304 or 

316. 

Fire Dampers (457) TROX / a) FSD series, b) FSP series, c) FSE series / a) 

FSD series - Fire damper assemblies of galvanised mild 

steel construction using a curtain type arrangement, b) FSP 

series - Fire damper assemblies similar to FSD series, but 

with blades constructed from stainless steel Grade 430, c) 

FSE series - Fire damper assemblies similar to FSD series 

with the catch plates and the case being constructed from 

stainless steel Grade 304L 

Fire & Smoke Damper (473) & 

(507) 

"TROX" SFD - Fire & Smoke damper / SFD Series / 

Assemblies is of galvanised mild steel construction, with1.5 

mm thick sleeve, 1.5 mm thick blades for vertical mounting 

and 2 mm thick for horizontal mounting, springs and catch 

plates as described in the test reports. The frame is made 

up of top hat sections welded together. A linkage system 

enables all blades to move and lock together when in the 

closed position. 

9/7/2010 July 2015 a) A label to indicate the manufacturer, 

model, standards and fire resistant 

rating achieved should be fixed to the 

damper. b) The fusible link shall be of 

a type approved by this department. 

(Installation and Mounting Methods 

and Details: Refer to F. S. letter dated 

22.6.2012) 

Trox (Malaysia) Sdn. Bhd. 10/8/2010 July 2015 The dampers are to be fitted with 

fusible links release of a type 

approved by this department with a 

rating not exceeding 69 o C 


Malaysia 

05/11/2010 16/3/2011 July 2015 The dampers shall be permanently 


shall remain visible after it is fixed into 

position for the identification of its 

brand name and model 

page20/40

Fire & Smoke Damper (500) "Prefco" Muti-blade Fir/Smoke Damper Series 5000 / Noninsulated 

multi-blade damper of galvanized steel 

construction complete with linkages 

Fire & Smoke Damper (515) "Trox" JFM Fire & Smoke Damper / "JFM-G-F" and "JFM- 

E-F" multi-leaf fire damper with vertical and horizontal 

mounting models 



Perfect Air Control Inc. 1/3/2011 March 2016 a) Separate actuator shall be fitted for 

each single damper module that 

makes up a multiple module. b) Valid 

assment report on the integrity of 

multiple module damper assembles to 

BS476:Part 20 shall always be made 

available. 

Trox (Malaysia) Sdn. Bhd., 

Malaysia 

19/5/2011 March 2016 

Fire Damper (547) "Prefco" 5500 E4A Curtain Type Fire Damper / 5500 E4A Perfect Air Control Inc., USA 20/9/2011 September 2016 a) The damper shall be fitted with a 

FSD approved fusible link of 

temperature rating not exceeding 

69 o C. b) A valid assessment report 

shall be available to substantiate the 

fire resistance performance of the fire 

damper assembly. 

Fire Damper (548) "Prefco" 5500 E6-LPC Curtain Type Fire Damper / 5500 

E6-LPC 

Fire & Smoke Damper (576) RUSKIN "FSD60" Combined Fire & Smoke Damper. 

Construction: Details as described and illustrated in 

Warrres No. 43157 & SwRI Project No. 01.13537.01.312, 

0.7 mm thick galvanized mild steel frame with 0.3 mm thick 

stainless steel convex shaped side seals and G.I. blade 

stops with the longer leg welded to the web of the frame. 

Mounting: Vertical and horizontal. Maximun Sizes: a) Sigle 

section: 750 mm x 900 mm (W x H) b) Multiple section: 

3,048 mm x 2,438 mm (W x H) for electric and pneumatic 

actuator 

Perfect Air Control Inc., USA 20/9/2011 September 2016 a) The damper shall be fitted with a 

FSD approved fusible link of 

temperature rating not exceeding 

69 o C. b) A valid assessment report 

shall be available to substantiate the 

fire resistance performance of the fire 

damper assembly. 

Ruskin Co., USA or Thailand 26/3/2012 March 2017 The dampers shall maintain its status 

as an UL listed product. 

page21/40

Fire & Smoke Damper (588) "TROX" SFD, SFP and SFE Fire & Smoke Damper / SFD, 

SFP and SFE Series 

Fire Damper (590) "Actionair" Re-settable Thermal Release Cassette, Part No. 

CNNN 01983 / Temperature Rating: Not exceeding 69 o C / 

For use with "Actionair" Fire/Shield Series 101, 201, 301, 

401, FBL, FBH, FBC and FBO bladed curtain fire dampers 




Malaysia 

Fire Damper (600) "LASER" 9020 Series Curtain Type Fire Damper for Use in Laser Resources (Asia) Co. Ltd., 

Ventilation System / "LASER" curtain type fire damper / a) 

9020 GV - G.I. frame and blade (without spring loaded 

housing) b) 9020 G - G.I. frame and blade c) 9020 S - G.I. 

frame and stainless steel blade d) 9020 SS - Stainless steel 

frame and blade / The damper comprises interlinked 

galvanized steel / stainless steel damper slats housed in 

galvanized steel / stainless frames with / without spring 

loaded housing. The stainless steel can be of Grade 304 or 

316. 

Hong Kong 

27/6/2012 July 2015 The dampers shall be permanenly 


shall remain visible after fixed into 

position for the identification of brand 

name and model. 

Ruskin Air Management Ltd., U.K. 6/7/2012 January 2014 The cassette shall bear the following 

product identification marks on its 

body: a) Brand name b) Temperature 

tating mark of 69 o C c) Circular dial 

date showing the month and year of 

manufacture 

24/8/2012 January 2017 a) Inspection reports covering routine 

inspection and "check tests" done in 

accordance with the schedule of the 

follow-up services by Vipac Engineers 

and Scientists (HK) Ltd., shall be 

made available on request. b) The 

damper shall bear the "Laser" trade 

mark and production label with 

company name and model number is 

attached on the damper. c) The 

dampers are to be fitted with fusible 

links approved by this department and 

designed to operate up to a 

temperature of 69 o C 

page22/40

Fire & Smoke Damper (619) "LASER" 9010 Series Combined Fire and Smoke Damper 

for Use in Smoke Control / Ventilation System / "LASER" 

blade type combined fire and smoke dampers / a) 9010G - 

G.I. frame and blade (vertical & horizontal mounting) b) 

9010S - G.I. frame and stainless steel blade (vertical & 

horizontal mounting) / The damper comprises profiled 

galvanized steel / stainless steel (Grade 304 or 316) 

damper blades housed in galvanized mild steel frames with 

blade linkage and operated by electric actuator. The 

thickness of the steel, the clearance between the blade 

ends and the frame and other details shall be as described 

in BRANZ report nos. FR 3606 (Issue 2) AND far 2922 

(iSSUE 2) Size: 200mm(W) x 200 mm (H) - 900 mm (W) x 

900 mm (H) for each module Maximum size up to: a) 

Horizontal - 2788 (W) x 1844 mm (H) (3 x 2 modules) b) 

Vertical - 3732 mm (W) x 2788 mm (H) (4 x 3 modules) 

(7) Flexible Ducts 

Flexible Duct (317) "ISODUCT" Flexible Duct for use in Mechanical Ventilation 

Systems, Model "Econoflex A-1 I25 AL" 

Flexible Duct (387) Aluduct / A flexible duct comprising a core layer of 

aluminium laminate with an encapsulated high tensile 

spring steel wire helix, an insulation layer of fibreglass 

blanket (25 mm thick and density of 16 kg/m 3 ) and an outer 

vapour barrier layer made of aluminium foil. 

