ELSBETT pick-up conversion kits

ELSBETT Technologie GmbH Page 2
___________________________________________________________________________
1. Kit components
The kit contains 6 main components:
1.1. controller and operator unit
The controller manages the switch over between
diesel and SVO/WVO. It is not a huge
programming adventure, just a switch for the
driver to choose SVO/WVO or diesel and to purge
the system. All other things will work out
automatically. The controller transfers even the
signals from our load module, which is a standard
for all our kits for pickups with a DI-engine.
Furthermore the controller includes all relays,
fuses and a fuel gauge which is compatible to our
sensor and fuel tank. A wire harness is available.
1.2. ELSBETT hybrid converter
This part is the heart of the system what let your car
become a FFV (flexible fuel vehicle). This unit
contains all well known ELSBETT 2-tank-parts, like
fuel controller, fuel filters, valves, bleeding pump and
a high performance fuel preheater. This unit was
developed especially for the newest generation of
diesel injection systems like Bosch Common Rail. For
very extreme climate conditions the unit can be
equipped with an optional electrical filter heater.
1.3. Additional fuel transfer pumps
All ELSBETT 2-tank kits contain additional
electrical fuel transfer pumps. They were
developed especially for the use of SVO/WVO.
These pumps are available for 12V and 24V
systems.
__________________________________________________________________________________________
Managing Director: Klaus Elsbett • AG Nürnberg, HRB 1568 • Ust.Id.Nr. DE 133 516 565
Raiffeisenbank Greding-Thalmässing • BLZ 760 694 62 • Konto 323 44 44
IBAN DE 23 760 694 620 003 234 444 • BIC GENO DE F1 GDG