Ferno Australia Export Catalogue

Height Safety Softgoods and Kits
24
Harness Assist
The Harness Assist is specifically designed to minimise the effects of suspension trauma.
In the event of a fall an adjustable twin foot loop is deployed allowing the user to stand
and transfer their weight directly to the anchor point greatly relieving pressure from the
harness – one of the major contributing factors to suspension trauma symptoms. The
Harness Assist is available in varying options allowing versatility for various users and
scenarios. All options are lightweight at approximately 150 g.
Option 1 Harness Upgrade Code “HS-HA”
This option can be retrofitted to any harness and is manually deployed after a fall. It
attaches to the rear free fall arrest attachment point of any existing harness and can be
purchased separately and retrofitted in the field. It is neatly packaged and concealed
within a small, unobtrusive pack which is fitted to the harness close to the user’s chest
ready for quick deployment.
Option 2 Harness Integrated Code “HS-FHHA”
This option is integrated into the harness during production and is generally made to
order. It is manually deployed ensuring immediate access to the adjustable foot loops. It is
supplied in a neat, unobtrusive pack which is fitted to the harness close to the user’s chest
ready for quick deployment. (Only available on Hi-Safe Harness range page 4, 5 & 6).
Option 3 Lanyard Integrated Code “HS-LYHA”
A great addition to any lanyard with the secure knowledge that an automatic
deployment occurs in the event of a fall. This version of the harness assist is integrated
into the lanyard and is generally made to order with many of the lanyard options shown.
It is very slim line, light weight and conveniently packaged within the energy absorbing
pouch of the lanyard. (Not available on Adjustable Multi-Purpose Lanyards).
Adjustable Multi-Purpose Lanyards
Code VAI ADJ EA FAL (1), VAI EA ARL1A (2), VAI EA ARL2A (3)
Simple to inspect, maintain and use, Ferno’s range of adjustable multi-purpose
lanyards are ideal for use in a variety of situations including elevated work platforms
and all general work at height scenarios.
The durable rope construction in conjunction with a rope grab allows the user to
adjust the lanyard length from 60 cm to 200 cm ensuring the perfect length lanyard
for each working scenario. Australian Standards approved to AS/NZS 1891.1:2007.
Code Description
VAI ADJ EA FAL Single assembly, supplied with alloy ISC rope grab (EN353 rated)
VAI EA ARL1A Single, economical, all steel rope grab and hardware
VAI EA ARL2A Twin tail economical, all steel rope grab and hardware
Energy Absorber (only)
In the event of a fall, energy absorbers deploy an additional length of
webbing that is designed to absorb the force or shock load experienced.
Code Hardware Selection Length
HS-SA10 Screw Gate Karabiner/Screw Gate Karabiner 60 cm
HS-SA20 D-ring/Screw Gate Karabiner 60 cm
HS-SA30 Double Action Hook/Screw Gate Karabiner 60 cm
Option 1
Option 2
Option 3
VAI ADJ EA FAL
VAI EA ARL1A
VAI EA ARL2A
HS-SA10
HS-SA20
HS-SA30