Panel Assortment For The Body Repair Man - bei PICHLER ...

G 10
Wiper arm repair set model II
For the repair of rusted tight wiper arm linkages.
Set consists of:
Expressing fork - Removing the snap rings.
Punch - Deflecting the wiper axles
Wire brush - Cleaning teeth.
T-grip reamer - Cleaning and finish-reaming the locating hole.
Package of snap rings (20 pcs) in " original size"
Type: VW Sharan, Seat Alhambra, Ford Galaxy
Wiper arm repair set model II p/n 658 25 000
in a plastic box
Refilling packing of snap rings size II (20 pcs) p/n 658 25 010
Rear window washer repair set
For repairing the rear window washer.
With this tool the remainder of the broken off washer nozzle is
drilled out of the windshield wiper axle and if necessary the broken
brass tubing in the rear windshield wiper motor is repaired.
By using the windshield wiper axle screw as a guide the milling
cutter for removing the remaining nozzle or the drill
for removing the remaining riser pipe is accurately positioned.
The brass tubing is replaced by the enclosed plastic tubes..
Type : VW, Audi e.g. Golf IV, Passat, Sharan and Audi A4
Ford Galaxy, Seat Alhambra
Rear window washer repair set p/n 658 23 20
Plastic tubes 5 pcs. p/n 658 23 25
Plastic tubes 10 pcs p/n 658 23 30
Claw hook universal
Applicable with slide hammer
Impact weight 5 kg or 8 kg
This hook model with a internal thread of M18x1.5 is universally
applicable with our two slide hammers of 5 kg or 8 kg impact
weight. Generally for rough panel work on the body and in the
frame area, as well as for the disassembly of knuckles, tie rod
joints, articulated bearings of wishbones etc.
Claw hook universal p/n 953 55 30
Slide hammer complete 5kg p/n 614 87 90
Slide hammer complete 8kg p/n 614 88 00