Ferno Australia Export Catalogue

Stretcher Accessories
6
Ferno Patient Restraints
Ferno offers a complete range of restraints with various colour and length
options. These include:
BRR-TRAVREST Two-piece five foot double bar buckle
BRR-43017 One-piece seven foot metal buckle
BRR-43017P One-piece seven foot plastic buckle
BRR-43025 Two-piece five foot metal buckle
BRR-43025SC Two-piece five foot metal buckle with speed clip connectors
BRR-43025P Two-piece five foot plastic buckle
BRR-43025PSC Two-piece five foot plastic buckle with
speed clip connectors
BRR-43027 Two-piece seven foot metal buckle
BRR-430VSC Velcro one-piece restraint,
variable in length, with speed
clip connectors
Ferno Floor Locks Code LA26-FL and LA50-FL
Made from die-cast stainless steel the Ferno Floor Lock provides unrivalled strength, yet is simple in design and use.
The stretcher floor lock hooks are designed to fully capture the front and rear attachment points of the stretcher with one
simple pull of the floor lock lever. When fitted correctly the Ferno Floor Lock combined with an approved Ferno harness
restraint will provide the user with a complete AS/NZS 4535:1999 system that safely and securely restrains a patient to the
stretcher and the stretcher to the ambulance. Ferno Floor Locks have been dynamically crash tested to 20 G forward
and 10 G sideward and are compliant with ambulance crash test
standard AS/NZS 4535:1999
LA26 FL is compatible with most
26 and 2650 series stretchers
Ferno 2427 Floor Lock Code FWMFL
This floor lock is designed to be quickly removed or fitted to a vehicle floor. The front and rear
locking mechanism is attached by steel wing-nuts, allowing removal and fitting by hand to
the fixed, low profile base. This allows full access and storage space in the vehicle for other
equipment when a stretcher is not required. The rear locking mechanism utilises a simple but
effective spring loaded pistol grip handle that captures the rear of the stretcher but swings
low when not in use. Ideal for multi-purpose fleet vehicles or situations where low speed
transportation is required. Made from heavy-duty steel with a chrome plated finish. The Ferno
2427 does not meet all aspects of ambulance crash test standard AS/NZS 4535:1999.
Ferno 2030 IV Pole Code LAIV-2030
The Ferno 2030 IV Pole is a lightweight permanently attached IV pole that conveniently
fits within the side rail of most Ferno stretchers. For after-market installation, each Ferno
2030 IV Pole comes complete with a new side rail for quick and easy fitting. Includes
bracket mount for IV accessories and hooks for two IV bags. The IV pole is for mounting
on the (patient) left hand side of stretcher only.
LA50 FL is compatible with most
50 series stretchers
Patient Handling