Making Professional DVD from Authoring to ... - CD Duplication

When VirtualDub is opened you can see two screens as shown above. The left screen
represents the source file and the right screen represents the result of the editing. The
three controls we are going to use are i) the video play head, ii) the [Mark In] button, and
the [Mark Out] button. The other buttons are just there for you to navigate to the specific
point of the video but I found them less efficient as compared with moving the play head.
You can move the play head quickly along the timeline to get to any point very quickly.
By and large editing is a matter of trimming and rearranging of the video. To trim the
unwanted portion of the video you just move the play head to the beginning position where
you want the trimming to start; press the [Mark In] button to mark it, then move the play
head to the ending position where you want the trimming to stop; press the [Mark Out]
button. The time between the [Mark In] and [Mark Out] will be highlighted. You can either
press the [Delete] button on the keyboard to delete it or press [Ctrl-X] to delete it and put
it into the clipboard. By putting into the clipboard you can paste it to any place where the
play head is positioned.