download / 3.6 MB - iNELS

2007
2007 Laser for product description
Laser for product description
Laser product printing of products replaces tampoprint. This
brings accuracy and description quality, legibility and description
of other parts of the enclosure “in one go” on the
fully automatic laser printing line. Each product has its unique
code for its easier identification.
15
2011
2011 SHT-4
Digital time switch clock with
astronomical program serves to control lighting (billboards,
advertisements, shop windows, etc.) based on the astronomical
clock function without using light sensors, can be interrupted.
Astronomically controlled switching based on sunrise
and sunset based on the Earth’s position. Preset coordinates
for European cities, option of manual setting of coordinates.
2008
2008 HRN-632008
HRN-632008
An novelty in the series of monitoring voltage relays is the
HRN-63, which monitors voltage in a range of AC 48 – 276 V.
This type of relay can monitor overvoltage and undervoltage
separately, the same as for the new relay type HRN-67, which
is similar to the HRN-63 in that it monitors voltage in a range
of AC 24 – 150 V. For both these single-phase designs, the lower
voltage level (Umin) is set in % of the upper level (Umax).
2012
2012 DA2-22M
This is an upgraded version
of the previous dimmer DA2-22M (dims loads R-L-C). The innovated
version includes not only R-L-C but also ESL (energy
saving fluorescent lamps) and category 1 and 2 LED light
sources. The load type is selected for every channel by the
switch on the front panel, as is the minimum brightness for
eliminating flickering light at the lower end.
A L W A Y S S O M E T H I N G M O R E