Panel Assortment For The Body Repair Man - bei PICHLER ...

G 04
Draw hook thumb form
This draw hook is a valuable and quick link to body work. Without
the need to screw in this thumb hook can be inserted into a double
draw hook and be used e.g. connected into the eye of a draw
clamp. The downward facing tap prevents slippage of the hook.
Dead weight 450 gram, maximum tensile load 3 tons.
Draw hook thumb form in connection with double draw hook
p/n 953 55 10
Twist/pulling equipment longitudinal channel front
For stretching and truing the front longitudinal channel and the
preparation of part replacement.
The screw on plate with an interchangeable pull ring (M20) can be
used on the left and right side.
The device is screwed onto the bumper attachment. The hauling
equipment is fixed with additional clamping devices to prevent
detachment.
Type: Audi A3, VW Golf IV
Twist/hauling equipment longitudinal channel front
p/n 652 10 50
Universal telescopic gauge
This tool has extremely universal application possibilities due to
the special shape and the offset clamping plates of the gap gauge.
Because of this it is possible to close the hood or trunk lid with the
gap gauge mounted. Also with non parallel running clamping
edges the gap gauge can be used, as the clamping plates can
also be tilted. Because of the strong construction it is possible,
through pulling or pressing the mounted gap gauge to change the
gap dimension before welding.
Universal telescope gauge p/n 900 10 30
Grip wrench set 16 pcs
Wrenches with rubber-covered handles.
Apart from the special composition for body work each wrench is
equipped with comfortable skid-proof and cooling restraining
rubber grips for comfortable work.
Grip wrenches set 16 pcs with rubber-covered handles
p/n 900 50 00