Flexible Duct (415) Wyser-Air / FDI - 16 / An inner core fabricated from a 

scrim-reinforced polyester and aluminium laminate, 

completely encapsulating a steel wire helix, bonded with a 

double seam of hot melt adhesive, a core of fire blass 

insulation having a thickness of 25mm and a density of 16 

kg/m 3 , an outer vapour barrier jacket comprising a polyester 

and aluminium laminate 

Flexible Duct (470) "AFS" Flexible Air Duct / a) ALUAFS.70, b) ISOAFS-ALU, 

c) SONOAFS-ALU / Duct Diameter 102mm to 356mm 



Laser Resources (Asia) Co. Ltd., 

Hong Kong 

Air Trade Centre Limited 30/9/2008 April 2012 

11/12/2012 October 2016 a) Inspection reports covering routine 

inspection and "check tests" done in 

accordance with the schedule of the 

follow-up services by Vipac Engineers 

and Scientists (HK) Ltd. shall be made 

available on request. b) The damper 

shall bear the "Laser" trade mark and 

production label with company name 

and model number is attached on the 

damper. c) The dampers are to be 

fitted with fusible links approved by 

this department and designed to 

operate up to a temperature of 69 o C 

Jitai Development Ltd. PRC 3/8/2009 September 2014 No assessment was made on the 


generated by the product under fire. 

Wysermann Co. Ltd., HK 9/4/2010 April 2013 a) No assessment was made on the 


generated by the product under fire 

AFS Flexible Kanal Ticareti Ltd. 

Sti., Turkey 

29/9/2010 November 2014 a) No assessment was made on the 



page23/40

Flexible Duct (513) "PAL®" Winflex 33i Flexible Air Duct / "PAL®" Winflex 33i 

Insulated Aluminium Flexible Air Duct / A factory made 

insulated round flexible air duct of different diameters with 

inner foil facing encapsulating a high tensile spring steel 

wire helix to form the wall of the air duct which is insulated 

with 25 mm thick, density 24 kg/m 3 yellow colour fibreglass 

with double-sided aluminium foil facing. 

Flexible Duct (528) "PAL®" Winflex 33 Aluminium Flexible Air Duct / "PAL®" 

Winflex 33 Aluminium Flexible Air Duct / A factory made 

round flexible duct of aluminium foil polymer composite 

encapsulated a high tensile spring steel wire helix to form 

the wall of the duct. The duct can be of different diameters 

with an overall wall thickness of 0.033 ± 0.005 mm and 

overall weight of 100 g/m 2 ± 10% 

Flexible Duct (561) "Supaflex 13 AP" Flexible Air Duct / the duct comprises of 

an insulation layer of glasswool (light yellow colour, 25 mm 

thick, 24kg/m 3 ) sandwiched between an inner core of 

aluminium/polyester laminate encapsulating spring steel 

wire helix and an outer aluminium/polyester vapour barrier. 

Flexible Duct (587) "SK Kicflex" Aluminium Flexible Air Duct, Model "KIC- 

8000", 100mm to 200mm, a) An inner core fabricated from 

aluminium foil laminated with PET and aluminium foil with 

steel wire inserts, b) A core of fibre glass insulation with a 

thickness of 25mm and density of 24kg/m 3 , c) An outer 

jacket comprising aluminium foil laminated with PET. 

(8) Energy Recovery Units 

Energy Recovery Wheel (383) Airxchange / "ECR" Series as listed in the UL Certifications 

Directory, File No.: SROT2.SA9792 / the energy recovery 

wheel is constructed of silica gel desiccant bounded light 

weight polymer media mounted on a stainless steel rotor. 

For wheels of diameter greater than 26 in., the media shall 

be mounted in the form of removable segments. 



Dongguan Juwun Rubber & Plastic 

Products Co. Ltd., PRC 


Products Co. Ltd., PRC 

15/4/2011 December 2015 a) No assessment was made on the 



condition. b) The Brand name and 

model number should be marked on 

the product. 

23/6/2011 April 2016 No assessment was made on the 



condition. 

Delta Duct Systems Ltd., PRC 12/12/2011 December 2014 a) No assessment was made on the 


generated by the product under fire. b) 

The word "SUPAFLEX" is to be 

marked on the outer surface of the 

product at approx. 1,000 mm interval 

for product identification. 

SK Kicflex Co. Ltd. PRC 19/6/2012 September 2013 a) No assessment was made on the 



Airxchange Inc., USA 24/7/2009 July 2014 a) No assessment was made on the 


generated by the core material under 

fire condition. B) The product shall 

remain UL listed and bear the 

appropriate marking 

page24/40

Energy Recovery Wheel (456) EcoFresh / "EcoFresh" HWR Series heat recovery wheel / 

A rectangular galvanized steel enclosure containing a belt 

driven metallic spoke housing removable sectors of core 

material for heat/humidity exchange. The core material is 

desiccant - "Molecular Sieve 3A (Ecosorb 300)" coated on 

a corrugated aluminium foil substrate 

Energy Recovery Ventilator 

(508) 



"STC-EHRV" Energy Humidity Recovery Ventilator / "RP" 

Series / An internally insulated rectangular galvanized steel 

enclosure containing a belt driven stainless steel rotary 

wheel housing six removable sectors of core material for 

heat/humidity exchange. The core material is packed 40 

mm thick polyester (PE) fiber of 25 - 150 micrometer 

diameter with a surface density of 3.6 kg/m 2 . Two sets of 

aluminium pre-filters are fitted on the air inlets of the unit. 

Unit Size : 2,000m 3 /h to 40,000m 3 /h 

Desiccant Rotors International, 

India 

Hong Kong Stirling Ventilator Co., 

Ltd., PRC 

(9) Smoke Fans 

Smoke Fan (302) "F.LLI Ferrari"FR Series F.LLI Ferrari Ventilatori Industriali 

S.P.A., Italy 

Smoke Fan (404) Fantech / APS, SS, RSS and SSM Series of sizes from 315 

mm to 2,000 mm diameter / Heavy gauge mild steel and 

hot dip galvanized casing, axial fan comprising aluminum 

blade impeller; driven by high temperature rating electric 

motor manufactured by "TECO" or "CMG" (max. power 90 

kW) of insulation Class "H", 3 phases, 415V, 50 Hz supply 

Fantech Pty. Limited, Australia 

EltaFantech Asia Sdn. Bhd, 

Malaysia 

12/8/2010 Aug 2013 a) All electric cables installed inside 

the product and exposed to the air 

stream are to be contained in flexible 

metal conduit. B) Valid test report 

shall be made available on request to 

demonstrate that the internal 

insulation, if any, used in the product 

can comply with the requirement of 

having an overall fire propagation 

index I < or = 6 when tested in 

accordance with BS 476 Part 6: 1989. 

