Antique & Art Auction Antique & Art Auction - Cordys

472
A George III period silver pair cased
pocket watch by James Jones of
London, key wind verge movement,
signed and with pierced and floral
engraved cock, numbered 12667,
the matching hallmarked cases for
London 1810, the white enamel dial
with Arabic numerals and subsidiary
seconds dial, with key, some hallmarks
worn. See page 25. $850
473
A quality early 20thC Baume 18ct yellow
goldgent’s chronograph pocket
watch, stem wind movement, the white
enamel dial with a sweeping stopwatch
hand and two subsidiary dials for 60
seconds and 30 minute recording, the
heavy case with two exterior buttons,
the interior back cover with presentation
inscription to Matthew Gray nasmith
‘By the Gisborne racing club ........
Faithful Services Secretary for twenty
years. Sept. 18th 1908’. Total weight
123 gms, good working order. See page
25. $2000
474
An early 20thC 18ct. yellow gold gent’s
Waltham pocket watch, the open face
with a white enamel dial, black roman
numerals, subsidiary seconds dial,
stem wind movement, the interior back
plate with presentation engraving to J.T.
cocker, honorary organist June 1917,
good working order. See page 25 $1100
475
A 19thC gent’s silver key wind pocket
watch, the open face with perspex
cover, the enamel dial with hairline
cracks, roman numerals and subsidiary
dial, working order, complete with
curb link fob chain. . $180
476
A vintage Waltham gold plated gent’s
full hunter pocket watch, stem wind
seven jewel movement, good working
order. $130
477
A vintage gent’s Omega pocket
watch, gold plated case, silvered dial
with Arabic numerals to the quarters,
automatic movement, leather strap,
working order. $220
478
A quality late 19thC French carriage
clock, the brass case with silvered highlights,
the white enamel dial with black
Roman numerals, the key wind movement
striking on a gong. Pivoting handle
to the top. Height 150, width 95, depth
86, working order. See page 25. $600
479
An early 20thC brass ship’s lantern type
clock with three faces, the cylindrical
body with a circular silvered dial for
clock, similar for barometer and other
for thermometer. the top with ring
handle above housing for compass, all
supported by three pillared supports.
Height 240. See page 25. $950
480
A 19thC brass skeleton clock, fusee
movement with axe form hammer
striking the bell above the movement
with traditional brass fretwork cut and
turned frame, white enamelled chapter
ring with black roman numerals,
all on a white marble oval base, glass
dome missing. Height 460, recently
overhauled. See page 25. $1200
481
A fine early 19thC mahogany mantel
clock, bevelled glass to the sides, top
and front enclosing a silvered dial with
roman numerals, 2 train 8 day fusee
movement striking on a gong, the rectangular
section cased with an ogee band
to the plinth base, compressed bun feet,
recently overhauled. Height 245, width
176, depth 125. See page 25. $1100
482
A 19thC Black Forest mantel style cuckoo
clock, the ornately carved oak case
with carved and fretwork decoration to
the triangular pediment, carved bone
hands and roman numerals to the circular
face, further fretwork and carved to
the front base and fluted column capitals,
the pediment including a cuckoo
bird behind a door, ebonised highlights,
gong striking movement. Height 605,
recently overhauled See page 25. $1000
483
A 19thC French gilt brass Achille Brocot
bracket clock, the front with a circular
porcelain dial and shaped panels, hand
painted in blue, Arabic numerals, the
face flanked by neoclassical caryatids,
turned finials, various other restrained
decoration, four fancy scrolling feet,
the circular movement marked A Star
B for Achille Brocot, striking on a gong.
Working, note of provenance attached.
Height 450. See page 25. $2200
484
A 19thC bronzed spelter mystery clock
as the goddess Diana with her bow and
a quiver of arrows, her right arm raised
and holding an ormolu bracket from
which is suspended on three chains a
blue enamel spherical clock. the hours
are indicated by affixed brass Roman
numerals, with brass hands, the escapement
appears as a vane on the top of
the globe and is actioned against a steel
pointer suspended from the bracket
above. All raised on a neoclassical plinth
base with arched break front to conform
with the suspended position of the globe.
Height 110, recently overhauled. $2250
485
A German brass 400 day clock under a
glass dome, raised on an integral plinth
base, the pendulum suspension requiring
replacement, white enamel dial
with Arabic numerals. Height overall
300. $250
486
A Victorian period walnut framed
circular wall clock, the painted face
marked W.J. carroll, 33 Walbrook, and
beneath the winding hole ‘Bank’, with
roman numerals and steel hands.
diameter 380. See page 25. $300
487
A good George III period mahogany
framed circular wall clock with brass
bezel, silvered dial engraved Rob
Wood and black enamelled roman
numerals indicating the hours and minutes
in Arabic numerals at five minute
divisions. Scratch engraved to the
back of the case with various dates
ranging from 1710-1903. the fusee
movement with brass bob pendulum.
diameter 395. See page 25. $900
488
A NZ Government mahogany framed
circular wall clock, the white enamel
dial with Arabic numerals and subsidiary
seconds dial at 12, the case
marked ‘N.Z.G.’. Diameter 280. $300
489
An Art Deco period ‘Standard Triumph’
plastic advertising electric wall clock. in
cut powder blue and peachy/tan panels,
white dial. Working. Height 400. $220
490
A vintage brass topping/cutting tool,
hand operated with scrolling arm fly
wheel, various pulleys, gauges, arms,
etc., mounted to wooden board, complete
with box of cutters. diameter of
largest wheel 175. $100
491
Two vintage Jacot watchmaker’s tools,
bow operated pivot lathes of French
manufacturer, the red finished cases
marked ‘Tour A Pivoter’, brass and steel
bodies and fittings. $100
492
Four vintage watchmaker’s tools includes
a wheel riveting set, small staking
tool punches, bow driven pullies
and watch screws, taps and dyes. $120
493
Five vintage watchmaker’s cased
tools, includes a rare bow cutter, bow
operated pivot lathe, two watch spring
winders and tools for replacing broken
jewels. $110
494
Three vintage watchmaker’s tools,
includes, old facing lathe, hand operated
fly wheel with clamp and other
brass tool. $100
495
Five various old watchmaker’s tools,
includes two presses for inserting crystals,
watch glass dies, other press and
clamp. $100
496
Four various watchmaker’s vintage
tools, includes two small depthing
tools (one boxed) and two small pivot
lathes. $80
497
A vintage cased Swiss large staking set
complete in fitted case with press etc. $80
498
Four various vintage watchmaker’s
tools, includes watch glass press,
depthing tool, wheel riveting set and
cased jacot tool. $100
499
Five various old watchmaker’s tools,
includes small staking tool set, cased
balance tool, topping tool cutters and
two others. $100
500
A mid 20thC clockmaker’s portable
tool kit in fitted case, the hinged lid
and full front revealing three fitted sliding
shelves and base drawer, fully fitted
with various tools. $200
501
A case of 11 small vintage watchmaker’s
tools including cased rollers, watch
balancing anvils, topping set, spring
winder, turns, die plates, etc. $110
502
A good quality heavy brass cased
carriage clock with a leather travelling
case. the clock with an enamel annular
dial with Arabic numerals and blued
steel hands, movement with two going
barrels, striking on a gong. Height 175.
See page 25. $500
503
A 19thC French gilt metal mantel
clock, Louis XVI style, decorated with
birds, leaves, garlands and scrolls and
set with painted pink Sevres porcelain
panels, the eight day pendulum movement
with silk suspension striking on a
19