ORDERING GUIDE for Cisco Aironet 1550 Series Outdoor ... - Ipland

AP 1552 ORDERING GUIDE: 

Updated on September 6, 2011 

1552E 

(External Antennas) 

AP1552 AT A GLANCE 

1552H 

(Hazardous Location) 

1552C 

(Cable Backhaul) 

1552I 

(Integrated Antennas) 

Antennas External External Integrated Integrated 

CleanAir Yes Yes Yes Yes 

ClientLink Yes Yes Yes Yes 

Fiber SFP Yes Yes - - 

PoE Out Port 1 

802.3af (e.g. for video) 

Cable Modem 

- DOCSIS 3.0 

- EuroDOCSIS 3.0 

Haz-Location 

Class1 Div2/Zone 2 

Battery Backup 

Option 

Power Options AC, DC, PoE 2 

Yes Yes - - 

- - Yes - 

- Yes - - 

Yes - - - 

2 40-90 VAC 

AC, DC, PoE Power over Cable 

AC, DC 

Note 1- Power over Ethernet. When AP1552E/H is powered via PoE, the PoE-Out port is not active. 

Note 2- PoE-in is NOT 802.3af & would not work with PoE 802.3af-capable Ethernet switch. Requires dedicated Power-Injector (AIR-PWRINJ1500-2=) 

Page 1 of 3

AP 1552 ORDERING GUIDE: 

Updated on September 6, 2011 

AP1552E 

(External Antennas) 

AP1552H 

(Hazardous Location) 

AP1552C 

(Cable Backhaul) 

AP1552I 

(Integrated Antennas) 

Step 1. Select the Product ID (PID) AIR-CAP1552E-x-K9 AIR-CAP1552H-x-K9 AIR-CAP1552C-x-K9 AIR-CAP1552I-x-K9 

Step2. - Determine the "x" Regulatory Domain 

- Determine Product Country Availability 

AIR-CAP1552E-A-K9 

AIR-CAP1552E-C-K9 

AIR-CAP1552E-E-K9 

AIR-CAP1552E-K-K9 

AIR-CAP1552E-M-K9 

AIR-CAP1552E-N-K9 

AIR-CAP1552E-Q-K9 

AIR-CAP1552E-R-K9 

AIR-CAP1552E-S-K9 

AIR-CAP1552E-T-K9 

AIR-CAP1552H-A-K9 

AIR-CAP1552H-E-K9 

AIR-CAP1552H-M-K9 

AIR-CAP1552H-N-K9 

AIR-CAP1552H-S-K9 

AIR-CAP1552C-A-K9 

AIR-CAP1552C-E-K9 

AIR-CAP1552C-N-K9 

AIR-CAP1552C-Q-K9 

AIR-CAP1552I-A-K9 

AIR-CAP1552I-E-K9 

AIR-CAP1552I-K-K9 

AIR-CAP1552I-N-K9 

Step 3. Select SW load version S155W8K9-12423JA S155W8K9-12423JA S155W8K9-12423JA S155W8K9-12423JA 

Step 4. Order 3x Antennas per AP 

(if applicable) 

AIR-ANT2547V-N AIR-ANT2547V-N 

n/a 

Antenna Integrated in AP 

n/a 

Antenna Integrated in AP 

Step 5. Order Mounting Kit AIR-ACCPMK1550= AIR-ACCPMK1550= AIR-ACCSMK1550= AIR-ACCPMK1550= 

COMMENTS 

1. Go to Table 3 (802.11abgn Mesh Access Points) of the Wireless LAN Compliance Status URL: 

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd8 

0537b6a.html#wp9006229 

2. Look for name of country (Column 1) where this product will be deployed. 

3. Ensure that the AP product & model-of-interest is available in said country by looking at checked 

cross box (Country/Product model) 

4. Replace "x" in PID of "Step 1" with "Regulatory Domain" letter of said country which is found 

in column 2 of Table 3. 

5. Log-On Ordering Tool (http://www.cisco.com/web/ordering/root/index.html) & enter PID. 

6. If product in desired country is not available, do NOT enter the order; it will be held up & not 

....shipped. Contact your Cisco Acccount Manager. 

- To Date there is only one SW load available. This applies to all the AP1550 models. 

- SW is an option under the AP selection in the Configuration tool (at $0 charge). 

- Currently the only configurable antenna available for the AP1552 is the (AIR-ANT2547V-N) 

- Ant. can also be ordered as a spare (AIR-ANT2547V-N=) (spares denoted by "=" at end of PID) 

- Typically when item is ordered as an "option" it is shipped in same box as AP. 

- Typically when item is ordered as a "spare" it is shipped in a separte box from the AP. 