18/3/2011 March 2015 a) No assessment was made on the 


generated by the core material under 

fire condition. b) All electric cables 

installed inside the ventilator are to be 

contained in flexible metal conduit. c) 

Valid test report shall be made 

available on request to demonstrate 

that the internal insulation used in the 

ventilator can comply with the 

requirement of having an overall fire 

propagation index I � 12, sub-index i 1 � 

6 when tested in accordance with BS 

476 Part 6:1898. 

31/7/2008 August 2012 

7/1/2010 June 2012 A valid " Certificate for Quality 

Management System" shall be 

maintained 

page25/40

Smoke Fan (431) Flakt Woods / As listed in the Appendix to BSRIA 

Performance Certificate No. C18421/1, Issue 4 of 

29.04.2010, but only limited to those with temperature and 

time categories equal to or better than 250 o C and 1 hour / 

Circular axial flow fan incorporating inlet and outlet flanges; 

fan impeller is of die cast aluminium alloy with a totally 

enclosed induction motor of an insulation grade selected to 

meet specific performance requirements 

Smoke Fan (458) Wolter / a) JFUO and JFRO Series - Impeller diameter 

300mm to 355mm, b) AXV Series - Impeller diameter 

315mm to 1600mm, c) RVHT Series - Impeller diameter 

355mm to 710mm 

Smoke Fan (492) Kruger "TDA-F" Smoke Spill Axial Fan for Smoke 

Extraction System / Smoke Spill Axial Fan a) TDA 400-F b) 

TDA 630-F c) TDA 900-F d) TDA 1400-F Axial fan 

comprising aluminium fan blades of manually adjustable 

pitch, mild steel or galvanised steel flanged casing and 

driven by "kruger" high temperature resistance Class "H" 

electric motor 

Smoke Fan (494) Witt & Sohn "KWJ" Smoke Spill Axial Fan for Smoke 

Extraction System / "Witt & Sohn" Reversible Smoke Spill 

Axial Fan a) KWJ 630 (with 7.5 kW, 2P motor) b) KWJ 

1120 (with 37kW, 4P motor) Axial fan comprising 

aluminium fan blades of manually adjustable pitch, 

galvanised mild steel flanged casing and driven by "kruger" 

high temperature resistance Class "H" electric motor 

Smoke Fan (496) Witt & Sohn "TSS 1800" Smoke Spill Axial Fan for Smoke 

Extraction System / Witt & Sohn "TSS 1800" Reversible 

Smoke Spill Axial Fan (with 150 kW, 6P motor) / Axial fan 

comprising aluminium fan blades of manually adjustable 

pitch, galvanised mild steel casing driven by "Kruger" high 

temperature Class 'H' electric motor 



The Flakt Woods Group, U.K. 11/5/2010 April 2013 The family of "JM Aerofoil HT" Series 

fans shall bear an appropriate 

identification mark for the identification 

of time / temperature categories. 

Walter GmbH Maschinen-und 

Apparatebau KG, Germany 

Kruger Ventilation Industries Pte. 

Limited, Singapore 

Kruger Witt Asia Industries Pte. 


Kruger Witt Asia Industries Pte. 


24/8/2010 August 2015 a) Valid "EC - Certificate of 

Conformity" shall be maintained for the 

fan models, b) A valid certificate for 

quality management system shall be 

maintained. 

1/2/2011 February 2015 The fans shall bear appropriate labels 

for the identification of time / 

temperature categories. 







page26/40

Smoke Fan (511) Kruger "BSB" Type F Smoke Spill Centrifugal Fan for 

Smoke Extraction System / Smoke Spill Centrifugal Fan 

(Type F) a) BSB 355 (with 1.1 kW, 4P motor), b) BSB 630 

(with 3.0 kW, 4P motor), c) BSB 1120 (with 18.5 kW, 4P 

motor) / Centrifugal fan comprising mild steel backward 

curved impeller and a galvanized sheet steel casing with 

inlet and outlet flanges. The fan is belt driven externally by 

"Kruger" high temperature resistance Class "F" electric 

motor. 

Smoke Fan (530) "Wolter" Axial Fan / AXV Series - Size 335 mm to 1,250 

mm / The fans are driven by IP55 single or two-speed high 

temperature motor of insulation class "H" by either 

"Siemens", "CMG", "WEG", "TECO", "ABB" or "Wolter 

(OEM)". The moters can be of 2/4/6/8 poles and operate 

on either 220V, 380V or 415V, 50 Hz supply. 

Smoke Fan (542) "Fläkt Woods" JM Aerofoil H.T. Series Axial Fan for Smoke 

Extraction System / JM Aerofoil H.T. Series as listed in the 

supplementary information sheets to EC-Certificate of 

Conformity No. 0086-CPD-474878 of 27.10.2010, but only 

limited to those with temperature/time classification equal to 

or better than 250 o C and 1 hour (i.e. F300 or better). 

Smoke Fan (557) "Elta" Axial Fan / Smoke Vent Series as listed in the 

supplementary information sheet to EC-Certificate of 

Conformity No. 0086-CPD-493001 of 20.8.2008, but only 

limited to those with temperature/time classification equal to 



Kruger Ventilation Industries Pte. 


Wolter GmbH Maschinen-und 

Apparatebau KG, Germany 

12/4/2011 April 2015 The fans shall bear appropriate labels 



5/7/2011 July2016 a) Valid "EC-Certificate of Conformity" 

shall be maintained for the fan models. 

b) A valid certificate for quality 

management system shall be 

maintained. 

Fläkt Woods Limited, UK 18/8/2011 August 2016 a) The family of "JM Aerofoil HT" 

Series fans shall bear the appropriate 

markings for the identification of 

temperature/time classification. b) This 

letter supersedes our letter of the 

same series dated 11.5.2010 on the 

same product series. 

Elta Fans Limited, U.K. 2/11/2011 November 2016 The family of "Smoke Vent" Series 

fans shall bear the appropriate "CE" 

markings for the identification of 

temperature / time classification. 

400 o Smoke Fan (572) 

C and 2 hour (i.e. F400) 

"Systemair" AR Axial Smoke Extraction Fan a) AR/AJR 

315-2 F300 with "ATT" 1.1kW motor b) AR 1250-4/16 

D4(F400) with "ATT" 15kW motor Type and Size: Axial fan 

of 315mm and 1,250mm diameter 

Systemair Sdn. Bhd., Malaysia 8/3/2012 March 2017 

(10) Thermal / Acoustic Insulations 

Thermal Insulation (Accessories) Foster 30-80 - Vapor Safe Coating, Colour in White Foster Products Corporation 12/11/2002 November 2012 

Thermal Insulation KNAUF-Rock wool Knauf Singapore Pte Ltd. 4/9/2002 May 2012 

Thermal Insulation (207) ' Armacell Armaflex' 6mm, 9mm, 13mm, 19mm, 25mm, Armacell (Guangzhou) Limited, 

17/5/2007 May 2012 

32mm, 40mm & 50mm thick Class 1 Elastomeric Nitrile 

based Insulation for Ductwork and Pipwork in Ventilation 

Installation 

P.R.C. 

Thermal Insulation (215) "Kooltherm" Phenolic Foam Thermal Insulation , 20mm - 

60mm thick with nominal density of 35kg/m 3 

Kingspan Insulation Ltd., U.K. 12/7/2007 July 2012 

page27/40

Thermal Insulation (220) "PHENOTHERM" Phenolic Foam Insulation with "Antiblaze 

990" Aluminium Foil Facing 




Products Co., Ltd, PRC 

13/8/2007 August 2012 

Thermal Insulation (225) "GOODEVER PF" Phenolic Foam Insulation Beijing Goodever Xinxing Building 

Material Co., Ltd, Shenzhen 

Branch, PRC 

21/9/2007 March 2016 

Thermal Insulation (264) "Phenotherm" Phenolic Foam Insulation density 80kg/m 3 & 

120kg/m 3, 25mm thick "PAL ® Dongguan Juwun Rubber & Plastic 20/3/2008 March 2013 

DSF 818" with Aluminium Foil 

Facing 

Products Co., Ltd, PRC 

Acoustic Insulations (277) Foster 32-14 Duct Fas - High VelocityDuct Sealant Foster Products Corporation, USA 19/5/2008 May 2013 

