Flow Control KTM Ball Valves - Valves and Controls

KTM Ball Valves
Metaltite Metal Seated Valves - 1/2" to 20"
Valve Selection and Seat Designs
Valve Type: Single V
Model No.: (WO 400/600)
Seat Design/ A-1/Class IV
Seal Class: A-2/Class II
Characteristics:
Temp -20°F to 482°F, Single seat
Uni-directional Trunnion Design
ANSI 150/300, 1" to 20"
Modulating, On/Off
Valve Type: Dual V
Model No.: (WA Series)
Seat Design/Seal Class: B/Class V
Characteristics:
Temp -20°F to 518°F, Single seat
Uni-directional Trunnion Design
ANSI 150/300, 1" to 8"
Modulating, On/Off
Valve Type: Omni II
Model No.: (EB100)
Seat Design/Seal Class: C/Class V
Characteristics:
Temp -20°F to 932°F, Two seats
Bi-directional Floating Design
ANSI 150/300, 1/2" to 8"
On/Off
Valve Type: Trunnion
Model No.: (EO1200)
Seat Design/ D/Class V
Seal Class: E/Class V
F/Class V
G/Class V
Characteristics:
Temp -20°F to 932°F, Two seats
Bi-directional or Single seat
Uni-directional Trunnion Design
ANSI 150/300, 2" to 20"
ANSI 600, 2" to 16"
On/Off
Valve Type: Y-Pattern Diverter
Model No.: (E3700)
Seat Design/Seal Class: H/Class V
Characteristics:
Temp -20°F to 482°F, Three seats
Trunnion Design
ANSI 150/300, 1" to 12"
ANSI 600, 1" to 3"
Diverting
Wonder Wonder Valve Valve (V-port) (V-port)
Omni 2
Copyright © 2009 Tyco Flow Control. All rights reserved. KTMMC-0550
26
Omni 2
A-1 A-2
Class IV, Laminated seat Class II, Thick seat
B
D-D
6" to 20"
Same seat applies to both sides.
Class V, Spring loaded stellited seat
C-1 C-2
Bi-directional: Preferred flow is cap to body.
Scraper type with powder guard seals max. temp. 482°F
F-F
G-G
6" to 20"
H
Standard type
max. temp. 482°F
E-E
2" to 4"
High temperature
applications max. temp.
932°F