- Three (3) of these antennas are needed for each of AP1552E or AP1552H 

- For AP1552C & AP1552I Antenna integrated into AP. No additional antennas needed. 

- The Wall/Pole-Mount-Kit (PMK) works on the AP1552E, AP1552H, and AP1552I 

- The PMK is ordered as a "Spare" (not as an option) and is shipped separately from the AP. 

- Do not use the older (AIR-ACCPMK1500=) or (AIR-ACCPMK1520=) PMK with the AP1552E/H/I. 

- The AP1552C inlcudes a "Strand Mount Kit" (SMK) "option" at $0 charge with the AP1552C 

- The AP1552C SMK "option" must be selected as part of the AP1552C config. when ordering. 

- The AP1552C SMK "option" is shipped in the same box as the AP1552C unit. 

- The AP1552C SMK can also be ordered as a spare for an additional charge (AIR-ACCSMK1550=) 

PIDs above this row are Unique to AP1550 Series / PIDs Below this row apply to both AP1520 & AP1550 Series 

Step 6. Select Powering Option - Note: some APs can be powered by more than one method (PoE, AC, DC) 

Step 6.1. If PoE, Select PoE-Injector AIR-PWRINJ1500-2= AIR-PWRINJ1500-2= n/a n/a - Note: The CAT5 cable is not sourced by Cisco. 

Step 6.2. If AC, Select Power-Cable-Option 

(select only one of the three options) 

AIR-CORD-R3P-40NA= 

AIR-CORD-R3P-40UE= 

AIR-PWR-ST-LT-R3P= 

n/a n/a 

AIR-CORD-R3P-40NA= 



(AIR-CORD-R3P-40NA=) AC power cord, 40 ft. (12.2 m) with North American plug termination 

(AIR-CORD-R3P-40UE=) AC power cord, 40 ft (12.2 m) with European unterminated end 

(AIR-PWR-ST-LT-R3P=) AC Power cord, 4 ft (1.2 m), connects to Street-Light power 

Step 6.3. Select Battery Backup AIR-1520-BATT-6AH= n/a n/a n/a - Battery Backup Option. Do NOT use the (AIR-1520-BATT-6AH=) Battery with the AP1552H 

Step 7. Select Fiber-Backhaul Option 

Step 7.1. Order REEL Installation Kit AIR-1520-FIB-REEL= AIR-1520-FIB-REEL= n/a n/a 

Step 7.2. Select Fiber SFP 

(select only one of the two options) 

GLC-SX-MM-RGD= 

GLC-LX-SM-RGD= 

GLC-SX-MM-RGD= 

GLC-LX-SM-RGD= n/a n/a 

Step 8. PMK Installation Tool AIR-BAND-INST-TL= AIR-BAND-INST-TL= n/a AIR-BAND-INST-TL= 

* n/a: Not Applicable 

Additional Useful Sources of information on the Aironet 1550 Series: 

- Main Page: http://www.cisco.com/en/US/products/ps11451/index.html 

- Data Sheet: http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html 

- Install & Upgrade Guides: http://www.cisco.com/en/US/products/ps11451/prod_installation_guides_list.html 

- Country Compliance (Table 3): http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.html#wp9006229 

- Fiber or Ethernet backhaul needs to only be used on the Root Access Point (RAP) 

- Fiber Backhaul is not needed if AP is using Ethernet backhaul (RAP) or Mesh backhaul (MAP). 

- REEL kit is optional but recommended. Used to wrap & guide extra fiber inside AP unit 

- Items 7.1 & 7.2 replace older (GLC-FE-100BX-URGD=) that inlcuded REEL kit & a 100BASE SFP 

(GLC-SX-MM-RGD=) 1000BaseSX multi-mode Rugged SFP 

(GLC-LX-SM-RGD=) 1000BaseLX single-mode Rugged SFP (long reach) 

- This Pole-Mount-Kit (PMK) Installation Tool is to firmly install the PMK band around the pole. 

- Only one is needed per installation crew. 

Page 2 of 3

NOTES: 

- Product ID (PID) ending with an “=“ sign indicates that 

item is ordered as a “Spare” rather than as an “Option” 

- Options are usually shipped in the same package with 

the AP or are already installed inside the AP before 

shipping. 