Thermal Insulation (278) "Durkflex-FG" Electromeric Nitrile Insulation Material 

density 65kg/m3; thickness 25mm & 32 mm 

Thermal Insulation (305) "PAL ® " IA 811 and IA 911 - apply for fixing of insulation to 

ductwork and pipework 

Thermal Insulation (312) "Thermobreak" Thermal Insulation for HVAC System, a 

closed cell polyethylene foam insulation material with a 

reference colour of (black) charcoal grey, in roll or sheet 

form, reinforced with aluminium foil facing on one side and 

G60 acrylic PAS adhesived 

Thermal Insulation (322) "PHENOTHERM" / A composite insulation material 

comprising "Phenotherm" CFC and HCFC free closed cell 

phonolic foam faced with "PAL DSF-White 818" (9-layers) 

double sided reinforced aluminium foil vapour barrier / 40 

kg/m 3 ; 25 mm thick 

Durkfee (Wuhan) Insulation 

Material Co., Limited, PRC 

Thermal Insulation (327) "Bradford" Fibertex Rockwool Insulation material CSR (GuangZhou) Building 

Materials Co., Ltd., PRC 

Thermal Insulation (323) PIP ALU / A 20 mm thick polyisocyanurate foam having a 

nominal density of 35 - 45 kg/m3 faced on both sides with 

embossed aluminium foil of 60 - 80 microns thick. One of 

the aluminium surfaces is lacquer coated and the other is 

coated with an epoxy based 

Thermal Insulation (349) Insulflex / Black coloured NBR, PVC closed cell elastomeric 

nitrile rubber insulation material 

Thermal Insulation (364) Superion / 13 mm / A black colour flexible closed cell 

elastomeric nitrile foam insulation material having a density 

of 60 - 80 kg/m3 

Thermal Insulation (371) PAL R XDF 22/280 o C / Black polymeric coated textile-glass 

material 680 g/m 2 ; 0.5 mm thick 

26/5/2008 April 2012 

Phenotherm Asia Limited 5/8/2008 August 2013 

Sekisui Pilon Pty. Ltd., Australia 4/9/2008 September 2013 

Phenotherm Asia Limited, PRC 22/10/2008 October 2013 No assessment was made on the 


generated by the material under fire. 

Poliuretanos S.A Camino 

Matamala s/n, Spain 

29/10/2008 October 2012 Test Standard BS 476 Part 4 : 1970 

22/10/2008 October 2012 

Insulflex Sdn Bhd, Malaysia 19/2/2009 February 2012 no assessment was made on the 



condition. 

Superion Worldwide Sdn. Bhd., 

Malaysia 

29/4/2009 April 2014 no assessment was made on the 



condition. 

Phenotherm Asia Limited, PRC 11/6/2009 June 2014 no assessment was made on the 



condition. 

page28/40

Thermal Insulation (372) CAPAPHEN-K / "CAPAPHEN-K" Phenolic Foam / CFC free 



phenolic foam with a nominal density of 40 kg/m 3 and 

laminated on one face with a double-sided aluminium foil 

Thermal Insulation (375) Owens Corning / Owens Corning Fiberglass Duct Liner / 

Glasswool duct liner board covered on one side with Glass 

Cloth 7628 

Thermal Insulation (393) Isoline / 9mm, 19mm and 25mm thick, 65 to 80 kg/m 3 / a 

black colour nitrile rubber based closed cell elastomeric 

foam insulation in sheet or tube form 

United Regent International 

Limited., PRC 

Owens Corning (China) Investment 

Co., Ltd., PRC 

Thermal Insulation (397) PHENOTHERM / 40 kg/m 3 ; 25 mm thick / a composite Dongguan Juwun Rubber & Plastic 

insulation material comprising "Phenotherm" CFC and 

HCFC free closed cell phenolic foam faced with "PAL*DSF- 

Black 818" (9-layers) double sided reinforced aluminium foil 

vapour barrier 

Products Co., Ltd., PRC 

Thermal Insulation (400) UniFiber / fiberglass with "PAL R " SSF 515 aluminium foil 

facing / 25 mm / 32 kg/m 3 and 25 mm / 64 kg/m 3 

Thermal Insulation (417) FiberCoat / Nylon 66 / Short Nylon 66 fibre having an 

norminal length of 0.4 mm bonded to hot dip galvanized 

steel sheet by a water based adhesive through an 

elestrostatic flocking process 

11/6/2009 June 2014 no assessment was made on the 



condition. 




L'Isolante K-Flex, Srl, Italy 14/9/2009 September 2014 no assessment was made on the 



condition. 

2/11/2009 November 2014 no assessment was made on the 



condition. 

UniFiber Manufacturing Ltd., PRC 1/12/2009 December 2012 no assessment was made on the 



condition. 

Shenzhen Catic & Tai Kee (E&M) 

Ltd. and WuXi XinDaZhong Steel 

Sheet Co., Ltd., PRC 

Thermal Insulation (435) Lucky-PIP / CFC, HCFC, HCF Free Pre-insulated Pipe / 

Piping system comprising a basic carrier pipe, a metal 

outer jacket of minimum 0.5 mm thick galvanized steel 

sheet and an insulation of 35 mm thick polyurethane foam 

(48 kg/m 3 Link The Best Company Limited, 

) machine-injected between the carrier pipe and 

outer jacket. Other information on wall penetration to the 

whole assembly is supported by mild steel brackets on both 

sides of the wall, pipe clamp and with the annular gap 

between the metal outer jacket and the wall tightly packed 

by ceramic fibre insulation with a quality equivalent to 

"Super Wool 607 Thermal Ceramics" 

Hong Kong 

Thermal Insulation (442) UltimateAir / P.E. fibre thermal wheel / A grey colour 

packed polyester (PE) fibre material of 35 - 40 mm thick 

with a density of 96.3 - 104 kg/m 3 for use in a heat recovery 

device. 

Qiqihaer UltimateAir Ventilation 

Equipment Co., Ltd. PRC 

14/4/2010 April 2013 no assessment was made on the 



condition 



generated by the assembly under fire 

condition 




condition. 

page29/40

Thermal Insulation (459) T-Max / Polyester insulation layer faced on one side with 

aluminium foil 

Thermal Insulation (460) Phenotherm TM / Phenotherm TM phenolic foam / A 

composite insulation panel comprising a phenolic foam 

core having a density of 60 kg/m 3 bonded on both sides 

with embossed aluminium foil of a thickness > or = 0.05 

mm using PAL LA811 adhesive 

Thermal Insulation (471) "OPS" Rigid Insulation Ring / Split composite insulation ring 

comprising rigid fire retarded polyurethane, laminated with 

0.3 mm thick double-sided aluminium foil as vapour barrier 

and protected by 0.8 mm thick galvanized iron sheet jacket 

Thermal Insulation (472) "UniFiber R " Fiberglass with Black Glass Tissue (BGT) 

Facing / Fiberglass faced on one side with black glass 

tissue / 25 mm / 32 Kg/m 3 

Thermal Insulation (474) Pilon "Thermobreak" Thermal Insulation / A closed cell 

polyethylene foam insulation material with a reference 

colour of (black) charcoal grey, in roll or sheet form. 

Reinforced with aluminium foil facing on one side and G60 

acrylic PAS adhesive backing. 

Acoustic insulation (476) "Pyrotek" Wavebar Quadzero Noise Barrier/A 4mm thick 

black flexible aluminium foil faced polymer backed by a 

white nonwoven polyester fabric/8.14kg/m 2 /for external 

acoustic insulation of duckwork 

Thermal Insulation (479) "Teembase" Pre-insulated Pipe System / Piping system 

comprising a basic carrier pipe, a metal outer jacket of 

minimum 0.6 mm thick stainless steel (Grade 304), 

galvanized steel or aluminium sheet and an insulation of 15 



- 75 mm thick polyurethane foam (48 kg/m 3 ) machineinjected 

between the carrier pipe and outer jacket. 

Thermal Insulation (482) "GOODEVER PF" Phenolic Foam Insulation / Phenolic 

foam insulation with a density of 40 kg/m 3 bonded on one 

side with 0.22 mm "S-series" thick doubled sided aluminum 

facing material using PS 8109S adhesive / thickness: 15 

mm - 75 mm 

Hueintek Inc., S. Korea 27/8/2010 August 2013 No assessment was made on the 



condition.. 



27/8/2010 August 2015 No assessment was made on the 



condition.. 

Oxprime (International) Ltd., PRC 11/10/2010 October 2013 no assessment was made on the 



UniFiber Manufacturing Ltd., PRC 18/10/2010 October 2013 no assessment was made on the 



condition. 

Sekisui Pilon Pty. Ltd., Australia 10/11/2010 September 2013 Test of the material for smoke 

generation according to ISO 5659-2 

(1994) under fire condition was carried 

out by SP Swedish National Testing 

and Research Institute with test report 

referance P200245 dated 13.2.2002 

as a reference. 

Pyrotek Pty. Ltd., Australia 6/12/2010 December 2013 no assessment was made on the 



condition. 

Teembase Development Limited, 

PRC 

Shenzhen Goodever Xinxing 

Building Material Co., Ltd., PRC 



generated by the assembly under fire. 

b) A valid assessment report on the 

wall penetration seal shall be 

maintained. 

23/12/2010 September 2015 no assessment was made on the 



page30/40

Thermal Insulation (483) "FOCUS" Phenolic Foam Insulation / Phenolic foam with 

nominal density of 40 kg/m3 and faced on one side with a 

layer of reinforced aluminium foil laminate, "Sisalation 450" 

by "PLI A911" acetone based synthetic type adhesive / 

thickness: 25 mm 



Zhongshan Focus Insulation 

Material Factory (聚能新型保溫建 

材厂), PRC 

Acoustic insulation (484) "Sargents" SILduct Duct Mounted Attenuators / 0.55 mm Luen Wah Machine Welding 

thick perforated galvanized sheets front and back skins with Factory, PRC 

fibreglass wool infill material wrapped by a 23 micron 

"Melinex" film; 0.8 mm thick galvanized steel sheet 

perimeter casing 

Thermal Insulation (485) ATC "PD5020-80/80" Sandwich Air Duct Panel / A 

composite insulation panel comprising a core of 

polyisocyanurate foam having a nominal density of 48-52 

kg/m 3 with 80 micron thick aluminium foil bonded to each 

face 

Thermal Insulation (487) "Piral MD Hydrotec" Air Duct Panel / 15HB21 Piral MD 

Hydrotec / A 20 mm thick foam board comprising a core of 

polyurethane foam of density 44 kg/m 3 with 60 micron thick 

aluminium foil bonded to it on both faces 

Acoustic insulation (489) "AES" Rectangular Acoustic Attenuator / The casing is 

constructed from 0.8 mm to 1.6 mm thick galvanized steel 

plate with a folded joint along one edge of the unit sealed 

with silicone mastic sealant. The splitter is fabricated from 

0.8 mm thick galvanized perforated steel sheet with "Owens 

Cornings" glass fibre (glasswool blanket laminated with 

FSK (Lamtec-R3035) of density 40 kg/m 3 Acoustic Engineering Services 

packed under 

10% compression as the infill material. 

(UK) Ltd., PRC 

Thermal Insulation (497) "Insutech-PIP" Pre-insulated Pipe System / Piping system 

comprising a basic metal carrier pipe, a metal outer jacket 

of 0.6 mm thick galvanized steel and an insulation layer of 

50 mm thick polyurethane foam (48 kg/m 3 ) machineinjected 


29/12/2010 January 2014 no assessment was made on the 



7/1/2011 January 2016 a) The fibreglass wool infill material of 

the attenuator shall be of a type 

conforming to the requirements for 

internal insulation stipulated in Part XI 

of the FSD Circular Letter No. 4/96. 

Air Trade Centre Limited, PRC 14/1/2011 July 2015 a) no assessment was made on the 



b) the insulation panel should be 

marked with "PD5020-80/80" 

P3 Srl, Italy 18/1/2011 September 2014 no assessment was made on the 



Bun Kee Building Materials 

(Guangzhou) Co., Ltd., PRC 

24/1/2011 December 2012 The glasswool infill material of the 

attenuator shall conform to the 

requirements for internal insulation 

stipulated in Part XI of the FSD 

Circular Letter No. 4/96. 

18/2/2011 February 2016 a) No assessment was made on the 



b) Valid assessment report on the 

integrity of wall penetration seal to BS 

476: Part 20 shall always be made 

available. 

page31/40

Thermal Insulation (501) "Lucky-PIP" Pre-insulated Pipe System (CFC, HCFC, HCF 

Free) / "Lucky-PIP" (CFC, HCFC, HCF Free) Pre-insulated 

Pipe (Grade 316 stainless steel jacket) / Piping system 

comprising a basic carrier pipe, a metal outer jacket of 

minimum 0.5 mm thick Grade 316 stainless steel sheet and 



an insulation of 35 mm thick polyurethane foam (48 kg/m 3 ) 

machine-injected between the carrier pipe and outer jacket. 

Thermal Insulation (503) "UniFiber ® " Fiberglass with PAL ® DSF 818 Aluminium Foil 

Facing / "UniFiber ® " fiberglass with "PAL ® DSF 818" 

aluminium foil facing / Fiberglass faced on one side with 

"PAL® DSF 818" double sided aluminium foil facing / 

Thickness / Density : 25 mm / 32 kg/m 3 

Thermal Insulation (504) "Armaflex Duct" Nitrile Based Elastomeric Insulation 

Material / Armaflex Duct Thickness 25 mm / "Armaflex" 

closed cell nitrile based elastomeric insulation material, 

having a density of 46 to 47 kg/m 3 , with glass fabric 

reinforced aluminium foil facing on one side. 

Acoustic Insulation (509) "Wilhams" Acoustic Noise Barrier Mat / "Wilhams" Type 

WB 5 / A 3 mm thickblack barium sulphate loaded 

thermoplastic polymer faced on one side with glass 

reinforced aluminium foil / Density 5.0 Kg/m 2 . 

Thermal Insulation (514) "K-Flex ST" Class 0 Elastomeric Insulation Material for 

Insulation of Ventilation Ductwork or Pipework / "K-Flex ST" 

/ Black colour closed cell, nitrile rubber based elastomeric 

insulation foam product having a density of 45-65 Kg/m 3 . 

Thermal Insulation (519) "P-flex" Flexible Elastomeric Closed Cell Insulation / P-flex 

® " / A black colour CFCs and HCFCs free flexible 

elastomeric closed cell insulation material having a nominal 

density of 80 kg/m 3 / 9mm, 13mm, 19mm and 25mm 

Acoustic Insulation (520) "Best Bond" FHPEVA Insulation Ring / Split composite 

insulation ring comprising high pressure foamed, high 

density polyethylene vinyl acetate (PEVA) / 560 kg/m 3 / As 

external insulation ring for pipe work 

Link The Best Company Limited, 

Hong Kong 

1/3/2011 March 2016 no assessment was made on the 



UniFiber Manufacturing Ltd., PRC 7/3/2011 March 2014 no assessment was made on the 



Armacell (Guangzhou) Limited, 

P.R.C. 