1. Only one SW & Antenna options are available at this 

time 

Step 1: Select AP type 

AIR-CAP1552E-x-K9 

AIR-CAP1552H-x-K9 

AIR-CAP1552C-x-K9 

AIR-CAP1552I-x-K9 

Step 2 Select Regulatory Domain “x” 

AIR-CAP1552E-A-K9 AIR-CAP1552E-N-K9 

AIR-CAP1552E-C-K9 AIR-CAP1552E-Q-K9 

AIR-CAP1552E-E-K9 AIR-CAP1552E-R-K9 

AIR-CAP1552E-K-K9 AIR-CAP1552E-S-K9 

AIR-CAP1552E-M-K9 AIR-CAP1552E-T-K9 

See Table 3 of: 

http://www.cisco.com/en/US/prod/collateral/w 

ireless/ps5679/ps5861/product_data_sheet0900 

aecd80537b6a.html 

Step 3 Select SW Option 1 

Option1: S155W8K9-12423JA 

Step 4 Select Antenna Option 1 

Option1: AIR-ANT2547V-N (x3) option 

AIR-ANT2547V-N= (x3) spare 

Step 5 Order Wall/Pole/Street-light Mounting Kit 

Wall/Pole-Mount-Kit: AIR-ACCPMK1550= 

Step 6 Select Powering Option 

PoE Injector: AIR-PWRINJ1500-2= 

AC Cable: AIR-CORD-R3P-40NA= 



Battery backup: AIR-1520-BATT-6AH= 

Step 7 Select Fiber Backhaul Option 

Reel Kit: AIR-1520-FIB-REEL= 

Fiber SFP: GLC-SX-MM-RGD= 


Step 8 Order Mounting Kit Installation-Tool 

Install Tool: AIR-BAND-INST-TL= 

Cisco Confidential © 2011 Cisco and/or its affiliates. All rights reserved. 

4

NOTES: 



- Options are shipped in the same package with the AP or 

are already installed inside the AP before shipping. 

- Not available in Australia nor in Brazil (IECEx) 

1. Only one SW & Antenna option are available at this time 

2. AC Cable is un-terminated & is provided by the installer. 

This is the most commonly used powering option. 

3. Battery option is NOT available on the AP1552H 







AIR-CAP1552H-A-K9 AIR-CAP1552H-N-K9 

AIR-CAP1552H-E-K9 AIR-CAP1552H-S-K9 

AIR-CAP1552H-M-K9 








Option1: AIR-ANT2547V-N (x3) option 

AIR-ANT2547V-N= (x3) spare 




PoE Injector: AIR-PWRINJ1500-2= 

AC Cable: n/a 2 

Battery: n/a 3 


Reel Kit: AIR-1520-FIB-REEL= 

Fiber SFP: GLC-SX-MM-RGD= 





5

NOTES: 





1. Only one SW option is available at this time 

2. Antennas Integrated (Built-in) 

3. Strand-Mount-Kit is at ($0) when ordered as an option with 

the AP1552C. 

4. Power-over-Cable. No powering option is needed. 

5. Backhaul-over-cable. No fiber backhaul option is available. 

6. Tool is standard screw/nut installation equipment 







AIR-CAP1552C-A-K9 AIR-CAP1552C-N-K9 

AIR-CAP1552C-E-K9 AIR-CAP1552C-Q-K9 








n/a 

Step 5 Order Strand Mounting Kit 3 

Strand-Mount-Kit: AIR-ACCSMK1550= 

Step 6 Select Powering Option 4 

n/a 

Step 7 Select Fiber Backhaul Option 5 

n/a 

Step 8 Order Strand Mount Kit Installation-Tool 6 

n/a 


6

NOTES: 





1. Only one SW option is available at this time 

2. Antennas Integrated (Built-in) 

3. PoE option/ Power-Injector is NOT available on AP1552I 

4. Battery option is NOT available on the AP1552I 

5. Fiber option is NOT available on the AP1552I 







AIR-CAP1552I-A-K9 AIR-CAP1552I-K-K9 

AIR-CAP1552I-E-K9 AIR-CAP1552I-N-K9 








n/a 




Power Injectors:n/a 3 

AC Cable: AIR-CORD-R3P-40NA= 



Battery: n/a 4 


n/a 5 




7

1- Check 802.11abgn_Mesh_Access_Points section (Table 3); the Wireless LAN Compliance Status for the most up-to-date country compliance. 

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps430_Products_Data_Sheet.html 


8

Additional Useful Sources of information on the Aironet 1550 Series: 

- AP1550 Series Home Page: 

http://www.cisco.com/en/US/products/ps11451/index.html 

- Data Sheet: 

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html 

- Install & Upgrade Guides: 

http://www.cisco.com/en/US/products/ps11451/prod_installation_guides_list.html 

- Country Compliance (Table 3): 

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps430_Products_Data_Sheet.htm 


9

ORDERING GUIDE for Cisco Aironet 1550 Series Outdoor ... - Ipland

Create successful ePaper yourself

Delete template?

Save as template?