Wilhams Insulation Ltd., U.K. 11/4/2011 April 2014 no assessment was made on the 



condition 

L'Isolante K-Flex, Srl, Italy (PRC 

made) 





generated by the material under fire. b) 

The product shall bear the marking 

"CL 1 DM 26.6.84" for identification 

purpose. 




condition. 

Meriton East (HK) Ltd., PRC 1/6/2011 June 2014 no assessment was made on the 



page32/40

Thermal Insulation (522) "Insutech-PIP" Pre-insulated Pipe System / Piping system 

comprising a basic metal carrier pipe, a metal outer jacket 

of 0.6 mm thick galvanized steel, 0.8 mm aluminium sheet 

or 0.6 mm thick Grade 316 or Grade 304 stainless steel 

sheet and an insulation layer of 50 mm thick rigid 

polyurethane foam (48 kg/m 3 ) machine-injected between 

the carrier pipe and outer jacket. 

Thermal Insulation (527) "BBS" Rockwool Insulation / A yellowish brown mineral 

wool sheet having a nominal density between 40 kg/m 3 and 

150 kg/m 3 

Thermal Insulation (531) "Durkflex� FG" Nitrile Rubber Insulation / Durkflex� FG / 

Closed cell nitrile based elastomeric insulation material, 

having a density of 60-80 kg/m 3 and with a colour reference 

"Black" Thickness : 9 mm and 13 mm 

Thermal Insulation (532) "COLAN" AF406/Silicone Glass-Fibre Fabric as Flexible 

Connector in Ventilation/Smoke Extraction System / 

"COLAN AF406/Silicon" Glass-fibre fabric / A woven 

fibreglass fabric with silicon rubber coating on both sides, 

having a nominal thickness of 0.46 mm and a normal 

weight of 543 g/m 2 and with a standard reference colour 

grey. 

Thermal Insulation (534) "PAL�" DF16 Class '0' Duct Fabric / "PAL� DF 16 Class '0' 

/ A black polymeric coated textile-glass material with an 



nominal thickness of 0.4 mm and weight of 550 g/m 2 . 

Thermal Insulation (536) "AFICO" Type 320 Faced Duct Wrap / "AFICO" Faced Duct 

Wrap, Type 320 / A uniformly textured inorganic glass 

fibers bonded together by a thermosetting resin and faced 

on one side with aluminium foil facing Thickness (mm) / 

Density (kg/m 3 ) : 25 mm / 32 kg/m 3 

Thermal Insulation (539) "Owens Corning" Fiberglas� All-Service Duct Wrap / 

Fiberglas� All-Service Duct Wrap with Heatshield 730 / 

Fiberglass blanket insulation material laminated on one 

side with Heatshield 730 (a 9-layer reinforced doubled 

sided aluminium foil) Density: 32 kg/m 3 Thickness 25 and 

50 mm 

Bun Kee Building Materials 

(Guangzhou) Co., Ltd., PRC 

Best Building Suppliers Co., Ltd. 

PRC 

Durkee (Wuhan) Insulation Material 



Australia 



Arabian Fiberglass Insulation 

Company Ltd., Saudi Arabia 

9/6/2011 June 2016 a) No assessment was made on the 



b) Valid assessment report on the 

integrity of wall penetration seal to BS 

476: Part 20 shall always be made 

available. c) This letter supersedes our 

previous letter of the same series 

dated 18.2.2011 on the same product. 




5/7/2011 July 2016 a) No assessment was made on the 



The material shall bear the marking 

"Durkflex� FG" as a means of 

identification. 




The product shall have label tag(s) 

bearing the word "AF 406 SIL" sewn 

on it as a means of identification. 




condition. b) The brand and model 

name should be marked on the 

product. 

4/8/2011 August 2016 a) No assessment was made on the 



The material shall be installed with the 

foil face exposed. 

Owens Corning China, PRC 12/8/2011 August 2014 No assessment was made on the 



condition. 

page33/40

Thermal Insulation (550) "AFICO" Duct Liner for Ventilation Ducts / "AFICO" Duct 

Liner, Type 320 / Uniformly textured inorganic glass fibers 

bonded together by a thermosetting resin and faced with a 

black glass tissue thickness (mm)/Density (KG/m 3 ) :25 mm 

/ 32 kg/m 3 

Thermal Insulation (552) "Evertherm" Phenolic Foam Insulation Material with 

Aluminium Foil Facing / "Evertherm" Phenolic Foam with 

aluminium foil facing / Grey colour closed cell rigid phenolic 

foam insulation material with aluminium foil facing and 

having a density of 40 kg/m 3 

Acoustic Insulation (553) Owens Corning "QuietR" Acoustic Duct Liner / QuietR 

Acoustic Duct Liner - Type 200 / A resin bonded fiberglass 

blanket faced on one side with acrylic composed carbon 

black bound fiberglass veil having a density and a thickness 



of 32 kg/m 3 and 25 mm respectively. 

Acoustic Insulation (555) LAH Glass Wool / A yellowish fiberglass board / blanket of 

50 mm thick and density 48 kg/m 3 / As internal acoustic 

lining of ductwork 

Thermal Insulation (558) "Lucky-PIP" Pre-insulated Pipe System / CFC Free Preinsulated 

Pipe 

Thermal Insulation (559) "Evertherm" Phenolic Foam Insulation Material with Silver 

Embossed Aluminium Foil Facing / "Evertherm" Phenolic 

Foam with "Evertherm 980S" silver embossed aluminium 

foil facing / Grey colour closed cell rigid phenolic foam 

insulation material with a silver aluminium foil facing and 

having a density of 40 kg/m3 

Thermal Insulation (560) "Superlon" Elastomeric Nitrile Insulation Material / a black 

colour flexible closed cell elastomeric nitrile foam material 

Thermal Insulation (562) "UniFiber�" Rockwool Insulation /Rockwool without facing 

/ Thickness / Density : 50 mm / 140 Kg/m 3 



Evertherm Insulation Hong Kong 

Ltd., HK (with phenolic foam from 

PRC) 

21/9/2011 September 2016 a) No assessment was made on the 



The material shall be installed with the 

black glass tissue exposed to the air 

stream. 

27/9/2011 September 2014 No assessment was made on the 



Owens Corning, USA 3/10/2011 October 2014 No assessment was made on the 



condition. 

Luen Wah Machine Welding & Iron 

Works Co., Ltd, PRC 


Hong Kong 

Evertherm Insulation Hong Kong 

Ltd., HK (with phenolic foam from 

PRC) 

Superlon Worldwide Sdn. Bhd., 

Malaysia 

18/10/2011 October 2014 No assessment was made on the 



condition. 

6/12/2011 August 2016 No assessment was made on the 



conditions. 

9/12/2011 December 2014 No assessment was made on the 






conditions. 

UniFiber Manufacturing Ltd., PRC 16/12/2011 December 2016 a) No assessment was made on the 



The product itself has no markings. 

Howerver, details such as brand 

name, density and thickness are to be 

marked on its packing. 

page34/40



Thermal Insulation (563) "Lucky-PIP" Pre-insulation Pipe System (Grade 304 

Stainless Steel Jacket) / "Lucky-PIP" CFC Free Preinsulation 

Pipe (Grade 304 Stainless Steel Jacket) / Piping 

system comprising a basic carrier pipe, a metal other jacket 

of minimum 0.5 mm thick Grade 304 stainless steel, and an 

insulation of 35 mm thick polyurethane foam (48 kg/m 3 Link The Best Company Limited, 

) 


Hong Kong 

Thermal Insulation (564) "Lucky-PIP" Pre-insulation Pipe System (Grade 316 

Stainless Steel Jacket) / "Lucky-PIP" CFC Free Preinsulation 

Pipe (Grade 316 Stainless Steel Jacket) / Piping 

system comprising a basic carrier pipe, a metal other jacket 

of minimum 0.5 mm thick Grade 316 stainless steel, and an 

insulation of 35 mm thick polyurethane foam (48 kg/m 3 Link The Best Company Limited, 

) 


Hong Kong 

Thermal Insulation (565) "AFICO" Fibreglass Duct Wrap (with PAL� DSF 818 Class 

0, Double Sided Aluminium Foil Facing) for Ventilation 

Ducts / "AFICO" Faced Duct Wrap / "AFICO" glasswool 

laminated on one side with PAL� DSF 818 Class 0, 8-layer 

double sided reinforced aluminium foil facing / Thickness / 

Density : 25 mm / 48 kg/m 3 

Thermal Insulation (567) "Insulflex" Closed Cell Nitrile Rubber Insulation Foam / 

"Insulflex" / Black coloured closed cell nitrile rubber 

insulation material / Thickness and Density : 25 mm, 100 

kg/m 3 

Acoustic Insulations (568) PAL� "IS918WB" Class '0' Sealant / PAL� "IS918WB" / A 

water based industrial sealant with a grey colour 

Thermal Insulation (570) "Infung" Phenolic Foam Insulation / A CFC/HCFC free 

phenolic foam material faced with 0.2 mm thick aluminium 

facing foil Density : 40 kg/m 3 Thickness :15 mm - 75 mm 

Thermal Insulation (574) "Lucky-PIP" (CFC, HCFC, HCF Free) Pre-insulated Pipe 

(Aluminium jacket) / Piping system comprising a basic 

carrier pipe, a metal outer jacket of minimum 0.6 mm thick 

aluminium sheet and an insulation of 35 mm thick 

polyurethane foam (48 kg/m 3 ) machine-injected between 

the carrier pipe and outer jacket. 



Insulflex Corporation Sdn Bhd, 

Malaysia 



generated by assembly under fire. b) 

Document demonstrating that reports 

WF No. 173898 and WF No. 173897 

remain valid shall be made available 

for inspection upon request. 



generated by assembly under fire. b) 

Document demonstrating that reports 

WF No. 173898 and WF No. 173897 

remain valid shall be made available 

for inspection upon request. 

9/1/2012 January 2017 No assessment was made on the 



20/1/2012 January 2017 No assessment was made on the 



condition. 

Phenotherm Asia Ltd., PRC 1/2/2012 February 2017 No assessment was made on the 



condition. 

Jiangmenshi Xinhuiqu Huicheng 

Infung Insulation Material Factory 

(江門市新會區會城盈豐保溫材料 

廠), PRC 


Hong Kong 

10/2/2012 July 2013 No assessment was made on the 



conditions. 




page35/40

Thermal Insulation (575) "Lucky-PIP" CFC Free Pre-insulated Pipe (Aluminium 

Jacket) / Piping system comprising a basic metal carrier 

pipe with an aluminium outer jacket of minimum 0.6 mm 

thick with interlocking seam and an insulation of 35 mm 

thick polyurethane foam (48 kg/m 3 ) machine-injected 





Hong Kong 

Thermal Insulation (577) "K-Flex ST" Class 0 Elastomeric Insulation Material for L'Isolante K-Flex, Srl, Italy (PRC 

Insulation of Ventilation Ductwork or Pipework / "K-Flex ST" 

/ Black colour closed cell, nitrile rubber based elastomeric 

insulation foam product having a density of 45-65 Kg/m3. 

made) 

Thermal Insulation (584) "Armacell Armaflex" / Class 0, closed cell, nitrile based Armacell (Guangzhou) Limited, 

flexible elastomeric insulation products (density between 40 

kg/m3 and 65 kg/m3) / Thickness: 6mm, 9mm, 13mm, 

19mm, 25mm, 30mm, 32mm and 50mm 

P.R.C. 

Thermal Insulation (591) "PAL ® SSF 515" Class '0' Aluminium Foil Vapour Barrier 

Laminated on top of Insulation for Ductwork and Pipe work / 

A 5-layer flame retarded tri-directional reinforced aluminium 

foil 

Thermal Insulation (593) "Certain Teed" Fiberglass Insulation Material / Certain Teed 

ToughGard T Textile Liner / A textile-type glass fibres 

bonded together with a thermosetting resin overlaid with a 

black matt tissue surface on the air stream side. Fiberglass 

material having a density and a thickness of 32 kg/m 3 and 

25 mm respectively. 







The product shall bear the marking 

"CL 1 DM 26.6.84" for identification 

purpose. 


smoke density and toxicity generated 

by the meterials under fire condition. 

Phenotherm Asia Limited, PRC 16/7/2012 July 2017 a) No assessment was made on the 



For phenoic foam insulation, the 

finished external insulation layer (i.e. 

insulation + "PAL® SSF 515" as 

vapour barrier) should comply with BS 

476 Part 7 (Class 1) c)The product 

shall bear the marking "CL 1 DM 

26.6.84" for identification purpose. 

Certain Teed Corporation, USA 21/8/2012 August 2017 a) No assessment was made on the 



conditions. b) The product itself has no 

marking, however details such as 

brand name, density and thickness are 

to be marked on its packing. 

page36/40

Thermal Insulation (594) "AFICO" Fiberglass Insulation / Fiberglass wool insulation 

with doubled sided aluminium foil vapour barrier / 


Thermal Insulation (597) "AmCoolong®" / Black coloured closed cell elastomeric 

foam insulation material / Thickness and Density : 19 mm, 

64 kg/m 3 



Arabian Fiberglass Insulation Co., 

Ltd., Saudi Arabia 

Long Mass Insulation Material 

Factory, PRC 

Thermal Insulation (601) "Lucky-PIP" CFC Free Pre-insulation Pipe (Galvanized Link The Best Company Limited, 

Steel Jacket) / Piping system comprising a basic steel inner Hong Kong 

pipe with a galvanized steel outer jacket of minimum 0.5 

mm thick with interlocking seam and an insulation of 

polyurethane foam machine-injected between the inner pipe 

Thermal Insulationl (602) 'Class 1 Armaflex' / Closed cell, nitrile based flexible 

elastomeric insulation products, having a density of about 

46 kg/m 3 and with a colour reference "Black" / Thickness: 6 

mm and 32 mm 

Thermal Insulation (605) "Byucksan rockwool" Thermal Insulation / Material A 

yellowish brown mineral wool sheet having a thickness of 

50mm and a nominal density of 100kg/m 3 

Thermal Insulation (606) "Owens Corning Fiberglass Insulation" FSK (Lamtec-3035) 

Faced Board/Pipe Type material / Density 32-64kg/m 3 

Thickness 25-50mm 

Thermal Insulation (607) "Owens Corning Fiberglass Insulation" FSK (Lamtec-3035) 

Faced Blanket Type material / Density 24-48kg/m 3 


Thermal Insulation (608) "Owens Corning Fiberglass Insulation" DSF (Lamtec-763) 

Faced Board/Pipe Type material / Density 32-64kg/m 3 


Thermal Insulation (609) "Owens Corning Fiberglass Insulation" DSF (Lamtec-763) 

Faced Blanket Type material / Density 24-48kg/m 3 


Armacell (Guangzhou) Limited, 

P.R.C. 

22/8/2012 August 2017 a) No assessment was made on the 



The product itself has no marking, 

however details such as brand name, 

density and thickness are to be 





conditions. b) The product shall bear 

the "AmCoolong®" marking.. 




7/9/2012 September 2017 no assessment was made on the 


generated by the materials under fire 

condition. 

Byucksan Co. Ltd., S. Korea 15/10/2012 June 2017 no assessment was made on the 



Owens Corning (Guangzhou) 

Fibreglass Co., Ltd., PRC 







22/10/2012 October 2017 no assessment was made on the 












page37/40

Thermal Insulation (610) "AmCoolong®" / Black coloured closed cell elastomeric 

foam insulation material / Thickness and Density : 25 mm, 

50-80 kg/m 3 

Thermal Insulation (611) K-Flex Class 1 / A closed cell, nitrile rubber based 

elastomeric insulation foam product with a colour reference 



black, Thickness ��50mm, 45 to 80 kg/m 3 / Application: for 

external insulation of ductwork or pipe-work 

Long Mass Insulation Material 

Factory, PRC 

L'Isolante K-Flex (Suzhou) Co., 

Ltd., PRC 

Thermal Insulation (616) "Isophen" CFC free phenolic foam Insulation / CFC free 

phenolic foam insulation material with aluminium foil facing 

/ Density and Thickness : of 40 kg/m 3 , 25 mm 

Thermal Insulation (623) "Durkflex FG" Closed Cell Elastomeric Nitrile Rubber 

Insulation Material / "Durkflex FG" / Black coloured closed 

cell elastomeric nitrile rubber insulation material / Thickness 

and Density : 25 mm, between 50 - 65kg/m 3 

Durkee (Wuhan) Insulation Material 


Thermal Insulation (624) "Kooltherm" Phenolic Thermal Insulation Material / 

Kooltherm / HCFC free, closed cell rigid phenolic foam 

insulation faced on one side with aluminium reinforced foil 

laminate by spray adhesive Density and Thickness: 40, 60, 

Isotherm Ltd., Hong Kong 27/11/2012 November 2017 

Kingspan Tarec Industrial 

Insulation N.V., Belgium 

22/10/2012 October 2017 a) No assessment was made on the 



conditions. b) The product shall bear 

the "AmCoolong®" marking.. 




condition. 




conditions b) The product shall bear 

the marking "Durkflex FG" as a means 

if identification 




80 and 120 kg/m 3 , 25mm 

(11) Miscellaneous 

Limit Thermostat Hi-Limit Thermostat - HLD (81) Supplier : HRW Limited 16/6/2005 

Duct Sealant (277) Foster 32-19 Duct Fas - Duct Sealant Foster Products Corporation 8/11/2002 November 2012 

Self-adhesive Foil Tape (366) PAL AT38 and AT38W / a) AT38 - High strength aluminium Phenotherm Asia Ltd., PRC 4/5/2009 May 2014 no assessment was made on the 

foil (38 micron) coated on one side with permanent 


synthetic rubber resin adhesive b) AT38W - High strength 


aluminium foil (38 micron) with a white surface finish on the 

external side and coated on the other side with permanent 

synthetic rubber resin adhesive 

condition. 

Sealant (376) PAL IS918 / Class '0' / A synthetic rubber based compound 

with a dark grey to black colour 

Aluminium Foil Tape (378) INFUNG / AF-045 / High strength aluminium foil (30 Micron) 

coated on one side with acrylic adhesive 

Phenotherm Asia Ltd., PRC 24/6/2009 June 2014 no assessment was made on the 



condition. 

Jiangyin Bond Tape Technology 

Corporation, PRC 

3/7/2009 July 2012 no assessment was made on the 



condition. 

page38/40

Sealant Tape (388) PAL R TC 98 / / A polymeric butyl rubber based compound 

with a dark grey to black colour 

116A Adhesive (438) Isobond 116A / For the bonding of insulation materials, e.g. 

fiberglass and phenolic foam, to metal ductwork in 

mechanical ventilation system 

Rubber Insulation Adhesive 

(448) 



PAL R 1A 911 WB / A water based synthetic elastomer 

adhesive with grey colour 

Self-adhesive Foil Tape (463) PAL AT38B / 38 micron thick aluminium foil coated on one 

side with synthetic rubber resin adhesive 

Phenotherm Asia Ltd., PRC 4/8/2009 August 2014 no assessment was made on the 



condition. 

Isotherm Ltd., PRC 8/6/2010 June 2013 no assessment was made on the 



condition. 

Phenotherm Asia Ltd., PRC 7/7/2010 July 2015 No assessment was made on the 



condition. 

Phenotherm Asia Ltd., PRC 8/9/2010 September 2015 no assessment was made on the 



condition. 

Aluminium Foil Tape (480) INSUL-PHEN "CW FRT" Aluminium Foil Tape / 30 micron INSUL-PHEN Insulation Ltd., PRC 22/12/2010 December 2015 no assessment was made on the 

thick aluminium foil coated on one side with flame-retardant 


acrylic adhesive / Sealing of joints in ventilation duct work 


or pipe work. 

condition. 

Aluminium Foil Tape (481) INSUL-PHEN "CW FRWT" Aluminium Foil Tape / 30 INSUL-PHEN Insulation Ltd., PRC 22/12/2010 December 2015 no assessment was made on the 

micron thick aluminium foil coated with white lacquer on 


one side and the other side with flame-retardant acrylic 


adhesive / Sealing of joints in ventilation duct work or pipe 

work. 

condition. 

Aluminium Foil Facing (503) "UniFiber ® " Fiberglass with PAL ® DSF 818 Aluminium Foil 

Facing / "UniFiber ® " fiberglass with "PAL ® DSF 818" 

aluminium foil facing / Fiberglass faced on one side with 

"PAL® DSF 818" double sided aluminium foil facing / 


UniFiber Manufacturing Ltd., PRC 7/3/2011 March 2014 no assessment was made on the 



BB388 Self Adhesive Aluminium "Best Bond" BB388 Self Adhesive Aluminium Foil Tape / Meriton East (HK) Ltd., PRC 30/5/2011 May 2014 no assessment was made on the 

Foil Tape (518) 

"Best Bond" BB388 / Bright aluminum foil with a nominal 


thickness of 30 micron coated with flame retardant acrylic 


adhesive 

condition. 

Aluminium Foil Facing (589) "UniFiber ® " Fiberglass Insulation with PAL ® DSF 818 

Double Sided Aluminium Foil Facing / "UniFiber ® " 

fiberglass with "PAL ® DSF 818" aluminium foil facing / 

Fiberglass wool insulation with doubled sided aluminium foil 

vapour barrier / Thickness/Density : 50 mm / 64 kg/m 3 

UniFiber Manufacturing Ltd., PRC 6/7/2012 July 2017 a) no assessment was made on the 



The product itself has no markings, 

however, details such as brand name, 

density and thickness are to be 


page39/40

Glass Tape as Gasket (595) "COLAN TTW 30" Glass Tape / a) 'E' type texturised yams 

b) 3mm thick & 50 mm wide c) Density of 2794kg/cu.m 

approx. 

Aluminium Foil Tape (598) "INFUNG" AF045 / High strength aluminium foil (30 micron) 

tape coated on one side with acrylic adhesive / Application: 

For the sealing of joints in ventilation system 




Australia 

Jiangyin BondTape Technology 

Corporation, PRC 

22/8/2012 August 2017 no assessment was made on the 



condition. 

23/8/2012 August 2017 no assessment was made on the 



condition. 

page40/40

Air Filters

Create successful ePaper yourself

Delete template?

Save as template?